• Steel and Composite Structures
• /
• 제48권3호
• /
• pp.321-333
• /
• 2023

This paper proposes a comprehensive investigation on lateral stiffness of corner-supported steel modular frame using splice connection. A full-scale modular frame with two stacked steel modules under lateral load is tested. Ductile pattern in the transfer of lateral load is found in the final failure mode. Two types of lateral stiffness, including tangent stiffness and secant stiffness, are defined from the load-displacement due to the observed nonlinearity. The difference between these two types of stiffness is found around 20%. The comparisons between the experimental lateral stiffness and the predictions of classical methods are also conducted. The D-value method using hypothesis of independent case is a conservative option for predicting lateral stiffness, which is more recommended than method of contraflexural bending moment. Analyses on two classical short-rod models, including fix-rod model and pin-rod model, are further conducted. Results indicate that fix-rod model is more recommended than pin-rod model to simplify splice connection for simulation on lateral stiffness of modular frame in elastic design stage.

• 한국안전학회지
• /
• 제29권3호
• /
• pp.64-71
• /
• 2014

The generalized tangential stiffness matrix of semi-rigid frame element with shear deformations based on Haringx's shear theory is newly derived and compared with the previous study based on Engesser's shear theory. Also, linearized elastic and geometric stiffness matrices are newly presented from the exact tangential stiffness matrix. In oder to obtain the inelastic system buckling load of shear flexible semi-rigid frame structure, the Ef method by tangential modulus theory is adopted and the FE analysis programs are developed. Finally, the shear and semi-rigid effects of system bucking are investigated by two numerical examples.

• Computers and Concrete
• /
• 제5권3호
• /
• pp.217-241
• /
• 2008

In this paper, a total strain-based hysteretic material model based on MCFT is proposed for non-linear finite element analysis of reinforced concrete structures. Although many concrete models have been proposed for simulating behavior of structures under cyclic loading conditions, accurate simulations remain challenging due to uncertainties in materials, pitfalls of crude assumptions of existing models, and limited understanding of failure mechanisms. The proposed model is equipped with a fully generalized hysteresis rule and is formulated for 2D plane stress non-linear finite element analysis. The proposed model has been formulated in a tangent stiffness-based finite element scheme so that it can be used for most general finite element analysis packages. Moreover, it eliminates the need to check that tensile stresses can be transmitted across a crack. The tension stiffening model is a function of the bar orientation and any orientation can be accommodated. The proposed model has been verified with a series of experimental results of 2D RC planar panels. This study also demonstrates how parameters of the proposed model associated with cyclic damage modeling influences the pinched cyclic shear behavior.

• Structural Engineering and Mechanics
• /
• 제40권2호
• /
• pp.257-277
• /
• 2011

In this paper the geometrically nonlinear continuum plate finite element model, hitherto not reported in the literature, is developed using the total Lagrange formulation. With the layerwise displacement field of Reddy, nonlinear Green-Lagrange small strain large displacements relations (in the von Karman sense) and linear elastic orthotropic material properties for each lamina, the 3D elasticity equations are reduced to 2D problem and the nonlinear equilibrium integral form is obtained. By performing the linearization on nonlinear integral form and then the discretization on linearized integral form, tangent stiffness matrix is obtained with less manipulation and in more consistent form, compared to the one obtained using laminated element approach. Symmetric tangent stiffness matrixes, together with internal force vector are then utilized in Newton Raphson's method for the numerical solution of nonlinear incremental finite element equilibrium equations. Despite of its complex layer dependent numerical nature, the present model has no shear locking problems, compared to ESL (Equivalent Single Layer) models, or aspect ratio problems, as the 3D finite element may have when analyzing thin plate behavior. The originally coded MATLAB computer program for the finite element solution is used to verify the accuracy of the numerical model, by calculating nonlinear response of plates with different mechanical properties, which are isotropic, orthotropic and anisotropic (cross ply and angle ply), different plate thickness, different boundary conditions and different load direction (unloading/loading). The obtained results are compared with available results from the literature and the linear solutions from the author's previous papers.

• Steel and Composite Structures
• /
• 제39권4호
• /
• pp.419-433
• /
• 2021

In composite structures, shear connectors are crucial components to resist the relative slip between the steel and concrete, and thereby to achieve the composite actions. In the service stage, composite structures are usually in elastic state, so the elastic stiffness of the shear connection is a quite important parameter in the structural analysis of composite structures. Nevertheless, the existing studies mainly focus on the load-slip relationship rather than the tangent stiffness at the initial elastic stage. Furthermore, when composite beams subjected to torque or local load, shear connections are affected by both tensile force and shear force. However, the stiffness of shear connections under combined effects appears not to have been discussed hitherto. This paper investigates the initial elastic stiffness of stud connections under combined effects of biaxial forces. The initial expression and the relevant parameters are obtained by establishing a simplified analytical model of the stud connection. Afterwards, parametric finite element analysis is performed to investigate the effects of the relevant factors, including the stud length, stud diameter, elastic modulus of concrete, elastic modulus of steel and volume ratio of reinforcement. The feasibility of the proposed modelling has been proved by comparing with sufficient experimental tests. Based on the analytical analysis and the extensive numerical simulations, design equations for predicting the initial elastic stiffness of stud connections are proposed. The comparison between the equations and the data of finite element models demonstrates that the equations are accurate enough to serve for engineering communities.

• 한국전산구조공학회논문집
• /
• 제18권2호
• /
• pp.169-179
• /
• 2005

탄성 및 비탄성좌굴 고유치해석법을 이용하여 강절프레임의 보-기둥부재의 유효좌굴길이를 산정하는 개선된 방법을 제시한다. 이를 위하여 먼저 설계기준에 제시된 압축재의 내하력 곡선식으로부터 접선계수이론(tangent modulus theory)에 근거하여 세장비-접선계수(tangent modulus), 응력-변형률 곡선식을 유도한다. 이때 안정함수를 이용하여 보-기둥요소의 접선강성행렬을 얻고, 비탄성 좌굴 고유치해석법을 제시하며 이를 이용하여 유효좌굴길이를 산정하는 방법을 제시한다. 해석예제를 통하여 강절프레임에 탄성 및 비탄성좌굴해석법에 의한 유효좌굴길이 비교결과를 제시하고, 매개변수 연구 결과를 제시한다.

• Structural Engineering and Mechanics
• /
• 제26권6호
• /
• pp.651-672
• /
• 2007

This study presents an improved method that uses the elastic and inelastic system buckling analyses for determining the K-factors of steel column members. The inelastic system buckling analysis is based on the tangent modulus theory for a single column and the application is extended to the frame structural system. The tangent modulus of an inelastic column is first derived as a function of nominal compressive stress from the column strength curve given in the design codes. The tangential stiffness matrix of a beam-column element is then formulated by using the so-called stability function or Hermitian interpolation functions. Two inelastic system buckling analysis procedures are newly proposed by utilizing nonlinear eigenvalue analysis algorithms. Finally, a practical method for determining the K-factors of individual members in a steel frame structure is proposed based on the inelastic and/or elastic system buckling analyses. The K-factors according to the proposed procedure are calculated for numerical examples and compared with other results in available references.

• 대한토목학회논문집
• /
• 제31권5A호
• /
• pp.361-367
• /
• 2011

케이블구조의 기하학적 비선형해석을 위한 탄성포물선 케이블요소를 제시한다. 이를 위하여 먼저 탄성현수선 케이블요소에 대한 적합조건과 접선강도행렬 유도과정을 간략히 요약한다. 이를 토대로 장력이 충분히 도입되어 자중에 의한 처짐 형상이 포물선에 가깝다는 가정 하에서 무응력길이를 포함하는 탄성포물선 케이블요소의 비선형 힘-변형관계식과 접선강도행렬을 유도한다. 또한 현(chord) 방향으로 두 케이블요소의 등가 공칭장력식을 정의한다. 탄성포물선 케이블요소의 수치적인 정확성을 확인하기 위하여, 경사진 케이블을 한 개의 탄성현수선과 탄성포물선 케이블요소로 각각 모델링하여 매개변수 해석을 수행하고 비교, 분석한 결과를 제시한다. 제시된 탄성포물선요소는 충분한 정확도를 가지고 케이블지지 구조물의 초기치해석 및 기하비선형해석에 효과적으로 적용할 수 있을 것으로 판단된다.

• 대한조선학회지
• /
• 제27권1호
• /
• pp.24-34
• /
• 1990

본 연구에서는 축력과 굽힘모멘트의 조합하중(組合荷重)을 받는 손상원통부재의 최종강도(最終强度)를 해석하기위하여 간이유한요소해석이론을 정식화한다. 여기서, 굽힘 및 국부손상이 존재하는 원통부재(圓筒部材)를 보요소로 모델링하며, 각요소의 접선탄성강성행렬(接線彈性剛性行列)은 기하학적 비선형 효과를 고려하여 updated Lagrangian 기법에 의하여 도출한다. 이때, 국부손상부위의 강성이 외력에 대한 저항에 기여하는 정도는 비교적 작다고 생각되므로 요소의 강성평가시에 국부손상부위의 강성은 무시한다. 요소의 소성화는 국부손상부위의 영향을 고려한 전단면(全斷面) 소성강도(塑性强度) 상관관계식을 적용하여 요소의 각절점에서 판정하며, 접선(接線) 탄소성(彈塑性) 강성행렬(剛性行列)은 소성절점법(塑性節點法)에 의하여 계산한다. 마지막으로 본 연구에서 정식화한 해석법을 바탕으로 컴퓨터프로그램을 작성하고 실험 등에 의하여 얻어진 기존의 결과에 대해 재해석하여 본해석법의 정도와 유용성을 확인한다.

• Structural Engineering and Mechanics
• /
• 제11권4호
• /
• pp.423-442
• /
• 2001

This paper presents a method of elastic-plastic analysis for planar steel frames that provides the accuracy of distributed plasticity methods with the computational efficiency that is greater than that of distributed plasticity methods but less than that of plastic-hinge based methods. This method accounts for the effect of spread of plasticity accurately without discretization through the cross-section of a beam-column element, which is achieved by the following procedures. First, nonlinear equations describing the relationships between generalized stresses and strains of the cross-section are derived analytically. Next, nonlinear force-deformation relationships for the beam-column element are obtained through lengthwise integration of the generalized strains. Elastic-plastic flexibility coefficients are then calculated by differentiating the above element force-deformation relationships. Finally, an elastic-plastic stiffness matrix is obtained by making use of the flexibility-stiffness transformation. Adding the conventional geometric stiffness matrix to the elastic-plastic stiffness matrix results in the tangent stiffness matrix, which can readily be used to evaluate the load carrying capacity of steel frames following standard nonlinear analysis procedures. The accuracy of the proposed method is verified by several examples that are sensitive to the effect of spread of plasticity.