• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1996년도 춘계공동학술대회논문집; 공군사관학교, 청주; 26-27 Apr. 1996
• /
• pp.389-394
• /
• 1996

The product-user interface for consumer electronic products became complex due to the increased variety of functions corresponding to consumer needs. In this study, three types fo design improvement of the menu interface for a video cassette recorder is studied. Three modifications to an existing menu interface was designed using the semantic, the syntactic and the lexical design factors. A series of the validation experiments was performed to test the effect of the three types of task modifications. The results showed that performance time, number of errors and learning effect were improved for all task modification. It also showed that the performance improvement effect of the semantic factors was 8.8%, that of the syntactic factors was 5.9% and that of the lexical factors was 5.6% respectively. It was found out that the performance improvement effect of the semantic design factors were relatively more significant than the syntactic and the lexical design factors.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 춘계 학술발표회논문집
• /
• pp.377-384
• /
• 2003

Recently, there are much concerns about new and innovative transverse materials which could be used instead of conventional transverse steel in reinforced concrete bridge piers. FRP materials could be substituted for conventional transverse steel because of their sufficient strength, light weight, easy fabrication, and useful applicability to any shapes of pier sections, such as rectangular or circular sections. The objective of this research is to evaluate the seismic performance of reinforced concrete bridge pier specimens with FRP transverse reinforcement by means of the Quasi-Static test. In the first task, test columns were made using FRP rope, but these specimens appeared to fail at low displacement ductility levels due to insufficient confinement of strand extension itself. Therefore, the second task was to evaluate the seismic performance of test specimens transversely confined with FRP band. Although FRP banded specimens showed lower seismic performance than the specimen with spiral reinforcing steel, it satisfied with the response modification factor, 3, required for the single column of Korea bridge roadway design code. It was concluded that FRP band could be efficiently substituted for conventional reinforcing steel.

• 대한인간공학회지
• /
• 제25권2호
• /
• pp.43-50
• /
• 2006

The purpose of this study was to investigate applicability of NIOSH lifting equation(NLE) to analysis of workload for patient transferring. In principle, the NLE is not applied to analyzing workload of patient transferring, because 1) the task is generally performed by two or more persons; 2) unlike ordinary objects, human body of patients is basically unstable load with their location of the center of mass significantly varying during lifting activity; and 3) the task is done in a restricted work space. This study was conducted through comparison of NIOSH lifting indexes(LIs) and L5/S1 compressive forces by 3DSSPP for patient transferring tasks performed by 2~6 persons. The results showed that LIs are linearly correlated with L5/S1 compressive forces with correlation coefficient of 0.92, which resulted in a significant simple linear regression equation for LIs and L5/S1 compressive forces. Consequently, it was concluded that the NLE is applicable to transferring patient only with slight modification. Based on the results, instead of 1.0 originally used by NIOSH, the LI of 1.5 was proposed as a gauge to estimate whether or not the task needs corrective action to reduce risk for developing lifting-related low back pain.

• 제어로봇시스템학회논문지
• /
• 제8권1호
• /
• pp.15-20
• /
• 2002

An electro-hydraulic manipulator using hydraulic actuators has many nonlinear elements, and its parameter fluctuations are greater than those of an electrically driven manipulator. So it is relatively difficult to realize not only stable contact work but also accurate force control for the automatic assembly tasks using hydraulic manipulators. In this manuscript, we applied a compliance control, which is based on the position control by a disturbance observer for our manipulator system. A reference trajectory modification method is proposed in order to achieve accurate force control even though the stiffness and the position of the environment change. Experimental results show that highly robust force tracking by a 6-link electro-hydraulic manipulator could be achieved under various environment conditions. The proposed force control algorithm is applied to the approaching of bolt and the wrenching of nut tasks as one typical task in the maintenance work of live power electric line and is experimentally confirmed very effective for the task.

• The Journal of Korean Physical Therapy
• /
• 제26권3호
• /
• pp.191-195
• /
• 2014

Purpose: The purpose of this study is to investigate whether types of sensory-stimuli cues in terms of visual, auditory, and visuoauditory cues can be affected to motor sequential learning in healthy adults, using serial reaction time task. Methods: Twenty four healthy subjects participated in this study, who were randomly allocated into three groups, in terms of visual-stimuli (VS) group, auditory-stimuli (AS) group, and visuoauditory-stimuli (VAS) group. In SRT task, eight Arabic numbers were adopted as presentational stimulus, which were composed of three different types of presentational modules, in terms of visual, auditory, and visuoauditory stimuli. On an experiment, all subjects performed total 3 sessions relevant to each stimulus module with a pause of 10 minutes for training and pre-/post-tests. At the pre- and post-tests, reaction time and accuracy were calculated. Results: In reaction time, significant differences were founded in terms of between-subjects, within-subjects, and interaction effect for group ${\times}$ repeated factor. In accuracy, no significant differences were observed in between-group and interaction effect for groups ${\times}$ repeated factor. However, a significant main effect of within-subjects was observed. In addition, a significant difference was showed in comparison of differences of changes between the pre- and post-test only in the reaction time among three groups. Conclusion: This study suggest that short-term sequential motor training on one day induced behavioral modification, such as speed and accuracy of motor response. In addition, we found that motor training using visual-stimuli cue showed better effect of motor skill acquisition, compared to auditory and visuoauditory-stimuli cues.

• 조명전기설비학회논문지
• /
• 제23권1호
• /
• pp.18-26
• /
• 2009

최근, 에너지 절감 및 환경보전의 한 방법으로서 LED광원을 이용한 고효율 조명기기의 요구가 증가하고 있다. 그러나 LED광원을 이용한 조명기기는 실내공간의 용도 및 사용자에 대한 고려를 배제한 채, 색상 및 패턴이 결정되어 시각적 불쾌감을 초래하고 있다. 이에 본 연구는 LED광원을 이용한 국부조명의 CCT의 변화가 작업자의 시작업 성능에 미치는 영향을 분석하여 실내공간의 용도 및 사용자를 고려한 조명 설계에 기초자료를 제시하고자 한다. 본 연구를 위해 2 종류의 LED광원과 1종류의 형광광원을 선정하였으며, 대학생 30명을 대상으로 오류수정작업과 읽기작업에 대한 정확도 및 소요시간을 평가하였다. 시작업 성능평가 결과, LED광원에서 오류수정 작업의 정확도는 형광광원에 비해 최대 2.5[%]가 증가되었으며, 소요시간은 최대 17.1[%]가 감소되었다. 또한 읽기작업 결과 소요시간은 LED광원에서 20.6[%]가 감소하였다.

• 한국융합학회논문지
• /
• 제9권6호
• /
• pp.69-75
• /
• 2018

제조업에 있어 공정의 효율성은 제품의 경쟁력과 직결되는 중요한 요소이다. 특히 최근 여러 국가와 FTA체결로 인해 국내외 제조업이 치열한 경쟁에 직면함에 따라 생산시간을 보다 단축하기 위한 정교한 작업관리 시스템이 요구되고 있다. 본 연구에서는 동작분석 솔루션을 활용하여 제조공정의 효율성을 제고하는 방안을 모색하고자 한다. 동작분석 솔루션을 활용하여 최적화 검증 후 제조공정을 개선할 경우 추가적인 공정 수정 또는 보완에 소요되는 비용을 절감할 수 있으며, 기업의 생산성 향상이라는 실질적 효과를 도출할 수 있다. 본 연구를 통해 작업현장의 낭비개선, 작업편성효율개선, 기종교체시간 단축, 표준시간 측정 및 작업시스템 표준화 등을 구현할 수 있다.

• 제어로봇시스템학회논문지
• /
• 제20권11호
• /
• pp.1092-1097
• /
• 2014

Unmanned flying robots have been used recently in many difficult situations. One of the major issues in this area is the problem of how long these unmanned flying robots can perform a given task successfully. For this, the development of a light body and high-efficiency power supply has been executed widely, but we do not as yet have the complete solution. In this paper, we propose a form of Multi-Copter X8, which can transform into other types to further improve these problems. The proposed robot has a 3-type modification capability, which can produce a more enhanced energy saving effect by reducing power consumption.

• 한국의학물리학회지:의학물리
• /
• 제32권4호
• /
• pp.172-178
• /
• 2021

Purpose: This study aimed to develop a deep learning architecture combining two task models to generate synthetic computed tomography (sCT) images from low-tesla magnetic resonance (MR) images to improve metallic marker visibility. Methods: Twenty-three patients with cervical cancer treated with intracavitary radiotherapy (ICR) were retrospectively enrolled, and images were acquired using both a computed tomography (CT) scanner and a low-tesla MR machine. The CT images were aligned to the corresponding MR images using a deformable registration, and the metallic dummy source markers were delineated using threshold-based segmentation followed by manual modification. The deformed CT (dCT), MR, and segmentation mask pairs were used for training and testing. The sCT generation model has a cascaded three-dimensional (3D) U-Net-based architecture that converts MR images to CT images and segments the metallic marker. The performance of the model was evaluated with intensity-based comparison metrics. Results: The proposed model with segmentation loss outperformed the 3D U-Net in terms of errors between the sCT and dCT. The structural similarity score difference was not significant. Conclusions: Our study shows the two-task-based deep learning models for generating the sCT images using low-tesla MR images for 3D ICR. This approach will be useful to the MR-only workflow in high-dose-rate brachytherapy.

• 한국초등수학교육학회지
• /
• 제14권3호
• /
• pp.745-768
• /
• 2010

본 연구는 수준이 다른 여러 영재 집단의 소속 학생들이 도형수와 관련된 과제를 해결하고 창의적 산출물을 도출하는 가운데 그들의 수학적 사고력과 창의적인 아이디어를 발휘할 수 있도록 수준별 수학 영재 교수 학습 자료를 개발하는 절차와 방법을 탐구해 보는 데 그 목적이 있다. 이를 위해 교수 학습 자료 개발의 준거와 절차 모형에 따라 도형수 과제의 교수 학습 자료의 원형과 실제적인 자료를 개발하고 그것을 현장 수업에 적용하면서 학생들의 다양한 해결과정을 분석하면서 그 자료의 문제점과 개선점을 제시하였다. 그리고 초등학교에서 집단의 수준별로 산출물 탐구가 가능한 도형수의 내용 범위를 설정해 보면서 차후 유사한 다른 수학 영재 교수 학습 자료 개발할 때 고려한 네 가지의 시사점을 제안하였다.