• 한국분무공학회지
• /
• 제22권2호
• /
• pp.62-68
• /
• 2017

It is important to study on the combustion instability to develop liquid rocket engines for preventing lower combustion efficiency and destruction of combustion chamber. There are many researches on simplex injector with liquid pulsation to solve this problem. In real rocket engine system, however, they use coaxial injectors. Therefore, research on coaxial injector with liquid pulsation is essential. In this study, we investigate dynamic characteristics of gas centered swirl coaxial injector varying tangential inlet diameter. A mechanical pulsator was used to generate an excitation in the liquid flow, and the response characteristics of the injector were confirmed. As tangential inlet diameter increased, mass flow rates increased and spray angle decreased. As tangential inlet diamter decreased, gain decreased because the pressure fluctuation in the injector manifold rarely passed through the inlet. Additionally, it was confirmed that a sufficiently small tangential inlet served as a damper.

• 한국가시화정보학회지
• /
• 제16권2호
• /
• pp.45-52
• /
• 2018

The tangential and axial cyclones were fabricated using a 3D printer and the total collecting efficiency, cut-diameter, and pressure drop characteristics of the two types of cyclones with the same inlet area were investigated experimentally. The results show that the total collecting efficiency tends to increase as the inlet velocity increases. However, at a 20m/s condition of the tangential cyclone, the collected particles were re-entrained to the ascending vortex flow, resulting in a decrease of the total collecting efficiency. In the axial cyclone, the cross-sectional area is designed to increase at the inlet and the velocity is reduced, so that the re-entrainment effect does not appear in this study. The pressure loss of the tangential cyclone was larger than that of the axial cyclone. The cut-diameter tends to decrease with increasing the inlet velocity in two types of cyclones, except for the 20m/s condition of the tangential cyclone.

• 한국대기환경학회지
• /
• 제16권2호
• /
• pp.179-190
• /
• 2000

The main object of this study was to investigate experimentally the characteristics of electrostatic cyclone-bag filter with upper tangential inlet in order to overcome the low collection efficiency for the submicron particle and high pressure drop which were main problems of general fabric bag filters. The experiment was carried out for the analysis of collection efficiency and pressure drop of electrostatic cyclone-bag filter comparing to those of fabric bag filter with various experimental parameters such as the inlet velocity(filtration velocity) and applied voltage etc. In the results the upper tangential inlet type showed higher collection efficiency for submicron particles below 2 ${\mu}{\textrm}{m}$ in diameter than that of center inlet and over 99.9% for overall collection efficiency. Pressure drop reduction ratios were shown as 40-50% for the applied voltage 0kV by centrifugal force and 70-90% for 20k V by the centrifuga and electrostatic force with the tangential inlet velocity (12-21m/s)

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1969-1974
• /
• 2004

The performance of small cyclone is analysed by an experiment for the purpose of developing a bag-less vacuum cleaner. For the high collection efficiency and low pressure loss cyclone, the effect of cyclone inlet feature must be well understood. Four types of the helical inlet are considered to compare with the normal tangential inlet, and also various inlet velocities are used to each inlet type. Based on the reference dimension, each type of inlet shows the changes of the grade efficiency and pressure loss which determine the cyclone quality. The results show that the helical inlet has the smaller cut-size but bigger pressure loss than the tangential inlet. And the degree of opening area influences factors of cyclone performance. As the inlet velocity is increased, the cut-size becomes smaller and the pressure loss becomes bigger of each cyclone. Further studies are required to understand the optimized helical inlet of cyclone.

• 한국수자원학회논문집
• /
• 제52권3호
• /
• pp.227-234
• /
• 2019

급격한 도시화와 산업화로 도심 재난 취약성이 증가하고, 전 세계적인 기후변화로 인한 극한 강우사상의 발생빈도가 증가하고 있다. 기존 방재시설의 용량한계를 넘어선 극한 강우사상의 발생으로 도심 지역의 침수피해 또한 증가하고 있다. 도심 침수피해를 예방하기 위해 지하공간을 활용한 지하저류 시설과 지하배수터널 활용이 급부상하고 있으며, 강우가 유입되는 지하유입구에 대한 수리학적 검토를 통한 성능 분석이 중요하다. 본 연구에서는 지하 유입구로 활용되고 있는 접선식(tangential) 유입구와 나선식(spiral) 유입구에 대해 유입유량 변화에 따른 유입부 수위를 계측하고 흐름 특성 변화를 분석했다. 나선식 유입구의 경우, 저유량 조건에서의 와류 유도 효과를 개선하기 위해 유입부 바닥면에 계단형 다단식 구조를 도입했다. 접선식 유입구에서는 고유량 유입조건 아래 도수(hydraulic jump)가 발생하며 유량 배제 효과가 급격하게 감소했다. 다단식 나선(multi-stage) 유입구의 경우, 접선식 유입구보다 유입유량 증가에 따른 수위 상승률은 높지만 저유량 및 고유량 유입조건에 대해 안정적인 유량 배제 효과를 유지했다. 또한, 실험에서 사용된 유입구 모형이 활용될 수 있도록 접선식 유입구와 다단식 나선 유입구 모형에 대한 수위-유량 관계 실험식(empirical formula)을 제시했다.

• 한국수자원학회논문집
• /
• 제52권4호
• /
• pp.235-243
• /
• 2019

급격한 기상변화로 인한 극한 강우와 집중폭우의 발생빈도 증가로 기존 수방시설의 한계 용량을 초과해 도심지 침수피해가 빈번하게 발생하고 있다. 최근 도시화 추세가 급격하게 빨라지면서 수방시설 등 사회기반시설에 대한 지하공간 개발의 필요성이 증가하고 있으며, 지하공간을 활용한 지하방수로와 지하저류지 기술이 급부상하고 있다. 본 연구에서는 지하유입시설의 대표적 형상인 접선식 유입구와 나선식 유입구에 대한 공기 배출효과를 분석하기 위해 유입유량 변화에 따른 수직갱 내부 공기공동(air-core)의 형상 크기를 계측했다. 나선식 유입구의 경우, 저유량 유입조건에서 와류 유도 효과를 개선하기 위해 유입부 바닥면에 계단형 다단식 구조를 도입했다. 수직갱 내부 공기공동의 전체적인 평균 단면적의 경우, 다단식 나선 유입구가 접선식 유입구보다 10% 정도 크게 나타나 고유량 유입조건에서 높은 공기 배출 효과와 유입효율을 나타냈다. 접선식 유입구의 경우, 유입구가 가지는 고유 성능을 유지할 수 있는 최대 유량 조건을 초과하면서 공기 배출 효과가 감소하기 시작했다. 또한, 실험에서 사용된 접선식 유입구와 다단식 나선 유입구 모형에 활용 가능한 기초자료를 제공하기 위해 수직갱 내부 위치에 따른 공기공동 단면적에 대한 실험식(empirical formula)을 제시했다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.158-161
• /
• 2001

A new type baghouse with tangential inlet and inner tube was developed and it's performances were evaluated. Experiments with variable shapes of inner tube were performed to suggest an optimum shape of inner tube which might decrease the dust loading onto bag filter surface and the amount of reentrained particles by internal gas flow. The dust loading was lower when inner tubes parallel to outer casing exist. When an inner tube covering around the lower portion of bag filters was used, the dust particles detached from the filter surface by cleaning process were reentraind by internal recirculating gas flow.

• Journal of Mechanical Science and Technology
• /
• 제15권12호
• /
• pp.1892-1899
• /
• 2001

An experimental study was performed for measuring velocity and turbulence intensity in a circular tube for Re= 10,000, 15,000 and 20,000, with swirl and without swirling flow. The velocity fields were measured using PIV techniques and swirl motion was produced by a tangential inlet condition. Some preliminary measurements indicated that over the first 4 diameter, two regions of flow reversal were set up (the so called 2-cell structure). At the highest Reynolds numbers, the maximum values of the measured axial velocity components had moved toward the test tube wall and produce more flow reversal at the conter of the tube. As the Reynolds number increased, the turbulence intensity of swilling flow at the tube inlet also increased.

• Journal of Mechanical Science and Technology
• /
• 제17권12호
• /
• pp.2042-2052
• /
• 2003

An experimental study was performed to investigate heat transfer characteristics of turbulent swirling flow in an axisymmetric annuli. The static pressure, the local flow temperature, and the wall temperature with decaying swirl were measured by using tangential inlet conditions and the friction factor and the local Nusselt number were calculated for Re=30000∼70000. The local Nusselt number was compared with that obtained from the Dittus-Boelter equation with swirl and without swirl. The results showed that the swirl enhances the heat transfer at the inlet and the outlet of the test tube.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.81.1-81.1
• /
• 2005