• Journal of the Korean Data and Information Science Society
• /
• v.14 no.2
• /
• pp.237-245
• /
• 2003

MDS(multi-dimensional scaling) for preference data is a graphical tool which usually figures out how consumers recognize, evaluate certain products. This article is mainly concerned with an optimal scaling for MDS when target configuration is available. Rotation of axis and SUR(seemingly unrelated regression) methods are employed to get a new configuration which is obtained as close to the target as we can. Methodologies developed here are also illustrated via a real data set.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.3C no.1
• /
• pp.23-27
• /
• 2003

Structural properties of Cu-Ni alloy films, such as preferred orientation, crystallite size, in-ter-planar spacing, cross-sectional morphology, and electrical resistivity, are investigated in terms of tar-get configurations that are used in the film deposition by means of magnetron co-sputtering. Two different target configurations are considered in this study: a dual-type configuration in which two separate tar-gets (Cu and Ni) and different bias types (RF and DC) are used and a Ni-on-Cu type configuration in which Ni chips are attached to a Cu target. The dual-type configuration appears to have some advantages over the Ni-on-Cu type regarding the accurate control of atomic composition of the deposited Cu-Ni alloy. However, the dual-type-produced film exhibits a porous and columnar structure, the relatively large internal stress, and the high electrical resistivity, which are mainly due to the relatively low mobility of adatoms. The affects of thermal treatment and deposition conditions on the structural and electrical properties of dual-type Cu-Ni films are also discussed.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.20 no.3
• /
• pp.35-43
• /
• 2012

Medium size rotorcraft consist of approximately 5,000 key components. The components must satisfy the target weight and performance requirement through optimization. Therefore a rotorcraft component has approximately 100 times higher unit cost for mass production than the equivalent of an automobile's, along with huge development cost. Configuration management consists of four main parts : configuration identification, configuration control, configuration audit, and data management. In development programme, configuration management is one of the methods to save development cost, and setting a well-structured configuration management system according to the Military Standard is an important factor in success of the programme. The paper proposes a configuration management system suitable for development of various multi-use components development and presents that the configuration management was performed successfully during dual-use component development programme using the established system.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.27 no.4
• /
• pp.59-64
• /
• 1999

This study is about gaining orientation through anchorage act of a group of ferryman. In addition, a point acquisition and character of landmark that is closely realated to a point acquisition would be clarified by studying the form of configuration of the earth and object which is used landmark for anchorage. There are 13 anchorage points in the north part of Pusan harbor. 12 anchorage points are used to anchor. A ferryman let a ship which is temporarily anchoring move safely and speedily at the anchorage point. At that time, he uses landmarks by a technique of Overlay View. Between landmarks and viewer would be formed exquisite location combination. A mountain peak, a peak of island, nature configuration of land such as intermitent rock and location, size and form of buildings or structures of a city were variously appeared as landscape elements which were used landmarks. Looking at conditions to be easily captured as a target object, 1. A particular point of a mountain ridge line which was not shield by buildings. 2. In case objects have similar form, the building which was located in the front or the highest. 3. In case of a singular object, whatever there is physical elements, that would be a target object. Through this study a configuration of the ground such as a mountain peak which is become the background of harbor landscape is very important element to find anchorage point in configuration of the ground and object. So, the continuous preservation of the contour line of mountain is needed to do safe and effective anchorage act.

• Journal of the Korea Society for Simulation
• /
• v.29 no.2
• /
• pp.21-33
• /
• 2020

This study develops a simulator for determining the sonar sensor configuration of unmanned underwater vehicles (UUVs) based on a scenario, in order for UUVs to conduct an effective anti-submarine warfare (ASW). First, we analyze the missions and operational concepts of UUVs in the field of ASW, and then select a Hold-at-Risk scenario as the one with the highest priority. Next, for modeling the components of a simulator, the motion, acoustic characteristic, and environment condition of the platforms (UUV and target submarine) are specified. Especially, based on the beam pattern of each sonar configuration considered in this paper, the passive sonar equation is used to verify target detection, and we further estimate the azimuth and elevation of the target using amplitude and phase of the received signal, respectively. The simulation results show the performance tendency depending on the sonar sensor configurations of a UUV, and the simulator provides a high applicability under various scenarios.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.12
• /
• pp.6139-6160
• /
• 2018

For ease of use and access, web browsers are now being used to access and modify sensitive data and systems including critical control systems. Due to their computational capabilities and network connectivity, browsers are vulnerable to several types of attacks, even when fully updated. Browsers are also the main target of phishing attacks. Many browser attacks, including phishing, could be prevented or mitigated by using site-, user-, and device-specific security configurations. However, we discovered that all major browsers expose disparate security configuration procedures, option names, values, and semantics. This results in an extremely hard to secure web browsing ecosystem. We analyzed more than a 1000 browser security configuration options in three major browsers and found that only 13 configuration options had syntactic and semantic similarity, while 4 configuration options had semantic similarity, but not syntactic similarity. We: a) describe the results of our in-depth analysis of browser security configuration options; b) demonstrate the complexity of policy-based configuration of web browsers; c) describe a knowledge-based solution that would enable organizations to implement highly-granular and policy-level secure configurations for their information and operational technology browsing infrastructures at the enterprise scale; and d) argue for necessity of developing a common language and semantics for web browser configurations.

• Journal of Chest Surgery
• /
• v.54 no.2
• /
• pp.117-126
• /
• 2021

Background: Several factors, such as the degree of target vessel stenosis, are known to be associated with radial artery (RA) graft patency in coronary artery bypass grafting (CABG). There is a lack of data regarding the effect of the RA proximal configuration (aortic anastomosis versus T-anastomosis). This study evaluated the effects of the RA proximal configuration on the patency rate and clinical outcomes after CABG. Methods: We conducted a retrospective study, analyzing 328 patients who had undergone CABG with an RA graft. We divided the patients into 2 groups. The primary endpoint was RA patency and the secondary endpoints were overall mortality and major adverse cardiac and cerebrovascular events (MACCE). We performed a propensity score-matched comparison. Results: Aorta-RA anastomosis was performed in 275 patients, whereas the rest of the 53 patients received T-RA anastomosis. The mean age was 67.3±8.7 years in the T-RA anastomosis group and 63.8±9.5 years in the aorta-RA anastomosis group (p=0.02). The mean follow-up duration was 5.13±3.07 years. Target vessel stenosis ≥70% (hazard ratio [HR], 0.42; 95% confidence interval [CI], 0.20-0.91; p=0.03) and T-RA anastomosis configuration (HR, 2.34; 95% CI, 1.01-5.19; p=0.04) were significantly associated with RA occlusion in the multivariable analysis. However, T-RA anastomosis was not associated with higher risks of overall mortality and MACCE following CABG (p=0.30 and p=0.07 in the matched group, respectively). Conclusion: Aorta-RA anastomosis showed a superior patency rate compared to T-RA anastomosis. However, the RA proximal anastomosis configuration was not associated with mortality or MACCE.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.10
• /
• pp.966-980
• /
• 2011

Radar receiving echo signal provides target information - range, velocity and position by signal magnitude and Doppler shift, which are determined by target reflection characteristics and target maneuver. Target angle error is extracted from the magnitude ratio of difference channel to sum channel. In this paper, we introduce a radar Return Signal Simulation Equipment(RSSE) which is implemented for the purpose of performance analysis and evaluation of phased array multi-function radar(MFR). It generates multi-target environment with jamming signals using MC-DDS (Multi-Channel Direct Digital Synthesis), and has scalability by using the efficient hardware configuration. The performance of the developed RSSE has been evaluated under various test environments. Especially, we proved that required target detection performance is achieved by RSP(Radar Signal Processor) interfaced RSSE configuration.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.1
• /
• pp.59-66
• /
• 2000

In a previous paper, we have examined the effects of nozzle configuration and jet to jet spacing on the heat transfer of 1 row of circular water jets. In this paper, experiments have been conducted to obtain the effects of nozzle to target plate distances on the heat transfer of 1 row of 3 jets and 1 row of 5 jets. The nozzle configurations are Cone type, Reverse cone type and Vertical circular type. Nozzle to target plate distance H was varied from 16 mm(H/D=2) to 80mm(H/D=10). For fixed value of mass flow rate and nozzle to target plate distance, larger values of average Nusselt number were obtained for the smaller jet to jet spacing. For the array of water jets, the average heat transfer was decreased slightly with increasing nozzle to target plate distance at low jet velocity of $\textrm{V}_{o}$=3 m/s. However, except for $\textrm{V}_{o}$=8 m/s of 1 row of 5 jets, it was increased with increasing nozzle to target plate distance at high jet velocity of $\textrm{V}_{o}$$\geq$6m/s. We proposed to apply the nozzle configuration of maximum average heat transfer to each nozzle to target plate distance for 1 row of 3 jets, and, it was Reverse cone type nozzle for 1 row of 5 jets(Reynolds number$\geq$36000).

• Journal of the Korean institute of surface engineering
• /
• v.41 no.5
• /
• pp.205-213
• /
• 2008

A 3D particle code is developed to analyze electron behavior in a planar magnetron sputtering cathode either in balanced or unbalanced configuration. Three types of collisions are included; electron - neutral elastic, excitation to a metastable state and ionization. Flight path is calculated by a 4-th order Runge-Kutta method with a time step of 10 ps. Effects of electron starting position, magnetic field intensity and configuration were analyzed. For a more efficient and accurate modeling, multithreading technique is considered for multicore CPU computers. Under an assumption of cold ion approach, target erosion profiles are predicted for a flat target surface.