• Journal of the Korean Institute of Gas
• /
• v.9 no.4 s.29
• /
• pp.57-61
• /
• 2005

The objective of paper is to carry out a comparative Quantitative Risk Assessment (QRA) of two KOGAS tank designs using a fault tree methodology, a standard 'Full Containment' tank and a 'Membrane' tank. For the membrane tank, both the initial KOGAS design and 4 modified KOGAS designs have been assessed, giving six separate cases. In this paper, the frequencies of releases are quantified using a fault tree approach. For clarity in the analysis, and to ensure consistency, all cases have been quantified using the same fault tree. Logic within the fault tree is used to select each of the cases. Full quantification of risks is often difficult, owing to a lack of relevant failure data, but the aim of this study has been to be as quantitative as possible, with full transparency of failure information. The most significant general cause of external LNG leaks is predicted to be a seismic event, which has been quantified nominally. 4modified KOGAS desiens to Prevent damage of bottom membrane panels that was shown in preparatory estimation could quantitively confirm safety improvement. According to result, the predicted frequencies of an external LNG leak for the full containment and modified membrane tanks are very similar, failures due to dropped pumps are predicted to be significantly greater for the membrane tank with thickened plate than for the full containment tank.

• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.4
• /
• pp.97-105
• /
• 1996

For the minimum weight design of ship structures it is desirable that tank arrangement is predetermined to obtain the minimum weight and then structural arrangement and scanting of each murder is determined to obtain the minimum weight within the given tank arrangement. To carry out the tank arrangement to give minimum weight a minimum weight design program which covers whole ship structures is developed by the combination of minimum weight design program of longitudinal members by classification rules and minimum weight design program of transverse members by generalized slope deflection method which were developed by the authors. The hullweight is estimated by summation of the weight of cargo hold part and the weight except cargo hold part which can be estimated by the empirical formula. In this study, the variation of hullweight is shown with the number of tank, the number of web and the location of longitudinal bulkhead. For the application of actual design alternative designs of tank arrangement which satisfy MARPOL regulation are determined. And several minimum weight designs of whole ship structures are carried out to obtain the tank arrangement which gives minimum weight and then the hullweight is compared with that of existing ship.

• 한국태양에너지학회:학술대회논문집
• /
• 2008.11a
• /
• pp.178-183
• /
• 2008

The purpose of this study is to compare the effect on the thermal stratification under various aspect ratios in the solar storage tank using FLUENT. Numerical calculations of three designs with different aspect ratio were carried out to show the behaviour of stratification in a solar storage tank. The calculation results show that the thermal stratification of the 2.5:1 aspect ratio solar storage tank can be 6.22% higher then that of the 1.5:1 aspect ratio solar storage tank and 2.68% higher then that of the 2:1 aspect ratio solar storage tank.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.10
• /
• pp.1458-1466
• /
• 2004

Deterministic optimum designs that are obtained without consideration of uncertainties could lead to unrealiable designs. Such deterministic engineering optimization tends to promote the structural system with less reliability redundancy than obtained with conventional design procedures using the factor of safety. Consequently, deterministic optimized structures will usually have higher failure probabilities than unoptimized structures. This paper proposes the reliability based design optimization technique fur apressure tank considering temperature effect. This paper presents an efficient and stable reliability based design optimization method by using the advanced first order second moment method, which evaluates a probabilistic constraint for more accuracy. In addition, the response surface method is utilized to approximate the performance functions describing the system characteristics in the reliability based design optimization procedure.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.711-715
• /
• 1995

In the concept design stage of the product design process, it is desirable that a designer makes alternative designs sufficiently, examines and analyzes them, and finally determines an appropriate design. To efficiently investigate several alternative designs, it should be facilitated to modify the model and transfer the model data to analysis program. In this research, a concept design process for tank is automated using I-DEAS feature-based modeling system from SDRC. Additionally, the facility for the pre-estimation of the performance of product, the useful volume calculation, the mass calculation, the confirmation of the allowable workspae, and the interface to analysis propram are developed using API functions of OPen-link and Open-data. Graphic User Interface (GUI) makes it extrmely easy to utilize functions.

• Transactions of Materials Processing
• /
• v.22 no.7
• /
• pp.389-393
• /
• 2013

One of the most efficient designs for manufacturing LNG tank is the Moss spherical type because it has been validated through precise analyses with respect to reliability and construction safety by stress analysis. The Moss spherical tank is assembled with hundreds of Al thick plate patches that are deformed to curved shape at elevated temperature and welded together. It is essential to evaluate the amount of deflection in the Al5083 thick plate when the patch is transferred from the heating chamber to the forming die since the patch has a length of 12,000 mm and a thickness of 60 mm. Based on FE analysis results, a design procedure for minimizing deflection in Al5083 thick plate during transfer using a moving carrier is demonstrated in this paper.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.11 no.2
• /
• pp.662-670
• /
• 2019

Tanker cargo tanks are equipped with the means of raising and maintaining the cargo discharge temperature to a suitable level. In this paper, a new heating coil design is proposed and analyzed. Contrary to conventional designs, wherein the heating coils are evenly distributed over the tank bottom, the proposed design arranges the heating coils in the central part of the tank bottom, in a vertical direction. Due to the intensive cargo circulation generated, a forced convection is superimposed on a buoyancy-driven natural convection, providing a more efficient mixed convection heat transfer mechanism. Numerical simulations performed by using a finite volume method show that in the case of 7-bar steam Bunker C heavy fuel oil heating, a five-hour circulation phase average heat transfer coefficient equals 199.2 W/m²K. This result might be taken as an impetus for the more thorough experimental examination.

• 한국가스학회:학술대회논문집
• /
• 2004.11a
• /
• pp.207-214
• /
• 2004

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.8
• /
• pp.1059-1067
• /
• 2013

Automotive fuel tank is generally divided into two parts: main frame and assembly parts. While the car is running, valves are used to prevent liquid carry over and to discharge evaporated gas from the fuel tank. However, current fuel tank designs focus on the gas ventilation or secured location. In this study, the location of the parts used to prevent liquid carry over within the fuel tank is evaluated during an optimal design process. To develop this design process, an approximate optimization is applied. Through the optimal design process, the optimal valve location in fuel tank is determined and the approximate optimization is validated by the Taguchi method. Finally, the optimized valve location is used to reduce the development cost and time and to contribute toward improved automobile quality owing to enhanced reliability.

• Journal of Ocean Engineering and Technology
• /
• v.28 no.1
• /
• pp.1-5
• /
• 2014

Chosun University, in cooperation with SPP shipyard, has developed an energy saving device based on a new concept: "Crown Duct." Crown Duct is composed of a semi-duct with short struts inside and outside the duct. Theoretical calculations for two different designs were carried out using the CFD code "Ship Flow." The design selected from these two different forms by the CFD code analysis was tested in a towing tank at SSPA. The results showed about 4% efficiency gain under a full-load condition and about 7% gain under a ballast condition in the towing tank test.