• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(1)
• /
• pp.271-274
• /
• 2000

In this paper, the distortion of an electrical pulse with rise/fall time resulting from dispersion and reflection as it propagates along a tapered microstrip line is investigated, and the delay time and distortion rate with respect to input and load impedances are analyzed on triangular and exponential tapered lines and analyzed the influence of the reflection and frequency dispersion on the distorted voltage wave in the tapered lines. The observed overshoot in front of the distorted wave is caused due to the frequency dispersion and the sustained tail of that comes from the reflection in the tapered line.

• 대한전자공학회논문지
• /
• 제9권2호
• /
• pp.1-16
• /
• 1972

본논문은 특성임퍼이던스가 선형적으로 변화하는 단일 Strip선로의 특성파라미터를 이용하여, 우선 even-mode 및 odd-mode임피이던스가 모두 선형적으로 변화하는 비대칭형인 결합Strip선로의 특성파라미터를 구하였다. 다음에는 상기한 비대칭결합Strip선로를 종속연결한 대칭형결합Strip선로를 구성하고, 선로단자조건에 따라서 결합Strip선로가 갖는 여파특성을 고찰하였다. 선형 결합Strip선로의 특성을 해석한 결과, 선형결합Strip선로는 균일Strip선로를 사용하는 경우에 비하여 몇가지 점에서 좋은 여파특성을 갖고 있음을 명시하였다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권1호
• /
• pp.40-44
• /
• 2006

In this paper, the distortion characteristics of an electrical pulse which has a rise/fall time due to the dispersion and the reflection, on nonuniform tapered microstrip lines has investigated in time domain. The transmission characteristics on uniform microstrip lines in time domain had represented already, but the results for the nonuniform tapered microstrip lines not represented yet. We investigated the transmission characteristics for pulse signal on the nonuniform tapered microstrip lines, and the result applied to design of wide band impedance matching circuit in design of MMIC. The voltage and current transfer functions are shown for the tapered line. The dispersion and distortion obtained by using these transfer functions are represented for the nonideal square pulse.

• 전자공학회논문지D
• /
• 제36D권8호
• /
• pp.1-6
• /
• 1999

MCM 또는 MIC등에서 광대역 임피던스 정합을 위해 데이퍼 선로를 이용할 때 주파수 영역의 전송 특성만을 고려하는 경항이 있다. 본 논문에서는 테이퍼형 비균일 전송선로에서 디지털 펄스가 전송될 때 시간 영역에서 분산과 반사에 의해 나타나는 신호의 왜곡 특성을 해석하였다. 삼각형과 지수분포형 테이퍼에서 입력과 부하임피던스의 비에 따라 상승/하강 시간을 갖는 펄스를 입력 했을 때 지연과 왜곡 특성을 비교하였다. 위상 정수의 분산 모델은 정확도가 우수한 Kirchning-Jansen의 것을 사용하였으며, 삼각형 테이퍼가 지수형 테이퍼에 비해 시간 지연 특성은 좋게 나타났으나 왜곡이 심하게 나타났다. 시간 영역에서 펄스의 반사 신호의 진폭을 계산하여 나타내었다.

• 전자공학회논문지A
• /
• 제32A권8호
• /
• pp.56-63
• /
• 1995

A new method is presented for the synthesis of lossy tapered transmission line having presecribed frequency characteristic in the passband. The theory of lossy case extends lossless cases suggested by Klopfenstein and others, and a special optimization process based on the Fourier transfrom pair and generalized Taylor's procedure is proposed for exact designs of frequency-dependent and distance-dependent lossy tapered line. The process is achieved by control of zero points of lobe-like input reflection coefficient. The validity of the suggested method is confirmed by synthesizing a lossy microstrip transformer and analyzing the simulation results.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.2016-2018
• /
• 2002

An exact solution of the lossy linear tapered transmission line is derived. As its application, a simple design method of the quasi non-distortion lossy linear tapered transmission line in the time domain is described. A design example is presented to show the validity and usefulness of the method.

• 대한전자공학회논문지TC
• /
• 제37권8호
• /
• pp.45-51
• /
• 2000

본 논문에서는 지수형, 삼각형 및 체비쉐브 테이퍼 전송선로에서 디지털 펄스가 전송될 때 분산과 반사에 의해 나타나는 펄스의 왜곡 특성을 시간영역에서 해석하여 그 전송특성을 비교하여 나타내었다. 그리고 테이퍼 선로에서 전압과 전류의 전달함수를 구하여 상승과 하강 시간을 갖는 비이상형 구형 펄스를 입력했을 때 왜곡 특성을 해석하고, 선로에서 나타나는 분산과 반사가 파형의 왜곡에 미치는 영향을 분석하였다. 주파수 분산에 의한 왜곡은 파형에 오버슈트와 기울림이 나타났고, 반사에 의한 왜곡은 꼬리 부분에 잔류 특성이 나타났다.

• Journal of Electrical Engineering and Technology
• /
• 제10권3호
• /
• pp.1081-1085
• /
• 2015

In this paper a printed pair dipole antenna with double tapered microstrip balun for wireless communications is proposed. The proposed antenna consists of a pair arm of different sizes that is branched microstrip line and microstrip line with the ground plane on opposite side of the dielectric substrate plane. The proposed antenna is matched between the ground plane to the microstrip line by double tapered microstrip balun. This antenna obtains multi-band radiation frequency band. The impedance bandwidths for a reflection coefficient of VSWR ≤ 2 are about 1.01 GHz (2.35~3.336 GHz), 1.56 GHz (4.7~6.26 GHz) and 1.15GHz (6.85~8.0[GHz]). Additionally, the measurement peak gain is about 3.6 dBi. The proposed antenna is able to support wireless communication applications.

• Tribology and Lubricants
• /
• 제28권4호
• /
• pp.153-159
• /
• 2012

Tapered roller bearings are widely used in high axial-load and radial-load applications. In this study, a numerical analysis is performed to study a finite line contacts EHL problem between a tapered roller and raceway in tapered roller bearings. Converged solutions are obtained for moderate load and material parameters using a finite difference method with non-uniform grids and the Newton-Raphson method. The contours and sectional plots of pressure distribution and film shape are compared. The pressure distribution and film shapes near both ends of the roller are very different from those in the central part and are transversely asymmetric. The maximum pressure and absolute minimum film thickness always occur at the small end of the roller.

• Tribology and Lubricants
• /
• 제31권4호
• /
• pp.177-182
• /
• 2015

Tapered roller bearings are widely used in equipment where high combined thrust and radial loads are experienced. A certain amount of tilting between the tapered rollers and the races always occurs because of bending moment load conditions and shaft deflection. It is now well understood that a coherent elastohydrodynamic lubrication (EHL) film separates the rollers and races. In spite of extensive study on EHL problems for over half a century, relatively few studies have focused on the finite line contacts problem. This study presents a complete numerical analysis of the effects of roller tilting on the EHL characteristics in a tapered roller bearing. We systematically analyze this highly nonlinear problem using finite differences with fully non-uniform grids and the Newton-Raphson method. Detailed EHL pressure distributions and film shapes are presented under moderate loads and material parameters. A very small roller tilting significantly affects the pressure distributions and film shapes near both ends of the roller. Moreover, the effect of tilting on the EHL characteristics at the small end is much greater than that at the large end. Therefore, in designing optimum profiles for tapered roller bearings, the profile radius should be larger at the small end.