• 한국정밀공학회지
• /
• 제18권9호
• /
• pp.165-170
• /
• 2001

In normal grinding abrasive particles of a grinding wheel rotate on planes parallel to the direction of workpiece fred. which may induce continued scratch lines on ground surface as the workpiece feeds. Instead in helical scan grinding the planes make an angle, called a helical angle, with the feeding direction. Thus scratch lines produced by abrasive particles per one revolution are discontinued which implies that the generation of scratch lines are suppressed by the helical scan grinding. In this study some experimental works have been done on the helical scan grinding of glass to find the effects of grinding conditions on the surface roughness and estimate the optimal grinding conditions. The helical angle, fred rate, material removal rate and the wheel speed are taken as factors for three kinds of grinding wheels i.e., coarse(#140 mesh), medium(#400) and fine(#800) diamond wheels. The experiments are scheduled by Taguchi technique and ANOVA has been carried out for the interpretation of the results. As a result of this study effects of the factors are verified quantitatively showing that the major factors are changed according to the wheel's mesh size and the helical angle is one of the influencing factors on the surface quality.

• 한국가스학회지
• /
• 제15권6호
• /
• pp.57-62
• /
• 2011

본 연구에서는 70MPa의 충전압력을 갖는 130L 수소연료 저장탱크에 대한 최적설계를 유한요소법과 다구찌 설계법으로 고찰하였다. 6061-T6의 알루미늄 라이너의 외벽면에 T800-24K의 탄소섬유로 감아서 제조한 복합소재 연료탱크의 강도안전성을 미국 DOT-CFFC와 KS의 설계안전 규격을 기준으로 해석하였다. 70MPa용 수소가스탱크의 응력강도에 대한 FEM 해석결과에 의하면, US DOT-CFFC와 KS 규격에서 제시한 응력비 2.4의 기준값과 비교할 때 안전한 것으로 나타났다. 따라서, 다구찌 설계법에 기반한 최적설계 데이터는 설계모델 5번으로 선정할 수 있고, 여기서 제시할 수 있는 알루미늄 라이너의 두께는 6.4mm, 탄소섬유 적층에서 후프방향의 두께는 31mm, 헤리컬방향의 두께는 10.2mm이다.

• 한국자기학회지
• /
• 제24권5호
• /
• pp.160-164
• /
• 2014

본 논문에서는 설계변수의 불확실성을 고려한 BLDC 전동기의 코깅 토크 저감 설계를 수행하기 위하여 개선된 다구찌법을 이용한 효율적인 강건 최적설계 기법을 제안하였다. 일반적인 강건 최적설계 문제를 처리할 때 발생하는 기존 다구찌법의 단점을 해결하기 위하여, 벌칙함수와 최적수준 탐색기법이 새로이 도입되었다. 제안된 설계기법의 타당성을 검증하기 위하여 5 kW, 정격속도 2,300 rpm, 정격 토크 20 Nm의 전기자동차 구동용 BLDC 전동기의 코깅 토크 저감을 위한 강건 설계가 수행되었다. 또한 도출된 설계결과를 코깅 토크, 정격 토크 및 토크 리플에 대해 개념설계와 결정론적 최적설계 된 전동기들의 결과와 비교하였다.

• Corrosion Science and Technology
• /
• 제22권1호
• /
• pp.21-29
• /
• 2023

In this paper, a SiC nano electroless nickel plating layer with excellent corrosion resistance was fabricated using the Taguchi method. The electroless plated low carbon steel was subjected to tests to examine the influence of corrosive media, microhardness, and corrosion rate on the corrosion resistance of this alloy. Three different corrosive media (HCl, Na₂SO₄, and NaCl) at various temperatures (80, 90, and 100 ℃) were used, and at three different times (40, 80, and 120 min.) with a speed of stirring equal to 500 rpm. The results of microhardness were found from 134.276 HV to 278.578 HV at various conditions, while the corrosion rate results were obtained from 0.89643 mpy to 7.12571 mpy at different circumstances. Corrosion, and mechanical characteristics were explained using Taguchi design. Taguchi technique was used to account for all possible combinations of elements in order to conduct a complete study. Models that link the response and procedure parameters were developed using the results of these tests, and the analysis of variance was utilized to validate these models (ANOVA). For maximum efficiency, a function called "desirability" was applied to all responses at once.

• 한국자동차공학회논문집
• /
• 제17권2호
• /
• pp.165-170
• /
• 2009

Pressure ripple, vibration and noise level are measured in each parts of the power steering system. MD(Mahalanobis Distance) is calculated by using MTS(Mahalanobis Taguchi System) with measured data, and noise sensitive components are selected. The components applied detail design parameters are made and data is measured. After that MD is calculated also. Mean value and SN ratio can be obtained from the MD. Effective noise reduction technique and dominant design parameters in hydraulic power steering system are introduced.

• 소성∙가공
• /
• 제9권3호
• /
• pp.257-264
• /
• 2000

In this study, optimization for press forming condition of low arm was performed with explicit dynamic FEM code, Pam-Stamp. FEM simulation was coupled with the Taguchi's experiment technique having three design variables - friction coefficient, plastic anisotropy parameter, and blank shape - which are chosen to be optimized. The simulation results were compared with those of experiment. We found out the change of blank shape among these three design variables is very effective in optimizing press forming condition of low arm. In addition, the modified blank shape shows high yield of slitting coil.

• Carbon letters
• /
• 제12권1호
• /
• pp.39-43
• /
• 2011

Synthesis of carbon fibers from cotton fiber by pyrolysis process has been described. Synthesis parameters are optimized using Taguchi optimization technique. Synthesized carbon fibers are used for studying hydrogen adsorption capacity using Seivert's apparatus. Transmission electron microscopy analysis and X-ray diffraction of carbon fiber from cotton suggested it to be very transparent type material possessing graphitic nature. Carbon synthesized from cotton fibers under the conditions predicted by Taguchi optimization methodology (no treatment of cotton fiber prior to pyrolysis, temperature of pyrolysis $800^{\circ}C$, Argon as carrier gas and paralyzing time for 2 h) exhibited 7.32 wt% hydrogen adsorption capacity.

• 품질경영학회지
• /
• 제23권2호
• /
• pp.28-42
• /
• 1995

For quality improvement, Taguchi emphasizes the reduction of variation of the quality characteristic, Taguchi has used the signal-to-noise ratios for achieving minimum dispersion of the quality characteristic with its location adjusted to some desired target value ${\tau}$ Lim(1994) proposes a reasonable SN ratio based on a linking relationship of the variance and mean through simple data analysis technique. In this paper we investigate the efficiency of those two SN ratios and variance stabilizing transformations through Monte Carlo Simulations.

• 한국기계가공학회지
• /
• 제7권4호
• /
• pp.149-154
• /
• 2008

The concept of robust design was introduced by Dr. G. Taguchi in the late 1940s, and his technique has become commonly known as the Taguchi method or the robust design. In this research, a robust design procedure for microgyroscope is suggested based on the kriging and optimization approaches. The kriging interpolation method is introduced to obtain the surrogate approximation model of true function. Robustness is calculated by the kriging model to reduce real function calculations. For this, objective function is represented by the probability of success, thus facilitating robust optimization. The statistics such as mean and variance are obtained based on the reliable kriging model and the second-order statistical approximation method.

• 대한기계학회논문집A
• /
• 제21권12호
• /
• pp.2073-2080
• /
• 1997

Recently, the plane strain puch stretching test(called PSST) has been developed and used successfully in the evaluation of the press formability of automotive steel sheets. In this paper, the optimum punch geometry of the original PSST tool was investigated by the FEM analysis. The puch length, crown and corner radius are chosen to be optimized according to the Taguchi's experiment technique with the $L_4$ orthogonal array.