• 제목/요약/키워드: Tailing effect

검색결과 64건 처리시간 0.021초

DNA손상 및 돌연변이에 대한 명지버섯의 방어효능 (The Protective Effects of Ganoderma lucidum on the DNA Damage and Mutagenesis)

  • 이길수;공석경;최수영
    • Biomolecules & Therapeutics
    • /
    • 제11권2호
    • /
    • pp.139-144
    • /
    • 2003
  • Ganoderma lucidum is commonly known as medically potent mushroom, which has been widely used in China and other oriental countries for the treatment of various diseases, including cancer. In this report, we investigated the anti-oxidant and protective effect of Ganodema lucidum extract (GLE) against the DNA damage induced by free radical and U.V. In the assay of cell growth inhibition, the inhibitory cell growth rate induced by hydroxyl radical was dose-dependently decreased by GLE. This results support that GLE has a detoxifying activity against cytotoxicity of hydroxyl radical in E. coli cell. GLE also protected ColE1 plasmid DNA damage in the concentration of 200$\mu\textrm{g}$ per reaction on the DNA fragmentation assay. The nuclear tailing by hydrogen peroxide in single cell gel electrophoresis(SCGE) was decreased by GLE in the concentration of 50$\mu\textrm{g}$/ml. These data indicate that Ganoderma lucidum has an anti-oxidative activity to hydrogen peroxide. The mutation rate after irradiation of U.V. was reduced by 50$\mu\textrm{g}$/ml GLE and total number of Rif (Rifampicin) resistant mutants was decreased in a concentration dependent manner when added the GLE exogenously in a culture media. According to the results, it is likely that GLE has not only an anti-oxidative activity to hydroxyl radical but also an anti-mutagenic activity to U.V. mutagenesis.

산침출에 의한 광미중 비소성분의 제거에 관한 연구 (A Study on the Removal of Arsenic 1mm Closed-Mine Tailings by Acid-Leaching Process)

  • 오종기;이화영;김성규;이재령;박재구
    • 한국토양환경학회지
    • /
    • 제3권3호
    • /
    • pp.21-31
    • /
    • 1998
  • 폐광산 광미로부터 비소를 제거하기 위한 산침출 및 침전실험을 수행하였다. 다덕광산의 광미시료를 대상으로 염산 및 황산농도, 침출시간, 슬러리 농도에 따른 침출율의 변화를 조사함과 동시에 침출액 중의 비소성분을 침전시키기 위하여 pH조절과 Sodium Sulfide를 첨가하여 비소의 침전율을 관찰하였다. 염산침출의 경우 1시간 침출 후 산농도 및 슬러리 농도에 따라 40%에서 86%까지 비소침출율을 보였으며, 황산의 경우 47%∼77%의 침출율을 나타냈다. 침출시간에 따른 침출율의 변화는 10분이내에서 급격한 변화를 보이지만, 그후에는 침출시간이 증가함에 따라 완만한 증가를 보였다. 침출액중의 산농도가 높아지면 침출율이 증가하나 2N이상에서는 그 차이가 크지 않았다. 침출액을 반복사용할 경우 5회까지 꾸준히 침출이 일어나지만 그 증가폭은 점차 감소하였으며, 산농도가 높을수록 감소하는 추세가 보다 완만한 경향을 보였다. 침출액 중의 비소성분은 단순한 pH조절을 통하여 약 84%까지의 침전율을 보였으며, 침전제로 Sodium Sulfide 를 사용하였을 경우 99%이상의 침전율을 나타냈다.

  • PDF

구봉광산 주변 중금속의 분포양상 및 인근농경지와 하천수계에 미치는 영향 (Heavy Metal Distribution Patterns and Its Effect on Paddy Soils and Stream around Gubong Mine)

  • 이도경;정덕영;이규승
    • 한국토양환경학회지
    • /
    • 제2권3호
    • /
    • pp.69-80
    • /
    • 1997
  • 오염된 토양을 복원하기 위해서는 주변 환경에 있어서 오염원의 분포 특성과 오염원에 의한 피해 정도를 조사하는 것이 필요하다. 본 조사는 폐금속 광산으로부터 발생된 중금속 오염 현황에 대한 정보를 얻기 위하여 광미와 농경지 토양의 물리화학적 특성을 조사하였으며 광미와 농경지 토양, 그리고 하천 침전물의 시안, 카드뮴, 구리 , 납, 아연, 비소, 크롬, 그리고 수은의 함량을 조사하였다. 농경지 토양과 광미의 pH는 각각 5.4, 8.4이었다. 광미중 시안, 납, 카드뮴, 그리고 비소의 함량은 99.98, 1,752.12, 31.88, 298.50 mg/kg이었다. 이들 중금속의 함량은 공장 산업지역의 대책 기준치보다 높은 함량이었으며 농경지 토양에서 시안과 중금속의 평균량은 광산 주변 비오염지역보다 높았다. 특히, 하천 주변 농경지 토양의 중금속 함량은 다른 주변 농경지보다 높게 나타났다. 광미장 하부 하천의 시안과 중금속의 함량은 광미장의 함량과 비슷하였으나 광미장으로부터 거리에 멀어짐에 따라 하천에 잔존하는 시안과 중금속의 함량은 감소하는 경향을 보였다.

  • PDF

Representing Fuzzy, Uncertain Evidences and Confidence Propagation for Rule-Based System

  • Zhang, Tailing
    • 한국농업기계학회:학술대회논문집
    • /
    • 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
    • /
    • pp.1254-1263
    • /
    • 1993
  • Representing knowledge uncertainty , aggregating evidence confidences , and propagation uncertainties are three key elements that effect the ability of a rule-based expert system to represent domains with uncertainty . Fuzzy set theory provide a good mathematical tool for representing the vagueness associated with a variable when , as the condition of a rule , it only partially corresponds to the input data. However, the aggregation of ANDed and Ored confidences is not as simple as the intersection and union operators defined for fuzzy set membership. There is, in fact, a certain degree of compensation that occurs when an expert aggregates confidences associated with compound evidence . Further, expert often consider individual evidences to be varying importance , or weight , in their support for a conclusion. This paper presents a flexible approach for evaluating evidence and conclusion confidences. Evidences may be represented as fuzzy or nonfuzzy variables with as associat d degree of certainty . different weight can also be associated degree of certainty. Different weights can also be assigned to the individual condition in determining the confidence of compound evidence . Conclusion confidence is calculated using a modified approach combining the evidence confidence and a rule strength. The techniques developed offer a flexible framework for representing knowledge and propagating uncertainties. This framework has the potention to reflect human aggregation of uncertain information more accurately than simple minimum and maximum operator do.

  • PDF

Effects of Fracture Intersection Characteristics on Transport in Three-Dimensional Fracture Networks

  • Park, Young-Jin;Lee, Kang-Kun
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2001년도 추계학술발표회
    • /
    • pp.27-30
    • /
    • 2001
  • Flow and transport at fracture intersections, and their effects on network scale transport, are investigated in three-dimensional random fracture networks. Fracture intersection mixing rules complete mixing and streamline routing are defined in terms of fluxes normal to the intersection line between two fractures. By analyzing flow statistics and particle transfer probabilities distributed along fracture intersections, it is shown that for various network structures with power law size distributions of fractures, the choice of intersection mixing rule makes comparatively little difference in the overall simulated solute migration patterns. The occurrence and effects of local flows around an intersection (local flow cells) are emphasized. Transport simulations at fracture intersections indicate that local flow circulations can arise from variability within the hydraulic head distribution along intersections, and from the internal no flow condition along fracture boundaries. These local flow cells act as an effective mechanism to enhance the nondiffusive breakthrough tailing often observed in discrete fracture networks. It is shown that such non-Fickian (anomalous) solute transport can be accounted for by considering only advective transport, in the framework of a continuous time random walk model. To clarify the effect of forest environmental changes (forest type difference and clearcut) on water storage capacity in soil and stream flow, watershed had been investigated.

  • PDF

Adsorption and Thermal Regeneration of Toluene and Benzene on the Fixed Bed Packed with Activated Carbon and Activated Carbon Fiber

  • Kim, Jong-Hwa;Oh, Ok-Kyun;Haam, Seung-Joo;Lee, Chang-Ha;Kim, Woo-Sik
    • Carbon letters
    • /
    • 제2권1호
    • /
    • pp.44-54
    • /
    • 2001
  • The characteristics of adsorption and desorption of benzene and toluene were investigated at a fixed bed packed with the activated carbon and activated carbon fiber. Through breakthrough experiments under various feed concentration conditions, it was found that the slope of mass transfer zone and the tailing in the breakthrough curves were different from the feed conditions due to different heats of adsorption. In hot nitrogen desorption, the regeneration time and mass transfer zone of the toluene desorption curve were longer than those of the benzene desorption curve because of the difference in adsorption affinity. With an increase in the regeneration temperature, the height of roll-up and the sharpness of desorption curves increased but the regeneration times decreased. The adsorption capacities of the activated carbon and activated carbon fiber after three-time thermal regenerations decreased about 25% and 37% for benzene and 18% and 25% for toluene, respectively. To investigate the effect of the regeneration temperature on the energetic efficiency, the characteristic desorption temperatures of toluene and benzene were investigated by calculating purge gas consumption and temperature.

  • PDF

Potential use of mine tailings and fly ash in concrete

  • Sunil, B.M.;Manjunatha, L.S.;Ravi, Lolitha;Yaragal, Subhash C.
    • Advances in concrete construction
    • /
    • 제3권1호
    • /
    • pp.55-69
    • /
    • 2015
  • Tailing Material (TM) and Fly Ash (FA) are obtained as waste products from the mining and thermal industries. Studies were carried out to explore the possibility of utilizing TM as a part replacement to fine aggregate and FA as a part replacement to cement, in concrete mixes. The effect of replacing fine aggregate by TM and cement by FA on the standard sized specimen for compressive strength, split tensile strength, and flexural strengths are evaluated in this study. The concrete mix of M40 grade was adopted with water cement ratio equal to 0.40. Concrete mix with 35% TM and 65% natural sand (TM35/S65) has shown superior performance in strength as against (TM0/S100, TM30/S70, TM40/S60, TM50/S50, and TM60/S40). For this composition, studies were performed to propose the optimal replacement of Ordinary Portland Cement (OPC) by FA (Replacement levels studied were 20%, 30%, 40% and 50%). Replacement level of 20% OPC by FA, has shown about 0-5% more compressive strength as against the control mix, for both 28 day and 56 days of water curing. Interestingly results of split tensile and flexural strengths for 20% OPC replaced by FA, have shown strengths equal to that of no replacement (control mix).

Modeling the sensitivity of hydrogeological parameters associated with leaching of uranium transport in an unsaturated porous medium

  • Mohanadhas, Berlin;Govindarajan, Suresh Kumar
    • Environmental Engineering Research
    • /
    • 제23권4호
    • /
    • pp.462-473
    • /
    • 2018
  • The uranium ore residues from the legacies of past uranium mining and milling activities that resulted from the less stringent environmental standards along with the uranium residues from the existing nuclear power plants continue to be a cause of concern as the final uranium residues are not made safe from radiological and general safety point of view. The deposition of uranium in ponds increases the risk of groundwater getting contaminated as these residues essentially leach through the upper unsaturated geological formation. In this context, a numerical model has been developed in order to forecast the $^{238}U$ and its progenies concentration in an unsaturated soil. The developed numerical model is implemented in a hypothetical uranium tailing pond consisting of sandy soil and silty soil types. The numerical results show that the $^{238}U$ and its progenies are migrating up to the depth of 90 m and 800 m after 10 y in silty and sandy soil, respectively. Essentially, silt may reduce the risk of contamination in the groundwater for longer time span and at the deeper depths. In general, a coupled effect of sorption and hydro-geological parameters (soil type, moisture context and hydraulic conductivity) decides the resultant uranium transport in subsurface environment.

On the effect of void ratio and particle breakage on saturated hydraulic conductivity of tailing materials

  • Ma, Changkun;Zhang, Chao;Chen, Qinglin;Pan, Zhenkai;Ma, Lei
    • Geomechanics and Engineering
    • /
    • 제25권2호
    • /
    • pp.159-170
    • /
    • 2021
  • Particle size of tailings in different areas of dams varies due to sedimentation and separation. Saturated hydraulic conductivity of high-stacked talings materials are seriously affected by void ratio and particle breakage. Conjoined consolidation permeability tests were carried out using a self-developed high-stress permeability and consolidation apparatus. The hydraulic conductivity decreases nonlinearly with the increase of consolidation pressure. The seepage pattern of coarse-particle tailings is channel flow, and the seepage pattern of fine-particle tailings is scattered flow. The change rate of hydraulic conductivity of tailings with different particle sizes under high consolidation pressure tends to be identical. A hydraulic conductivity hysteresis is found in coarse-particle tailings. The hydraulic conductivity hysteresis is more obvious when the water head is lower. A new hydraulic conductivity-void ratio equation was derived by introducing the concept of effective void ratio and breakage index. The equation integrated the hydraulic conductivity equation with different particle sizes over a wide range of consolidation pressures.

Analytical Quality by Design Methodology Approach for Simultaneous Quantitation of Paeoniflorin and Decursin in Herbal Medicine by RP-HPLC Analysis

  • Kim, Min Kyoung;Park, Geonha;Hong, Seon-Pyo;Jang, Young Pyo
    • Natural Product Sciences
    • /
    • 제27권4호
    • /
    • pp.264-273
    • /
    • 2021
  • Simultaneous quantification of multiple marker compounds in herbal medicine by high performance liquid chromatography (HPLC) analysis is still a challenge due to the complexity in various parameters to be considered and co-existing multi-components. As a case study, a reliable HPLC method for simultaneous quantification of paeoniflorin from Paeoniae Radix and decursin from Angelicae Gigantis Radix in various commercial herbal medicine was developed based on analytical quality by design (AQbD) strategy. As a first step, risk assessment was performed to select the critical method parameters (CMPs) which were decided as organic mobile phase ratio and column oven temperature. In order to evaluate the effect of the CMPs on critical method attributes (CMAs) of peak resolution and tailing, central composite design (CCD) was employed. The final chromatographic conditions were optimized as follows: column- C18, 4.6 × 250 mm, 5 ㎛ particle size; mobile phase- A: acetonitrile, B: 0.1% acetic acid water; detection wavelength- 235 nm for paeoniflorin, 325 nm for decursin; column oven temperature- 25℃; flow rate- 1.0 mL/min; gradient mobile phase system as Time (min) : % A, 0:14, 25:14, 30:50, 60:50, 61:100, 65:100, 66:14, 75:14. The method was successfully validated according to the International Conference on Harmonization (ICH) guidelines and piloted for ten commercial herbal medicines.