• Journal of Korean Society on Water Environment
• /
• v.27 no.5
• /
• pp.634-645
• /
• 2011

A newly developed rainwater harvesting (RWH) system reliability model is evaluated for roof area of buildings in Haeundae District of Busan. RWH system is used to supply water for toilet flushing, back garden irrigation, and air cooling. This model is portable because it is based on a non-parametric precipitation generation algorithm using a markov chain. Precipitation occurrence is simulated using transition probabilities derived for each day of the year based on the historical probability of wet and dry day state changes. Precipitation amounts are selected from a matrix of historical values within a moving 30 day window that is centered on the target day. Then, the reliability of RWH system is determined for catchment area and tank volume ranges using synthetic precipitation data. As a result, the synthetic rainfall data well reproduced the characteristics of precipitation in Busan. Also the reliabilities of RWH system for each of demands were computed to high values. Furthermore, for study area using the RWH system, reduction efficiencies for rooftop runoff inputs to the sewer system and potable water demand are evaluated for 23%, 53%, respectively.

• Biomaterials Research
• /
• v.22 no.4
• /
• pp.290-302
• /
• 2018

Background: The main purpose of drug delivery systems is to deliver the drugs at the appropriate concentration to the precise target site. Recently, the application of a thin film in the field of drug delivery has gained increasing interest because of its ability to safely load drugs and to release the drug in a controlled manner, which improves drug efficacy. Drug loading by the thin film can be done in various ways, depending on type of the drug, the area of exposure, and the purpose of drug delivery. Main text: This review summarizes the various methods used for preparing thin films with drugs via Layer-by-layer (LbL) assembly. Furthermore, additional functionalities of thin films using surface modification in drug delivery are briefly discussed. There are three types of methods for preparing a drug-carrying multilayered film using LbL assembly. First methods include approaches for direct loading of the drug into the pre-fabricated multilayer film. Second methods are preparing thin films using drugs as building blocks. Thirdly, the drugs are incorporated in the cargo so that the cargo itself can be used as the materials of the film. Conclusion: The appropriate designs of the drug-loaded film were produced in consideration of the release amounts and site of the desired drug. Furthermore, additional surface modification using the LbL technique enabled the preparation of effective drug delivery carriers with improved targeting effect. Therefore, the multilayer thin films fabricated by the LbL technique are a promising candidate for an ideal drug delivery system and the development possibilities of this technology are infinite.

• Fisheries and Aquatic Sciences
• /
• v.24 no.11
• /
• pp.383-389
• /
• 2021

On the southern coast of South Korea, dark-banded rockfish, sea bass, and red seabream are caught by single-line fishing. In particular, red seabream and sea bass are caught in the Jeollanam-do region using gear with attached fishing hooks, such as longline and single-line gear, with live shrimp as bait. The objective of this study was to compare the catch efficiency of two types of live shrimp (naturally grown Shiba shrimp [Metapenaeus joyneri] and cultured whiteleg shrimp [Litopenaeus vannamei]) used as bait. The investigation included interviews, on-board surveys, and water tank experiments. Interviews were conducted with relevant parties to determine the preference for live shrimp as bait, and the results showed a greater preference for cultured whiteleg shrimp. Further, an on-board survey was conducted to compare catch efficiency between these two types of live shrimp bait for single-line fishing. The on-board investigations were conducted once or twice a month between June and October. In total, the amounts of fish caught using naturally grown Shiba shrimp and cultured whiteleg shrimp were 56 and 52, respectively. Of these, the numbers of sea bass, the primary target fish species, caught using naturally grown Shiba shrimp and cultured whiteleg shrimp were 43 and 40, respectively. Thus, the results showed that there was almost no difference in the number of fish caught based on the bait used. However, according to a water tank experiment, cultured whiteleg shrimp survived longer than naturally grown Shiba shrimp.

• The Research Journal of the Costume Culture
• /
• v.30 no.6
• /
• pp.828-841
• /
• 2022

This study aims to develop a fitted torso pattern suitable for males in their forties and fifties who are obese-a group that accounts for more than fifty percent of men in this age group-using a 3D virtual fitting program. Size Korea's 2022 data for obese males in their forties and fifties is utilized for this study. In terms of the research method, a 3D program (CLO 3D) is used to implement the target group's various body types and to apply fitted torsos that enable verification and evaluation of the pattern's fit and ease. The characteristics of fitted torso patterns for obese bodies are as follows: the front centerline is a profile line; shoulder darts are added by reflecting waist-abdominal protrusion in the front panel; and shoulder, arm, waist, and center-back darts are constructed for the back panel. For obese bodies, the minimum circumference ease amounts should be approximately 6-7cm for the chest, 6cm for the waist, and 6-7cm for the hips. Based on an evaluation of the virtual fit of the developed fitted torso pattern, the data shows that a pattern (foundation) such as this is well suited for obese body types with an average of 4.67/5 points for reverse triangular obesity, an average of 6.67/7 points for log obesity, and an average of 6.69 points for the ease amount.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.3 no.2
• /
• pp.25-36
• /
• 1995

It is important to separate the compostables from waste for successful operation of composting plant, since various compositions are mixed in it. For the separation of compostables, it is necessary to estimate total amounts of compostables from several sources. Based on it, required capacity and number of composting plant as well as proper waste collection and transportation system can be determined. So, amounts of garbage, major target material for composting. were estimated in this study. In survey of unit garbage generation(UGG). different estimation results would be obtained depending on the basis of its measurement. However, previous researches did not consider it. In this paper, the correlations between area and the number of user of garbage source were analyzed to find the related equations which were apllyed to estimation of total generation. Obtained results are as the following. Relative variations of measured UGG based on area and custumer are 62.5 and 52.8, respectively. In linear regression, related equation between area and custumer was Y=0.244X+59.0 (X=area, Y=custumer). The correlation factor r is 0.904. Equation Y=616.5X/(X+1215.4) was also obtained from linear regression using Monod equation (r=0.720). From the first order equation and measured data of UGG based on custumer, amounts of garbage generation from restaurant in Seoul and the whole country were calculated to 2043.9 ton/d and 9014.0 ton/d, respectively. But, the values calculated from measured data of UGG based on area were as low as 821.3 ton/d Cin Seoul) and 3821.0 ton/d(in the whole country). Consequently, the measurement of unit garbage generation based on the number of custumer was more favorable to lessen the points of survey and to guarantee the representative values. Especially, it would fit well on restaurant having statistics of area.

• Korean Journal of Environmental Agriculture
• /
• v.36 no.4
• /
• pp.279-287
• /
• 2017

BACKGROUND: Many farmers who cultivate the strawberries for export have used agricultural chemicals which MRL (Maximum Residue Limits) of main export target countries or simultaneous multi-residue analysis in Korea have not been established. Among them, the cyenopyrafen and cyflumetofen were selected and applied to this study to determine the PHI (pre-harvest interval) which is appropriate to the PLS (Positive List System) criterion (0.01 mg/kg) and to investigate the residual amounts in the samples. In addition, Fifty pesticides were monitored to check up whether it is suitable or not for main export target countries. METHODS AND RESULTS: Cyenopyrafen and cyflumetofen were spayed out to the strawberries. Samples for residual analyses were taken for maximum 60 days. After sampling, they were extracted by the QuEChERS method and analyzed using the LC-MS/MS. Cyenopyrafen and cyflumetofen were detected in a range of 0.0106~2.6517 mg/kg and of 0.0005~1.4480 mg/kg, respectively. From this results, they were found to be suitable for PLS concentration after 30 or 45 days after spray. In addition, they were detected in most samples that were selected at random. Their concentrations were higher than the PLS criterion in the maximum twenty samples. Twelve of pesticides unsuitable for main export target countries have been detected in the monitoring of simultaneous multi-residue analysis. The result indicates they are unsuitable for export since they excesses over PLS criterion. CONCLUSION: The monitoring result showed it is necessary to establish the pesticide standards of safe use suitable for the PLS criterion. In addition, it is considered continues management and inspection are needed to solve problems caused by unsuitable pesticides in export strawberries.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.4
• /
• pp.55-61
• /
• 2009

Recently, the number of high-rise buildings being built in Korea by major construction companies for residential and commercial use has been increasing. When constructing a high-rise building, it is necessary to apply massive amounts of concrete to form a mat foundation that can withstand the huge load of the upper structure. However, it is of increasing concern that due to limitations in terms of the amount of placing equipment, available job-sites and systems for mass concrete placement in the construction field, it is not always possible to place a great quantity of concrete simultaneously in a large-scale mat foundation, and for this reason consistency between placement lift cannot be secured. In addition, a mat foundation Is likely to crack due to the stress caused by differences inhydration heat generation time. To derive a solution for these problems, this study provides test results of a hydration heat crack reduction method by applying placement lift change and setting time control with a super retarding agent for mass concrete in a large-scale mat foundation. Mock-up specimens with different mixtures and placement liftswere prepared at the job-site of a newly-constructed high-rise building. The test results show that slump flow of concrete before and after adding the super retarding agent somewhat Increases as the target retarding time gets longer, while the air content shows no great difference. The setting time was observed to be retarded as the target retarding time gets longer. As the target retarding time gets longer, compressive strength appears to be decreased at an early stage, but as time goes by, compressive strength gets higher, and the compressive strength at 28 days becomes equal or higher to that of plain concrete without a super retarding agent. For the effect of placement lift change and super retarding agent on the reduction of hydration heat, the application of 2 and 4 placement lifts and a super retarding agent makes it possible to secure consistency and reduce temperature difference between placement lifts, while also extending the time to reach peak temperature. This implies that the possibility of thermal crack induced by hydration heat is reduced. The best results are shown in the case of applying 4 placement lifts.

• Journal of Environmental Impact Assessment
• /
• v.32 no.2
• /
• pp.94-111
• /
• 2023

In order to establish an effective management strategy for invasive species early detection and regular monitoring are required to assess their introduction or dispersal. Environmental DNA (eDNA) is actively applied to evaluate the fauna including the presence of invasive species as it has high detection sensitivity and can detect multiple species simultaneously. In Korea, the applicability evaluation of metabarcoding is being conducted mainly on fish, and research on other taxa is insufficient. Therefore, this study identified the feasibility of detecting invasive species in Korea using eDNA metabarcoding. In addition, to confirm the possibility of detection by taxa, the detection of target species was evaluated using four universal primers (MiFish, MiMammal, Mibird, Amp16S) designed for fish, mammals, birds, and amphibians. As a result, target species (Trachemys scripta, 3 sites; Cervus nippon, 3 sites; Micropterus salmoides, 7 sites; Rana catesbeiana, 4 sites) were detected in 17 of the total 55 sites. Even in the selection of dense sampling sites within the study area, there was a difference in the detection result by reflecting the ecological characteristics of the target species. A comparison of community structures (species richness, abundance and diversity) based on the presence of invasive species focused on M.salmoides and T.scripta, showed higher diversity at the point where invasive species were detected. Also, 1 to 4 more species were detected and abundance was also up to 1.7 times higher. The results of invasive species detection through metabarcoding and the comparison of community structures indicate that the accumulation of large amounts of monitoring data through eDNA can be efficiently utilized for multidimensional ecosystem evaluation. In addition, it suggested that eDNA can be used as major data for evaluation and prediction, such as tracking biological changes caused by artificial and natural factors and environmental impact assessment.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.18 no.2_spc
• /
• pp.291-303
• /
• 2020

The Kori-Unit 1 nuclear power plant, which is scheduled to be decommissioned after permanent shutdown, is expected to generate large amounts of various types of radioactive waste during the decommissioning process. Among these, nuclear reactors and internal structures have high levels of radioactivity and the dismantled structure must have the proper size and weight on the primary side. During decommissioning, it is important to prepare an appropriate and efficient disposal method through analysis of the disposal status and the legal restrictions on wastes generated from the reactors and internal structures. Nuclear reactors and internal structures generate radioactive wastes of various levels, such as medium, very low, and clearance. A radiation evaluation indicates that wastes in the clearance level are generated in the reactor head and upper head insulation. In this study, a clearance waste safety evaluation was conducted using the RESRAD-RECYCLE code, which is a safety evaluation code, based on the activation evaluation results for the clearance level wastes. The clearance scenario for the target radioactive waste was selected and the maximum individual and collective exposure doses at the time of clearance were calculated to determine whether the clearance criteria limit prescribed by the Nuclear Safety Act was satisfied. The evaluation results indicated that the doses were significantly low, and the clearance criteria were satisfied. Based on the safety assessment results, an appropriate metal recycle and disposal method were suggested for clearance, which are the subject of the deregulation of internal structures of nuclear power plant.

• Journal of Life Science
• /
• v.15 no.5 s.72
• /
• pp.755-762
• /
• 2005

Biochemical amounts of RNA molecules can be synthesized in vitro, which is functionally equivalent or similar to those transcripts normally existing at extremely low levels in vivo. In this study we described a method for efficient preparation of pure T7 RNA polymerase from Escherichia coli strain BL21/pAR1219. The procedure, which used ammonium sulfate fractionation and preparative column chromatography on sephadex SP, was shown to be simple, rapid, and cost effective in comparison with other methods reported previously, Using the purified T7 RNA polymerase we were able to synthesize very long RNA transcript of 1.54 kb length, which is not feasible by conventional chemical synthesis. RNA molecule that was also synthesized by the purified T7 RNA polymerase, such as hammerhead ribozyme, retained its biochemical activity by cleaving the target RNA successfully in vitro. Thus, the procedure shown in this study can be useful to synthesize any length of RNA molecules in vitro in a simple and cost effective way for a variety of purposes.