• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.12
• /
• pp.1035-1047
• /
• 2015

Wind tunnel experiment and computational analysis have been carried out to evaluate the performance of propeller for scale electric-powered HALE UAV, named EAV-2H+. Performance curves are measured for three propellers and their adequacy for EAV-2H+ installation is examined through consideration of operating conditions. Decline in performance coefficients is observed in low rpm region. Also, the effect of transition tape on propeller performance is measured and analyzed. The computational performance analyses are carried out by using commercial CFD program. The thrust and power coefficient from computations show good agreement with experimental results. Performance coefficients are compared and the influence of measurement device which contributes to discrepancy of the results is examined. Transition SST model is confirmed to yield the tendency of performance decline in low rpm range, similar to experimental observation. The decrease in aerodynamic performance of blade element due to low Reynolds number is identified to cause the decline in propeller performance. Analyses for high altitude conditions confirms degradation in propeller performance.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.13 no.2
• /
• pp.55-68
• /
• 2007

Object: to evaluate the effects of two different treatments-joint mobilization and therapeutic exercise on difference for length of lower limbs. Method: The subjects were participated twenty six who has difference for length of lower limbs more 10mm. All subjects randomly assigned to Joint mobilization group(n=13) and therapeutic exercise group. Joint mobilization group received joint mobilization for 2 minutes, Therapeutic exercise group received for 15 minutes per day and 3 times a week during 4 week period. Tape measure method was used to measure the difference for length of lower limbs. Biodex was used to measure the muscle power of lower limbs(Knee flexion, extension). Finger to floor test was used to measure the mobility of spinal column. All measurement of each subjects were measured at pre-experiment, after 2weeks and post-experiment. Result: The result of this study were summarized as follows : 1. Both treatment decreased difference for length of lower limbs while joint mobilization more decreased difference for length of lower limbs than therapeutic exercise. 2. Both treatment increased mobility of spinal column while joint mobilization more increased mobility of spinal column than therapeutic exercise. 3. Joint mobilization increased muscle power while therapeutic exercise decreased muscle power. Conclusion: in a group-wise comparison joint mobilization is more effective than therapeutic exercise.

• Archives of design research
• /
• v.11 no.2
• /
• pp.95-103
• /
• 1998

During design thinking and developing, its idea into the real world, and we are under pattern recognition and gestalt principles of perceptual organization. Generally originality is a part of creativity which consists an integral factor of the designing. This is a study on the measure system for an ability of originality in design. It is reorganized that the OTLD(Originality Test of Line Drawing) is a measuring system for personal originality. In order to catch the development the thoughts, we presented 10 picture planes as stimuli (each picture plane contained 3-18 dots), recorded the tape displaying eye-mark trajectories and outputting the trajectories with EMR(Eye Mark Recorder), then found the process of visual sensation and perception. From the results of this study, we examined the relationships between connections and complexity of the objects on the picture plane, which could be transformed into some objective measuring parameters. We would suggest this OLTD as a measurement system for an ability of originality in design fields, but we couldn't find any reliability and validity for fine art fields.

• Fashion & Textile Research Journal
• /
• v.20 no.2
• /
• pp.219-225
• /
• 2018

The purpose of this study is to make an ideal dummy for adult Maltese with proper investigation of its character and direct measurement of dog body-shape. The results of the study are as follows; First, there were 6 factors to affect the characteristics of Maltese body in the analysis, which are size of body, leg shape, chest shape, leg thickness, body length, length between fore-legs. In the cluster analysis with the 6 factors there were two types of Maltese body. Type 1 has body characteristics with large body, thick leg, and small distance between front legs. Type 2 has average size of all factors including body size, leg thickness, and length between fore-legs. Second, type 2 was selected as a representative one to make a dummy reflected body shape of characteristics because it took 67.71% from entire considered factors and has average value in the measured size. The first dummy pattern was planned by copying the surface area of the representative body shape with the method of surgical tape. A dummy of single body with trunk and legs was made using 30's cotton cloth, polyester inside batting, compressed form PVC and metallic wire on the joint of trunk and legs to support dummy shape. The second pattern was made by correcting size difference of the pattern and adding the pattern of neck covering plate, metal magnetic button was inserted on the center of joint area of trunk and legs to make detachable legs for easy slip on and off the pet's wear.

• Journal of Animal Science and Technology
• /
• v.61 no.6
• /
• pp.366-370
• /
• 2019

Overweight and obesity induce serious health problems that exert negative effects on dog's welfare. Body condition score (BCS) is a common method to evaluate the body fat mass in animals. By palpating and observing fats under the skin it is possible to predict animal's body fat accumulation condition. BCS is also a useful tool to estimate body fat composition in dogs. However, BCS can be subjective when it was performed by non-professionals like pet's owners. To develop a method to avoid the misevaluation of BCS twenty-four Beagles were enrolled and performed BCS evaluation. In addition, the length of chest and abdominal girths were measured. In correlation analysis, the sizes of chest and abdominal girth were significantly correlated with BCS. Especially, the difference and ratio of the chest and abdominal length were highly correlated with the BCS. With that, we suggested that this simple measurement of chest and abdominal girths by a measuring tape would be an effective method to estimate BCS scores in dogs that helps non-professionals to manage their own dog's nutritional condition by monitoring body fat accumulation condition.

• 보존과학연구
• /
• s.34
• /
• pp.32-48
• /
• 2013

This study examined the applicability of deterioration monitoring techniques to establish efficient conservation and management system for stone cultural heritage which conservation treatment has been done. It was confirmed that deterioration mapping combined with photography and grid work, and adhesive tape test for the surface were very applicable to investigate the surface change due to deterioration, and assess the degree of granular disintegration quantitatively. The portable microscopic survey and ultrasonic measurement were efficient techniques to observe mineral looseness and microcrack, and to track the strength change of the stone before-and-after the conservation treatment. These techniques can be easily used by manage practitioners in the field through simple guidance and technical education. Also, it can contribute to build a long-term and methodical conservation and management system of the stone cultural heritage.

• Journal of the Korean Ceramic Society
• /
• v.36 no.2
• /
• pp.122-129
• /
• 1999

Alumina tapes, having various weight ratios of alumina powder/(alumina+binder+plasticizer), X, and binder / (binder+plsticizer), Y, were prepared and their complex modulus was measured using Micro Fourier Rheometer. As the X and Y ratios increased, Transfer function(TF) magnitude and Transfer function (TF) phase increased and decreased, respectively, indicating that the elastic modulus of the tapes depends on the weight ratios. The temperature dependence of the viscosity of the tapes was visualized by the decreased TF magnitude and the increased TF phase. The Y ratio dependence of the complex modulus related to the glass transition temperature of the tapes and the moduls change by the Y ratio was higher than that by the X ratio within the comperature of the tapes and the modulus changes by the Y ratio was higher than that by the X ratio within the composition range, investigated in the present study. The measurement of the complex modulus of the alumina tapes suggested that the TF phase should be higher that 17$^{\circ}$for the tapes to be utilized for 3-dimensional shaping.

• Journal of Animal Environmental Science
• /
• v.8 no.3
• /
• pp.171-176
• /
• 2002

Physical parameters of milk cow were measured to design and build RMS(Robotic Milking System) with a tape-measurer and body parameter measurer. The parameters are very important variables to design an RMS. For the working zone space of an RMS manipulator and the movement blunting of milk cow, an interval frame was installed on the stall bottom, and then cow's behavioral reactions were tested. The results from this study is summarized as follow. 1. On the general physical condition measurement, the maximum, minimum and average body length of cow which is related to the space that the manipulator could work into the RMS were 175cm, 144cm, and 163cm respectively. It appeared that the average distance between bottom and chest was 60cm. 2. The average length between fore teats, fore and hind teats and hind teats were 178mm, 150mm and 95mm respectively. It appeared that the average length between bottom and teat attachments was 544mm, and the average length between fore teats and tail-end was 331mm. 3. Although a cow kept a some extent length between hind legs for milking, it looked a stable pose. However, the cow kept a some extent distance between front legs for milking, it looked a unstable pose. Based on results of this test, an interval frame of stall bottom should be installed around the position which was located at its hind legs.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.22 no.2
• /
• pp.35-39
• /
• 2016

Background: The superficial lymphatic system is divided into areas called lymphatic territories which are separated by watersheds. When the lymphatic system fails to remove its load either due to surgery, radiotherapy or some congenital malformation of it then the fluid and the proteins and wastes contained within it accumulates in that territory. Anastomotic connections exist across the watersheds and while they can work unaided manual lymph drainage (MLD) can significantly help drainage across them into unaffected lymphatic territories. The purpose of the study is to examine the effectiveness of a manual technique in moving fluids and softening hardened tissues using a tape measure and Patient-Specific Functional Scale. Methods: We examined the movement of fluids from the affected limbs of lymphedema patients who underwent a standardized 30-min treatment using the Dr. Vodder method of MLD. We chose a typical cross section of patients with secondary leg or secondary arm lymphedema. The lymphedema patient was also measured after the conclusion of treatment and underwent a follow-up control measurement, within 8 weeks. Both evaluation tools indicated a movement of fluid to different and unblocked lymphatic territories as well as a softening of tissues in some of the affected limbs. Results: MLD is an effective means of fluid clearance when it accumulates as a consequence of a failure of the lymphatic system. It seems likely that MLD has a systemic effect on the lymphatic system and that it can improve flow from otherwise normal tissues. Conclusions: It is hypothesized that a series of treatments would result in even more significant improvements.

• Asian Oncology Nursing
• /
• v.2 no.1
• /
• pp.50-60
• /
• 2002

Breast self-exam is easiest, safe and cost effective to be recommended as an important method for early detection of breast cancer. This experimental research with non-equal control design was to develop the efficacy expectation program for breast self-exam based on Bandura's self-efficacy information source. The study objects selected from two local churches in Busan. Twenty from S church were selected as a study group, twenty from D church as a control group. Efficacy expectation promoting program was based on Bandura's efficacy promoting source and was two hour lecture including slide, video tape, demonstration, pamphlet. After this, there were individual interviews with them and consultations through telephone f or verbal persuasion on the weekly basis between the first week and the fifth week. The effect from the experiment were measured on the first week after education and on the fifth week. Data from control group was collected during the period from Jan 11, 2 001 to Feb 15, 2001 and data from study group was collected during the period from Jan 12, 2001 to Feb 16, 2001. Measurement instrument for this study was developed by the author with the advice of specialist in order to measure self-efficacy and breast self-exam practice. Data analysis was done by using SPSS/10.0 PC program $with^2-$ test. t-test and ANCOVA. Proved results for hypothesis were as follows. 1) It was supported that "Study group educated by efficacy expectation promoting program has higher score in change rat e of self-efficacy than control group." (1 week after education F=18.395, p=.000 5 weeks after education F=28.972, p=.000) 2) It was supported that "Study group educated by efficacy expectation promoting program has higher score in change rate of exam practice than control group." (1 week after education F=37.984, p=.000 5 weeks after education F=28.972, p=.000) In conclusion, efficacy expectation promoting program for breast self-exam developed by this study may increase s elf-efficacy and breast self-exam practice.