• 제목/요약/키워드: Target board

검색결과 287건 처리시간 0.031초

밀리미터파 대역 차량용 레이더를 위한 순서통계 기법을 이용한 다중표적의 데이터 연관 필터 (Multi-target Data Association Filter Based on Order Statistics for Millimeter-wave Automotive Radar)

  • 이문식;김용훈
    • 대한전자공학회논문지SP
    • /
    • 제37권5호
    • /
    • pp.94-104
    • /
    • 2000
  • 차량 충돌 경보용 레이더 시스템의 개발에 있어 표적 추적의 정확도와 신뢰도는 매우 중요한 요소이다. 여러 표적을 동시에 추적할 때 중요한 것은 표적과 측정치와의 데이터 연관(data association) 이며, 부적절한 측정치가 어느 표적과 연관되면 그 표적은 트랙을 벗어나 추적능력을 잃어버릴 수 있고 심지어 다른 표적의 추적에도 영향을 줄 수 있다 지금까지 발표된 대부분의 데이터 연관 필터들은 근접하여 이동하는 표적들의 경우 이와 같은 문제점을 보여왔다 따라서, 현재 개발되고 있는 많은 알고리즘들은 이러한 데이터 연 관 문제의 해결에 초점을 맞추고 있다 본 논문에서는 순서통계(order statistics)를 이용한 새로운 다중 표적의 데이터 연관 방법에 대하여 서술하고자 한다 OSPDA와 OSJPDA로 불리는 제안된 방법은 각각 PDA 필터 또는 JPDA 필터에서 계산된 연관 확률을 이용하며 이 연관 확률을 결정 논리(dicision logic)에 의한 가중치로 함수화 하여 표적과 측정치 사이에 최적 혹은 최적 근처의(near optimal) 데이터 연관이 가능하도록 한 것이다 시뮬레이션 결과를 통해, 제안한 방법은 기존의 NN 필터, PDA 필터, 그리고 JPDA 필터의 성능과 비교 분석되었으며, 그 결과 제안한 OSPDA, OSJPDA 필터는 PDA, JPDA 필터보다 추적 정확도에 대해 각각 약 18%, 19% 이상으로 성능이 향상됨을 확인하였다 제안한 방법은 CAN을 통해 차량 엔진 등의 ECU와 통신하도록 개발된 DSP 보드를 이용하여 구현되었다

  • PDF

국내 전철 및 가전제품을 대상으로 한 전자장 수준 실태조사 (A survey on the EMF Levels of Study and Electric Appliances in Korea)

  • 장성기;조용성;이석조;유승화;정경미;임준호
    • 한국산업보건학회지
    • /
    • 제15권1호
    • /
    • pp.71-81
    • /
    • 2005
  • The purposes of this study was to collect, analyze, and describe the MF exposure levels from subways in Korea and to measure and evaluate the MF levels generated from electric appliances used at general homes. The target subway lines were Seoul Metropolitan Line 1 to Line 8, Bundang Line, Incheon Line, Daegu Line, Gwangju Line, and Busan Line 1 and Line 2. We measured at each station in those subway lines and, all the train types (pantograph-equipped, motor-equipped, and common), and platform types(facing and isolating) were investigated by the distance(80, 200, 400 cm) from the train on 19 targeted subway lines using 3 magnetic field measuring devices (EMDEXII, Enertech Co.) during the survey from January till October, 2004. On the other hand, the levels of the 60Hz magnetic fields generated from 14 items of home electric appliances such as electric blankets, hair dryers, electric razors, etc. were measured at 10 general homes using 5 EMDEXII meters with a sampling interval of 1.5 second by the distance(surface, 30, 50, 100, 300cm ) from the target electric appliances. The survey results in the whole subway lines examined in this study were as follows; Seoul Metropolitan Line 4 using AC(alternating current) power source showed the highest mean value of $2.85{\mu}T$, followed by Seoul Metropolitan Line 1 running between Seoul and Incheon using AC($2.78{\mu}T$), Seoul Metropolitan Line 1 between Seoul and Uijongbu using AC($2.73{\mu}T$), Bundang Line using AC($1.79{\mu}T$), Seoul Metropolitan Line 1 connected from Yongsan using AC($1.67{\mu}T$), Seoul Metropolitan Line 1 between Seoul and Suwon using AC($0.79{\mu}T$), and so on. In general, the intensity of the magnetic field in the subway systems in Korea was significantly higher when using AC($2.14{\pm}0.91{\mu}T$) than when using DC($0.29{\pm}0.44{\mu}T$) power source. Among the home electric appliances examined, microwave ovens showed the highest mean value of $7.69{\mu}T$, followed by hair dryers($6.47{\mu}T$), vacuum cleaners($5.27{\mu}T$), televisions ($2.26{\mu}T$), electric blankets($1.38{\mu}T$), personal computers ($0.81{\mu}T$), and so on. Two items of electric appliances showed the excess value of $0.2{\mu}T$ at the distance of 30cm in the MF exposure level; electric razors $1.58{\pm}2.13{\mu}T$ and vacuum cleaners $0.48{\pm}0.44{\mu}T$. As a whole, this study showed a tendency that the shift of the MF levels according to the increase of distance from the electric appliances was lower than those of the results surveyed in UK and USA. As a result, this study is expected to suggest meaningful data for the future study in exposure assessment of magnetic fields and for the establishment of guidelines for subways and electric appliances in Korea. More detailed and large scaled exposure assessment studies should be performed continuously to get the various and useful information on health risk assessment of MFs in Korea.

선박 자동접안을 위한 정박지 목표물의 실시간 검출법 (Real-time Detection Technique of the Target in a Berth for Automatic Ship Berthing)

  • 최용운;;김영복;이권순
    • 제어로봇시스템학회논문지
    • /
    • 제12권5호
    • /
    • pp.431-437
    • /
    • 2006
  • In this paper vector code correlation(VCC) method and an algorithm to promote the image-processing performance in building an effective measurement system using cameras are described far automatically berthing and controlling the ship equipped with side-thrusters. In order to realize automatic ship berthing, it is indispensable that the berthing assistant system on the ship should continuously trace a target in the berth to measure the distance to the target and the ship attitude, such that we can make the ship move to the specified location. The considered system is made up of 4 apparatuses compounded from a CCD camera, a camera direction controller, a popular PC with a built-in image processing board and a signal conversion unit connected to parallel port of the PC. The object of this paper is to reduce the image-processing time so that the berthing system is able to ensure the safety schedule against risks during approaching to the berth. It could be achieved by composing the vector code image to utilize the gradient of an approximated plane found with the brightness of pixels forming a certain region in an image and verifying the effectiveness on a commonly used PC. From experimental results, it is clear that the proposed method can be applied to the measurement system for automatic ship berthing and has the image-processing time of fourfold as compared with the typical template matching method.

저가형 무인항공기 운용을 위한 항법시스템 설계 (Design of Navigation System for Low Cost Unmanned Aerial Vehicle)

  • 이장호;김성필;박무혁;안이기
    • 한국항행학회논문지
    • /
    • 제8권2호
    • /
    • pp.105-111
    • /
    • 2004
  • 최근의 무인항공기는 정찰임무를 비롯하여 무인기에 미사일을 장착하여 지대공 공격 임무를 수행하기까지 군용으로 뿐만 아니라 기상 관측, 해상 관측 등의 목적으로 폭넓게 활용하고 있으며, 점차 필요성이 높아지고 있다. 이러한 무인기는 정밀한 자세제어를 위하여 자세정보를 제공하는 AHRS와 같은 센서를 장착하는데 비용이 500만원 정도에서 고급 센서는 수 천 만원에 이르고 있다. 최근 한국항공우주연구원에서는 이러한 고가의 센서 출력정보인 자세각 정보를 사용하지 않고 각속도 정보를 기반으로 저가형 자동비행시스템을 개발하여 소형표적기와 무인표적기 비행시험을 통하여 성능을 입증하였다. 본 논문에서는 무인항공기의 항법시스템 설계를 위하여 목표로 하는 신뢰성을 충족시키면 동시에 저가형인 GPS 센서를 선택하기 위하여 Hardware in the Loop Simulation(HILS)을 통하여 GPS 출력주파수에 따른 성능을 확인하였다. 마지막으로 무인표적기에 자동비행시스템과 항법시스템을 장착하여 비행시험을 수행하였으며, 설계된 항법시스템 성능을 비행시험 결과를 통하여 확인하였다.

  • PDF

소형 밀리미터파 추적 레이다용 고속 실시간 신호처리기 개발 (Development of High-Speed Real-Time Signal Processing Unit for Small Millimeter-wave Tracking Radar)

  • 김홍락;박승욱;우선걸;김윤진
    • 한국인터넷방송통신학회논문지
    • /
    • 제19권1호
    • /
    • pp.9-14
    • /
    • 2019
  • 소형 밀리미터파 추적 레이다는 저속으로 기동 중인 큰 RCS를 갖는 바다위의 함정 표적에 대하여 TWS(Track While Scan) 방식을 통하여 실시간으로 표적을 탐색, 탐지 하여 추적하는 펄스 방식의 레이더이다. 본 논문에서는 저속으로 기동을 하지만 채프, 디코이 등 다양한 기만체를 운영하는 함정 표적에 대하여 LPRF와 DBS, 및 HRR 신호처리 기법을 통하여 표적 정보를 획득하고 추적하기 위하여 고속의 CPU가 탑재된 보드 개발과 표적정보를 실시간 처리하기 위하여 FPGA(Field Programmable Gate Array)를 활용하여 실시간 FFT 연산이 가능한 DFT(Discrete Fourier Transform) 모듈 설계를 포함한 신호처리기 구조를 설계하고 성능시험을 통해 구현한 신호처리기를 검증하였다.

Adaptive Input Traffic Prediction Scheme for Absolute and Proportional Delay Differentiated Services in Broadband Convergence Network

  • Paik, Jung-Hoon;Ryoo, Jeong-Dong;Joo, Bheom-Soon
    • ETRI Journal
    • /
    • 제30권2호
    • /
    • pp.227-237
    • /
    • 2008
  • In this paper, an algorithm that provides absolute and proportional differentiation of packet delays is proposed with the objective of enhancing quality of service in future packet networks. It features an adaptive scheme that adjusts the target delay for every time slot to compensate the deviation from the target delay, which is caused by prediction error on the traffic to arrive at the next time slot. It predicts the traffic to arrive at the beginning of a time slot and measures the actual arrived traffic at the end of the time slot. The difference between them is utilized by the delay control operation for the next time slot to offset it. Because the proposed algorithm compensates the prediction error continuously, it shows superior adaptability to bursty traffic and exponential traffic. Through simulations we demonstrate that the algorithm meets the quantitative delay bounds and is robust to traffic fluctuation in comparison with the conventional non-adaptive mechanism. The algorithm is implemented with VHDL on a Xilinx Spartan XC3S1500 FPGA, and the performance is verified under the test board based on the XPC860P CPU.

  • PDF

저궤도위성 탑재소프트웨어 시험환경에 대한 연구 (A Study of the flight s/w test environment for the LEO satellite)

  • 채동석;이재승;최종욱;양승은;이종인
    • 항공우주기술
    • /
    • 제6권2호
    • /
    • pp.45-51
    • /
    • 2007
  • 요구분석 및 설계 단계를 거쳐 구현된 탑재소프트웨어는 오류를 제거하고 요구규격에 맞도록 모든 기능이 정확히 구현되었는지 확인하기 위한 여러 가지 시험절차를 거치게 되는데, 일반적으로 단위시험, 통합시험, 검증시험 순으로 진행된다. 단위시험은 보통 개인 PC 환경에서 타겟 시뮬레이터를 이용하여 수행되고, 통합 및 검증시험은 목표시스템과 유사한 조건에서 수행할 수 있도록 하드웨어 환경을 제공하는 소프트웨어 검증장치를 이용하여 수행된다. 본 논문에서는 차세대 저궤도위성 탑재소프트웨어 시험환경에 대한 것으로 시험절차와 시험도구, 탑재소프트웨어 검증장치에 대하여 기술한다.

  • PDF

다수의 건설인력 위치 추적을 위한 스테레오 비전의 활용 (Simultaneous Tracking of Multiple Construction Workers Using Stereo-Vision)

  • 이용주;박만우
    • 한국BIM학회 논문집
    • /
    • 제7권1호
    • /
    • pp.45-53
    • /
    • 2017
  • Continuous research efforts have been made on acquiring location data on construction sites. As a result, GPS and RFID are increasingly employed on the site to track the location of equipment and materials. However, these systems are based on radio frequency technologies which require attaching tags on every target entity. Implementing the systems incurs time and costs for attaching/detaching/managing the tags or sensors. For this reason, efforts are currently being made to track construction entities using only cameras. Vision-based 3D tracking has been presented in a previous research work in which the location of construction manpower, vehicle, and materials were successfully tracked. However, the proposed system is still in its infancy and yet to be implemented on practical applications for two reasons. First, it does not involve entity matching across two views, and thus cannot be used for tracking multiple entities, simultaneously. Second, the use of a checker board in the camera calibration process entails a focus-related problem when the baseline is long and the target entities are located far from the cameras. This paper proposes a vision-based method to track multiple workers simultaneously. An entity matching procedure is added to acquire the matching pairs of the same entities across two views which is necessary for tracking multiple entities. Also, the proposed method simplified the calibration process by avoiding the use of a checkerboard, making it more adequate to the realistic deployment on construction sites.

이동물체 추적 가능한 이동형 로봇구동 시스템 설계 및 센서 구현 (Robot Driving System and Sensors Implementation for a Mobile Robot Capable of Tracking a Moving Target)

  • 명호준;김동환
    • 한국생산제조학회지
    • /
    • 제22권3_1spc호
    • /
    • pp.607-614
    • /
    • 2013
  • This paper proposes a robot driving system and sensor implementation for use with an education robot. This robot has multiple functions and was designed so that children could use it with interest and ease. The robot recognizes the location of a user and follows that user at a specific distance when the robot and user communicate with each other. In this work, the robot was designed and manufactured to evaluate its performance. In addition, an embedded board was installed with the purpose of communicating with a smart phone, and a camera mounted on the robot allowed it to monitor the environment. To allow the robot to follow a moving user, a set of sensors combined with an RF module and ultrasonic sensors were adopted to measure the distance between the user and the robot. With the help of this ultrasonic sensors arrangement, the location of the user couldbe identified in all directions, which allowed the robot to follow the moving user at the desired distance. Experiments were carried out to see how well the user's location could be recognized and to investigate how accurately the robot trackedthe user, which eventually yielded a satisfactory performance.

Study on Application of Real Time AIS Information

  • Hori, Akihiko;Arai, Yasuo;Okuda, Shigeyuki
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2006년도 Asia Navigation Conference
    • /
    • pp.63-70
    • /
    • 2006
  • Now AIS (Automatic Identification System) has been under full operation for ocean-going vessels, and it is expected not only to identify target ships but also to take collision avoidance using AIS information with Radar and ARFA information in restricted waters. AIS information is very useful not only for target identifications but also for taking collision avoidance, but OOW (Officer OF Watch-keeping) should take care of systematic observation of AIS because of miss-operation or malfunction of AIS. In this paper, we propose the application of Onboard Ship Handling Simulator with visual system displayed 3D scene added AIS performance such as blind areas of Island, microwave propagation, ok. and maneuvering simulation using TK models, applied real time AIS information and research the effectiveness of this system for ship handling in restricted waters, and discus the principal issues through the on board experiments. Conclusion will be expected that; 1) systematic observation of ASS information using visual scene simulator with AIS information will be effectively done, 2) observation compared with Radar and ARPA information will be also useful to make a systematic observation, 3) using the recording and replay function of simulation will be useful not only for systematic observation but also to measure and to encourage officers' skill.

  • PDF