• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.30 no.4
• /
• pp.342-352
• /
• 2020

Objectives: The characteristics of research workers are different from those working in the manufacturing industry. Furthermore, the reagents used change according to the research due to the characteristics of the laboratory, and the amounts used vary. In addition, since the working time changes almost every day, it is difficult to adjust the time according to exposure standards. There are also difficulties in setting standards as in the manufacturing industry since laboratory environments and the types of experiments performed are all different. For these reasons, the measurement of the working environment of research workers is not realistically carried out within the legal framework, there is a concern that the accuracy of measurement results may be degraded, and there are difficulties in securing data. The exposure evaluation based on an eight-hour time-weighted average used for measuring the working environment to be studied in this study may not be appropriate, but it was judged and consequently applied as the most suitable method among the recognized test methods. Methods: The investigation of the use of chemical substances in the research laboratory, which is the subject of this study, was conducted in the order of carrying out work environment measurement, sample analysis, and result analysis. In the case of the use of chemical substances, after organizing the substances to be measured in the working environment, the research workers were asked to write down the status, frequency, and period of use. Work environment measurement and sample analysis were conducted by a recognized test method, and the results were compared with the exposure standards (TWA: time weighted average value) for chemical substances and physical factors. Results: For the substances subject to work environment measurement, the department of chemical engineering was the most exposed, followed by the department of chemistry. This can lead to exposure to a variety of chemicals in departmental laboratories that primarily deal with chemicals, including acetone, hydrogen peroxide, nitric acid, sodium hydroxide, and normal hexane. Hydrogen chloride was measured higher than the average level of domestic work environment measurements. This can suggest that researchers in research activities should also be managed within the work environment measurement system. As a result of a comparison between the professional science and technology service industry and the education service industry, which are the most similar business types to university research laboratories among the domestic work environment measurements provided by the Korea Safety and Health Agency, acetone, dichloromethane, hydrogen peroxide, sodium hydroxide, nitric acid, normal hexane, and hydrogen chloride are items that appear higher than the average level. This can also be expressed as a basis for supporting management within the work environment measurement system. Conclusions: In the case of research activity workers' work environment measurement and management, specific details can be presented as follows. When changing projects and research, work environment measurement is carried out, and work environment measurement targets and methods are determined by the measurement and analysis method determined by the Ministry of Employment and Labor. The measurement results and exposure standards apply exposure standards for chemical substances and physical factors by the Ministry of Employment and Labor. Implementation costs include safety management expenses and submission of improvement plans when exposure standards are exceeded. The results of this study were presented only for the measurement of the working environment among the minimum health management measures for research workers, but it is necessary to prepare a system to improve the level of safety and health.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.1
• /
• pp.55-69
• /
• 2021

For the national economic development, the participation of women in the social and economic activities is crucial. The popularization of start-ups, digital transformation, and WEconomy trends have lowered the barriers to opportunities for women to start a business and provide an environment in which women can grow faster. This paper examines the significance and process of success of women entrepreneurs and the characteristics of innovation strategies and achievements by linking the recently changing business environment of a company, factors influencing the success of women entrepreneurship, and innovation activities. To this end, four companies' cases were analyzed in the fields of distribution/service and consumer products/services, which are areas of large investment among female startups. The result shows that women entrepreneurs recognize the meaning of success as creating and continuing to create a 'corporate value through establishing a trust relationship with customers' within the 'balance between personal life and work.' In terms of the business ecosystem, women entrepreneurs strive for 'business activities based on the win-win growth of consumers, producers and sellers' for success, and rather 'focus on the process with a problem-solving approach' rather than achieving performance-oriented goals. Also through excellent power of observation, flexibility, and execution power, women entrepreneurs conduct business by adapting to changing trends. In terms of innovation activities, the innovation strategy of women-led companies puts priority on 'creating the value customers want' and focuses on innovation in the 'customer-centric business model' rather than technological innovation. As such, women-led companies show several differentiated characteristics, which enable them to create corporate value and achieve sustainable growth. The barriers to challenges and opportunities for women to start a business have been lowered, and an ecosystem has been created for female startups to grow. But why are there still so few women entrepreneurs, and the answer to where we need to close these gaps is ultimately a close analysis and investigation of the field. We must present milestones for growth steps through the accumulation of case studies of women startups that have exited. In addition, women can stand as economic agents only when the policy targets are subdivided and specific approaches to child-rearing and childcare for women entrepreneurs must be taken. This paper expects to serve as basic data for follow-up studies and become the basis of research for women entrepreneurs to grow as economic agents.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.49 no.4
• /
• pp.41-54
• /
• 2021

This study targets the urban park corresponding to the core areas (Hubs) of Green Infrastructure and estimates their value utilizing the Contingent Valuation Method (CVM) and determines the planning factors which affect them. The research aims to provide basic data for supporting the value improvement in the planning stage for urban parks representing green infrastructure. The primary purpose of this research is to derive variables that affect economic value and planning factors to improve the use-value of urban parks, one of the Hubs of the green infrastructure. In this study, Sejong Lake Park, located in Sejong City, is the target site. This study collected the responses of 105 people by conducting a survey on the intention to pay for the use-value and the planning factors that affect it, targeting visitors to Sejong Lake Park. The study conducts Contingent Valuation Method (CVM) on this survey responses. The results are as follows: first, as a result of analyzing the variables which affect willingness to pay for use-value, residence and age influence the willingness to pay significantly among socioeconomic characteristics. Next, the survey responses of Double-bounded dichotomous choices (DB-DC) CVM are converted into variables through statistic techniques. Furthermore, the variables are used for a Logit model to draw coefficients. The average willingness to pay per person for the use-value of Sejong Lake Park using the derived coefficients was approximately found to be 8,597 won. Therefore, as of 2019, Sejong Lake Park, with a total of 430,000 visitors, is estimated to have an annual economic value of 3.7 billion won. Third, the average Likert scale of the planning factor affecting the decision to pay for the economic value of Sejong Lake Park was the highest along the waterfront landscape, and the convenience facilities and waterfront landscape showed the highest willingness to pay, 10,000 won. In the range between 2,500 won and 5,000 won, the waterfront area ranks highest. Therefore, it can be said that visitors to Sejong Lake Park take account of the economic value of using the waterfront landscape the most. This study is meaningful as a thesis on use-value and the planning factors that affected value evaluation results of urban parks, and the analysis of the correlation between the planning factors of urban parks as hubs located in urban areas.

• Journal of the Korean Society of Radiology
• /
• v.15 no.4
• /
• pp.463-472
• /
• 2021

Demand for examinations using transvaginal transducer with high frequencies is increasing to observe pelvic organs in gynecological ultrasound tests. However, the quality control of the replacement probe in clinical trials is not properly implemented and the evaluation criteria have not been established. Therefore, 58 transvaginal transducers and 20 convex transducers were applied to the ATS-539 ultrasound phantom for 20 ultrasound devices currently in clinical use to obtain their respective images and measure them quantitatively and qualitatively. For quantitative measurements, vertical measurement, horizontal measurement, and focal zone and qualitative measurements, dead zone, axial·lateral resolution, sensitivity, functional resolution, gray scale·dynamic range were performed. Quantitative statistical analysis showed significant differences between the two transducers in the lateral measurement and local area (p<0.05). qualitative comparative analysis showed differences in sensitivity and functional resolution. This occurs due to the difference in frequency between transducers and the transducer's injection geometry. Based on the above experiments, the tolerance for horizontal measurement is raised to 10% (±8 mm), the tolerance for sensitivity is observed up to 6 cm deep, which is 12 cm deep,which is the level of the third quartile (75%). The permissible range of functional resolution is up to 6 (12 cm), 6 (12 cm), 11 (11 cm), 9 (9 cm), 6 (6 cm) target, which is the level of the third quartile (75%). It is considered reasonable to adjust the depth of targets in gray scale·dynamic range to measure at a depth of 2 cm, which is 50% of the depth of 4 cm. As above, the criteria for evaluating the quality of transvaginal transducer for use in the past have been proposed and it is expected that this study will be used as a basic data for the production of phantom exclusively for transvaginal transducer in the future.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.1
• /
• pp.147-156
• /
• 2022

The purpose of this study was to review various grounds and plans for the establishment of a convergence major in lifelong education for the disabled based on Daegu University, which establishes its status and identity as a base university for education and welfare for the disabled. Lifelong education for the disabled reflects the specificity of disability in common because it targets disabled learners, but since it constitutes two perspectives and characteristics of education and welfare, access to interdisciplinary convergence research in disabled-related fields is important. In the above dimension, Daegu University has an appropriate foundation to lead lifelong education for the disabled in Korea through various academic and practice-based infrastructures, and has sufficient leadership to improve the practical limitations of the lifelong education support system for the disabled. Accordingly, this study presented measures and related grounds to reflect lifelong education for the disabled in order to establish an interdisciplinary convergence major at Daegu University through literature review and expert advice. It was emphasized that lifelong education for the disabled, viewed as a new interdisciplinary convergence major, should be activated through professional competencies commonly accessible to the three fields rather than applied from a priority perspective between special education, rehabilitation science, and social welfare. As a result of the study, it was suggested that Korea, which failed to establish a lifelong education support system for the disabled, should gradually spread and spread to other universities starting with Daegu University's application model and plan. In addition, the necessity of systematically establishing a qualification development path for lifelong education professionals for the disabled through agreement between the three fields was also suggested.

• Korean Journal of Environment and Ecology
• /
• v.36 no.3
• /
• pp.327-337
• /
• 2022

Ecological restoration is considered a good means to prevent biodiversity loss in terms of the ecosystem's health and sustainability. However, there are difficulties in putting it into practice as there is no comprehensive and objective standard for the selection of plant species, such as environmental, ecological factors, and restoration goal setting. Therefore, this study developed an evaluation index necessary for selecting plant species for restoration using the Delphi method that synthesizes the opinions of the expert group. A survey with 38 questionnaires was conducted twice for experts in ecological restoration, etc., and the importance and priority of evaluation indicators were analyzed by dividing the restoration targets into inland and island regions. The result of the importance analysis showed that "native plants" had the highest average of 4.9 among the evaluation indices in both inland and island regions, followed by "seed security", "propagation", and "root growth rate". In the inland region, the index priority was analyzed in the order of "native plants", "appearance frequency", "root growth rate", "distribution range", and "seed security" in the island region, it was analyzed in the order of "native plants", "root growth rate", "appearance frequency", "distribution range", and "tolerance", showing slight differences between the two indicators. As a result of the importance and priority indicator analysis, we set the mean importance and priority of 4.1 and 2.9, respectively, in the inland region and 4.2 and 2.9, respectively, in the island region. As for the criteria of selecting plant species for ecological restoration, the "native plants" had the highest importance and priority. "Seed securing", 'viability", "topography", "proliferation", "tolerance", "soil conditions", "growth characteristics", "early succession", "distribution range", "appearance frequency", and "germination rate" were classified into subgroups of low importance and priority. The lowest indicators were "final stage of succession", "transition period", 'transition stage", "root", "reproduction", "soil", "appearance", "technology", "landscape", "climate", and "germination rate". We expected that the findings through objective verification in this study would be used as evaluation indicators for selecting native plant species for ecological restoration.

• KIPS Transactions on Software and Data Engineering
• /
• v.11 no.1
• /
• pp.41-50
• /
• 2022

In this paper, a method to directly calculate the major elements of skin color such as melanin and hemoglobin from the RGB signal of the camera is proposed. The main elements of skin color typically measure spectral reflectance using specific equipment, and reconfigure the values at some wavelengths of the measured light. The values calculated by this method include such things as melanin index and erythema index, and require special equipment such as a spectral reflectance measuring device or a multi-spectral camera. It is difficult to find a direct calculation method for such component elements from a general digital camera, and a method of indirectly calculating the concentration of melanin and hemoglobin using independent component analysis has been proposed. This method targets a region of a certain RGB image, extracts characteristic vectors of melanin and hemoglobin, and calculates the concentration in a manner similar to that of Principal Component Analysis. The disadvantage of this method is that it is difficult to directly calculate the pixel unit because a group of pixels in a certain area is used as an input, and since the extracted feature vector is implemented by an optimization method, it tends to be calculated with a different value each time it is executed. The final calculation is determined in the form of an image representing the components of melanin and hemoglobin by converting it back to the RGB coordinate system without using the feature vector itself. In order to improve the disadvantages of this method, the proposed method is to calculate the component values of melanin and hemoglobin in a feature space rather than an RGB coordinate system using a feature vector, and calculate the spectral reflectance corresponding to the skin color using a general digital camera. Methods and methods of calculating detailed components constituting skin pigments such as melanin, oxidized hemoglobin, deoxidized hemoglobin, and carotenoid using spectral reflectance. The proposed method does not require special equipment such as a spectral reflectance measuring device or a multi-spectral camera, and unlike the existing method, direct calculation of the pixel unit is possible, and the same characteristics can be obtained even in repeated execution. The standard diviation of density for melanin and hemoglobin of proposed method was 15% compared to conventional and therefore gives 6 times stable.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.67 no.2
• /
• pp.111-120
• /
• 2022

Improving flour quality is one of the major targets of wheat breeding programs. This study determined the optimum high-molecular-weight glutenin subunits (HMW-GS) to improve flour quality, and analyzed the correlation between agronomic and quality traits in Korea. A total of 180 wheat varieties, including 55 Korean and 125 foreign cultivars, carrying various Glu-1 alleles, were evaluated for their quality and agronomic traits. Results indicated that Glu-A1b, Glu-B1b, and Glu-D1f were the most prevailing alleles for each Glu-1 locus for Korean wheat cultivars. Korean wheat cultivars recorded shorter days to heading (DTH) and longer days to maturity (DTM) compared to foreign cultivars. In addition, an interaction effect was found between Glu-A1 and Glu-B1 alleles on several quality parameters. The combination of Glu-A1c and Glu-B1i showed a higher protein content, dry gluten content, and higher sodium dodecyl sulfate (SDS) sedimentation value than other Glu-A1×Glu-B1 combinations. Cultivars carrying Glu-A1a or Glu-A1b, Glu-B1i or Glu-B1al, and Glu-D1d for each Glu-1 locus exhibited a longer mixing time and stronger mixing tolerance. The DTM positively correlated with the protein content, gluten index and SDS sedimentation value. However, a negative correlation was observed between DTH and quality traits. Owing to the above results, this study suggests that an increase in the frequency of Glu-B1i or Glu-B1al, Glu-D1d coupled with a short DTH and long DTM could significantly improve wheat quality properties.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.3
• /
• pp.191-200
• /
• 2020

Companies are seeking to maximize profits through exports and imports in the ultra-fast, ultra-high-speed modern society. It is only possible to sustain its survival if it targets the global market, not based on any specific region. The K-POP group is also targeting overseas markets in a manner similar to the various global strategies used when companies make inroads into foreign markets, including exports, contracts and direct investment. The K-POP group is engaged in various forms of activities, ranging from simple forms of performance (export) that are visited and staged by an invitation from a certain foreign country to series performances (license) by an invitation from a local promoter and tour performances using its capabilities. The K-POP group is seeking to go beyond the art of single-stage performances and make a systematic plan and make inroads into foreign countries in the form of direct investment suitable for each foreign country. The K-POP group made inroads into overseas markets in the form of simple performances from the late 1990s to 2005, when 'Korean Wave' was first introduced. Group H.O.T., etc. are typical examples. Since then, it has sought to enter overseas markets in the form of franchises by accepting overseas members by 2018, starting with Super Junior in 2005. Since then, the K-POP group in the form of joint investment attempted as group IZ*ONE in 2018 appeared, and a voice story came out in September 2018 when South Korea's JYP Entertainment and Tencent of China joined forces. Unlike K-POP Group, which has entered foreign markets with a global strategy based on the existing export method (H.O.T.), 'Boystory' is a representative group that is made with joint investment, which is a direct investment method. In February 2020, RBW released 'D1Verse,' a five-member group selected by Vietnam's reality show, as a joint investment-type group. This shows the possibility that domestic and foreign companies will release a group in the form of joint investment in order to pursue both globalization and localization.

• KIPS Transactions on Computer and Communication Systems
• /
• v.10 no.8
• /
• pp.223-230
• /
• 2021

The lightweight block cipher PIPO announced at ICISC'20 has been effectively implemented by applying the bit slice technique. In this paper, we propose a parallel optimal implementation of PIPO for ARM processors. The proposed implementation enables parallel encryption of 8-plaintexts and 16-plaintexts. The implementation targets the A10x fusion processor. On the target processor, the existing reference PIPO code has performance of 34.6 cpb and 44.7 cpb in 64/128 and 64/256 standards. Among the proposed methods, the general implementation has a performance of 12.0 cpb and 15.6 cpb in the 8-plaintexts 64/128 and 64/256 standards, and 6.3 cpb and 8.1 cpb in the 16-plaintexts 64/128 and 64/256 standards. Compared to the existing reference code implementation, the 8-plaintexts parallel implementation for each standard has about 65.3%, 66.4%, and the 16-plaintexts parallel implementation, about 81.8%, and 82.1% better performance. The register minimum alignment implementation shows performance of 8.2 cpb and 10.2 cpb in the 8-plaintexts 64/128 and 64/256 specifications, and 3.9 cpb and 4.8 cpb in the 16-plaintexts 64/128 and 64/256 specifications. Compared to the existing reference code implementation, the 8-plaintexts parallel implementation has improved performance by about 76.3% and 77.2%, and the 16-plaintext parallel implementation is about 88.7% and 89.3% higher for each standard.