• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.173-178
• /
• 2004

The estimation of springing responses for recent ships are carried out and application to a ship design are described. To this aim, springing effects on hull girder were re-evaluated including non-linear wave excitations and torsional vibrations of the hull. The Timoshenko beam model was used to calculate stress distribution on the hull girder by the superposition method. The strip method was employed to calculate the hydrodynamic forces and moments on the hull. In order to remove the irregular frequencies, we adopted 'rigid lid' on the hull free surface level and added asymptotic interpolation along the high frequency range. Several applications to the existing ships were carried out. They are Bishop and Price's container ship, S-175 container ship, large container, VLCC and ore carrier. One of them is compared with ship measurement result while another with that of model test. Comparison between analytical solution and numerical one for homogeneous beam type artificial ship shows good agreement. It is found that most springing energy came from high frequency waves for the ships having low natural frequency and North Atlantic route etc. Therefore, the high frequency tail of the wave spectrum should be increased by $\omega^{-3}\;instead\;of\;\omega^{-4}\;or\;\omega^{-5}$ for springing calculation.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권5호
• /
• pp.467-472
• /
• 1997

In this study, we investigated the thickness dependence of thermal bleaching(TB) effect as well as photo-induced scalar phenomena, such as photodrakening(PD) effect and photorefraction(PR) change, in chalcogenide A $s_{40}$ G $e_{10}$S $e_{15}$ $S_{35}$ thin films. We found that when these films were exposed for 15 minutes using blue-pass filtered Hg lamp(~4300$\AA$) after annealing for 30 minutes around the glass transition temperature Tg(20$0^{\circ}C$), the refractive index change ($\Delta$n) was varied up to 0.02~0.46 according to each thickness condition and the optical energy gap ($\Delta$ $E_{op}$ ) was shifted to a longer wavelength of approximately 0.67eV, especially for 1000$\AA$-thickness. Also, the TB PD effects have been understood by the results related to optical absorption characteristics. The TB effect could be estimated as increasing the stabilization of amorphous chalcogenide films since absorption slope of extended regions(U) was not changed by annealing. On the other hand, the PD effect could be understood as due to the enhancement of disorder since U and the slope of Urbachs tail(1/F) around an absorption edge were decreased by exposing.ing.n edge were decreased by exposing.

• 대한전기학회논문지
• /
• 제45권2호
• /
• pp.289-293
• /
• 1996

The basic study on laser triggered lightning was carried out for the active protection of lightning in power transmission system. The lengths of generated plasma channels were simulated numerically for variations of energy and pulse width of CO$_{2}$ laser by Runge-Kutta-Gill method. As results, the effective lengths of plasma channels were 2.3m, 2.67m and 3.4m respectively for energy of 45J, 60J and 100J of CO$_{2}$ laser pulse with pulse width of 50nsec using focusing mirror with focal length of 10m. And also the effects of pulse width of first pulse and tail pulse of CO$_{2}$ laser on the length of plasma channel were examined.

• 한국환경생물학회:학술대회논문집
• /
• 한국환경생물학회 2003년도 학술대회
• /
• pp.68-73
• /
• 2003

The possibility of using the alkaline protocol of the single cell gel electrophoresis (SCGE) assay as a method for detecting induced DNA damage has been studied for six major plants. The EMS was applied as a model genotoxic agent on young excised leaves of the tested crops for 18 h at 26$^{\circ}C$ in the dark. With increasing concentrations of 0 to 10 mM EMS, the DNA damage, expressed by the averaged median tail moment values, significantly increased in nuclei of all plants studied. As the results, no correlation between the diameter of nuclei and sensitivity to EMS treatment was observed. The data obtained demonstrate the feasibility of using the SCGE assay for detecting induced DNA damage in plants.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제8권1호
• /
• pp.73-82
• /
• 2016

In order to extend the operational life of Underwater Moored Platforms (UMPs), a horizontal axis water turbine is designed to supply energy for the UMPs. The turbine, equipped with controllable blades, can be opened to generate power and charge the UMPs in moored state. Three-dimensional Computational Fluid Dynamics (CFD) simulations are performed to study the characteristics of power, thrust and the wake of the turbine. Particularly, the effect of the installation position of the turbine is considered. Simulations are based on the Reynolds Averaged Navier-Stokes (RANS) equations and the shear stress transport ${\kappa}-{\omega}$ turbulent model is utilized. The numerical method is validated using existing experimental data. The simulation results show that this turbine has a maximum power coefficient of 0.327 when the turbine is installed near the tail of the UMP. The flow structure near the blade and in the wake are also discussed.

• 한국생산제조학회지
• /
• 제19권2호
• /
• pp.235-240
• /
• 2010

The recent trend of vehicle design aims at crash safety and environmentally-friendly aspect. For the crash safety aspect, energy absorbing members should be absorbed with collision energy sufficiently. But vehicle structure must be light weight for the environmentally-friendly aspect, in order to improve fuel efficiency and to reduce tail gas emission. Therefore, the light weight of vehicle must be achieved in a status of securing safety of crash. An aluminum or CFRP (Carbon Fiber Reinforced Plastics) is representative one among the light-weight materials. In this study, impact collapse behavior of circular hybrid thin-walled member is evaluated. The hybrid members are manufactured by wrapping CFRP prepreg sheets outside the aluminum circular members in the autoclave. Because the CFRP is an anisotropic material whose mechanical properties change with its stacking condition, special attention is given to the effects of the stacking condition on the collapse behavior evaluation of the hybrid thin-walled member. Collapse mode and energy absorption capability of the hybrid thin-walled member are analyzed with change of the fiber orientation angle and interface number.

• Journal of Nutrition and Health
• /
• 제27권3호
• /
• pp.228-235
• /
• 1994

The purpose of this study was to investigate the effect of vitamin B6 deficiency on the concentration of energy metabolite in streptozotocin-induced diabetic rats. Thirty rats were fed a vitamin B6 deficient diet(-B6) or a control diet(+B6) for 5 weeks and then subdivided into 3 groups respectively ; base group, one day diabetic group and three day diabetic group. Diabetes of rats were induced by streptozotocin injection into the tail vein. Glucose, glycogen, protein, alanine, triglyceride and free fatty acids were compared in plasma, liver skeletal muscle of rats. Also, the total urinary nitrogen and glucose excretion were compared. Compared with +B6 rats, the increase of plasma glucose in -B6 rats due to the diabetes was smaller. After diabetes was induced, the level of plasma alamine was not changed in -B6 rats while increased significantly(p<0.05) in +B6 rats. The increase of urinary nitrogen excretion was smaller and the increase of muscle protein was larger in -B6 rats at the first day diabetes was induced. The levels of plasma free fatty acid and liver triglyceride were significantly (p<0.05) higher in -B6 rats after diabetes was induced. These results suggest that vitamin B6 deficiency may impair the adaptation of animals to the energy metabolism related due to a decrease of the body protein catabolism of fatty acid oxidation in diabetes and aggravate fatty liver which is one of the chronic complications of diabetes.

• Structural Engineering and Mechanics
• /
• 제77권1호
• /
• pp.103-114
• /
• 2021

Ultra high strength concrete (UHSC) originally proposed by Richards and Cheyrezy (1995) composed of cement, silica fume, quartz sand, quartz powder, steel fibers, superplasticizer etc. Later, other ingredients such as fly ash, GGBS, metakaoline, copper slag, fine aggregate of different sizes have been added to original UHSC. In the present investigation, the combined effect of coarse aggregate (6mm - 10mm) and steel fibers (0.50%, 1.0% and 1.5%) has been studied on UHSC mixes to evaluate mechanical and fracture properties. Compressive strength, split tensile strength and modulus of elasticity were determined for the three UHSC mixes. Size dependent fracture energy was evaluated by using RILEM work of fracture and size independent fracture energy was evaluated by using (i) RILEM work of fracture with tail correction to load - deflection plot (ii) boundary effect method. The constitutive relationship between the residual stress carrying capacity (σ) and the corresponding crack opening (w) has been constructed in an inverse manner based on the concept of a non-linear hinge from the load-crack mouth opening plots of notched three-point bend beams. It was found that (i) the size independent fracture energy obtained by using above two approaches yielded similar value and (ii) tensile stress increases with the increase of % of fibers. These two fracture properties will be very much useful for the analysis of cracked concrete structural components.

• Journal of Nutrition and Health
• /
• 제33권2호
• /
• pp.115-123
• /
• 2000

This study evaluates the effect of Dioscorea japonica Thunb subfractions on hyperglycemia and the composition of energy metabolites in diabetic rats. Diabetes emllitus was induced in male Sprague-Dawley rats by an injection of streptozotocin(STZ) dissolved in a citrate buffer into the tail vein at a dose of 45㎎/㎏ of body weight. Diabetic rats were assigned to 6 groups; STZ-control, subfraction A, B , C, D and E groups. All groups were fed an AIN-76 diet. The second butanol fraction of Dioscorea administered orally with carboxymethyl cellucose for 10 days after the STZ injection Body weight gain, diet intake and organ weights were monitored Levels of hematocrit, blood glucose, liver and muscle glycogen were measured. Levels of cholesterol, triglycerides and free fatty acids were also assayed. Body weight losses were observed by subfraction A group. Liver and kidney weights were not affected in any of the subgractioned groups. The decrease of blood glucose in daibetic rats which were fed Dioscorea japonica Thunb was significantly greater than the dicrease of blood glucose in the STZ-control group. cholesterol plasma level was not influenced in any subfraction of Dioscorea japonica Thunb. Liver triglyceride levels were significantly lowered in subfraction A compared with the STZ-control group. This study's results suggest that oral administration of subfraction C of Dioscorea japonica Thunb frction is capabl of reducing blood glucose, plasma triglyceride and free fatty acid levels, and therefore Dioscorea japonica Thunb may contain antihyperglycemic compounds.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.959-960
• /
• 2007

The wind power has been used steadily since long ago, but the importance of it has been faded because of the abundant and convenient fossil energy. Now, due to the energy crisis, experiencing the environmental problems etc, the necessity of using it growing bigger. Because the small wind turbines under a few kW grade has the merits of setting up with low costs by individuals, and get the energy saving effects that, it has the secured, separate markets from the range systems, and the developing of it is continuously proceeding. The small wind turbine system must have the output power regulating system for the over wind speed, to run steadily in the various wind speed environment. In case of the small wind turbine system, to prevent the breaking and for safety, at the over wind speed, additional system is required, and in most cases, output power is restricted by mechanical means. In this paper, the furling system makes the tail and the head move to make the blades to the wind in slanted angle, restrict the output power at the over wind speed. In thesis, small prototype wind turbine is made, and analyzing the output power characteristics at the over wind speed, and to verify, through the logical study and tests.