• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.6
• /
• pp.1055-1059
• /
• 2004

A RFID(Radio Frequency Identification) system is a kind of radio frequency communication system and a branch of automatic data collection system. RFID system consists of RFID tags(or transponders) and RFID readers(controllers). This paper deals with the wireless communication that acquires tag IDs through RFID readers, and show the implementation of the target system which transmits tag IDs and related information to the server on the Internet through the wireless local area network. Today's RFID systems are usually implemented with the wired communication environment. In this paper, however, RFID system is effectively realized with the widely deployed wireless local area network and various RFID data can be collected by the readers which are communicating with the wireless access points of the local area network. Through the Internet, users also can have easy access to the server on the web and retrieve, analyze, and utilize tags' information.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.4
• /
• pp.1005-1014
• /
• 2010

When reader collect tags, we found that they tend to get together to specific interface in Multi-Interface Multi-Channel 2.4GHz Active RFID system. To solve this problem, we designed the LP-Combind and AP-Balanced protocol for load distribution between interfaces, then verified its superiority of the performance through the simulation. There are three problems to implement designed protocols in hardware of firmware-level. first, tag selects randomly the channel of reader and reader need the method which can change the channel of tags. second, reader has the synchronization problem between reader and tag. third, reader has problem that MCU of reader have to operate simultaneously dual interface. To slove this problems, we designed the message and implemented method for tag channel change and the protocol in order to adjust synchronization between reader and tag, Therefore, we compared and analyzed the performance of protocols by experiment. If LP windows size is same, the performance of LP-Combined protocol and AP-Balanced protocol which lower collision probability by its load distribution is more outstanding than single interface protocol performance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.4
• /
• pp.976-982
• /
• 2010

Agricultural products are one of the major food, But in recent years, It's not easy for Consumers to buy them. Cause there are not sure about the quality of the cheap foreign agricultural product imported. There are not even sure where they have been produced, Some excessive use of domestic pesticides, And Environmental pollution caused by soil contamination of plantation, It's not only matter with the conscience of the Sellers and producers. The government recommends agricultural producers to attach the mark to identify where the products are made originally. However, if producers do not comply with the recommendation, it become useless. Recently, because of the increased interest to health and food, Consumers want accurate and reliable information about The agricultural products, They buy. In this paper, Based on the RFID technology, RFID tags attached to agricultural products when consumers buy, Through the RFID reader to read RFID tags, Which make Easy to accurately convey Production of agricultural information and safety information to consumers. These features have been implemented with the traceability system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.8B
• /
• pp.822-829
• /
• 2009

A reader protocol is an interface between a host and RFID readers. There are several standards for reader protocol such as EPCglobal Low Level Reader Protocol (LLRP) 1.0.1, EPCglobal Reader Protocol (RP) 1.1, and ISO/IEC 15961/15962. Unfortunately, these standards focus on the passive RFID system, and so they are not appropriate for the active RFID system. In this paper, we implemented an efficient reader protocol for the active RFID system, which is based on EPCglobal LLRP 1.0.1, but smoothing/filtering functions of EPCglobal RP 1.1 are added. This protocol is designed to configure air interface parameters for active RFID readers and tags. It can reduce the amount of data transfer between the reader and host by filtering function, and can improve the performance of tag collection by smoothing function. In addition, it can remove inefficiency caused by tag memory data change according to the standards of ISO/IEC 15961/15962. In the real-world environment, we evaluated the performance of our implemented reader protocol using one RFID reader and 45 tags.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.2
• /
• pp.107-116
• /
• 2013

In this paper, we propose a hybrid music recommendation system combining users' listening habits and tag information in a social music site. Most of commercial music recommendation systems recommend music items based on the number of plays and explicit ratings of a song. However, the approach has some difficulties in recommending new items with only a few ratings or recommending items to new users with little information. To resolve the problem, we use tag information which is generated by collaborative tagging. According to the meaning of tags, a weighted value is assigned as the score of a tag of an music item. By combining the score of tags and the number of plays, user profiles are created and collaborative filtering algorithm is executed. For performance evaluation, precision, recall, and F-measure are calculated using the listening habit-based recommendation, the tag score-based recommendation, and the hybrid recommendation, respectively. Our experiments show that the hybrid recommendation system outperforms the other two approaches.

• Journal of Digital Convergence
• /
• v.17 no.12
• /
• pp.211-217
• /
• 2019

Location positioning systems are available in applications such as mobile, robotic tracking systems and Wireless location-based service (LBS) applications. The GPS system is the most well-known location tracking system, but it is not easy to use indoors. The method of radio frequency identification (RFID) location tracking was studied in terms of cost-effectiveness for indoor location tracking systems. Most RFID systems use active RFID tags using expendable batteries, but in this paper, an inexpensive indoor location tracking system using passive RFID tags has been developed. A pattern matching method and a system for tracing location by generating regression curves were studied to use precision tracking algorithms. The system was tested by verifying the level of error caused by noise. The three-dimensional curves are produced by the regression equation estimated the statistically meaningful coordinates by the differential equation. The proposed system could also be applied to mobile robot systems, AGVs and mobile phone LBSs.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.10
• /
• pp.1-6
• /
• 2007

Wireless Self-Powered Temperature Sensor for UHF Sensor Tags which are basic device for construction of ubiquitous sensor network is proposed. The key parameters of the target specification are resolution of $0.1\;^{\circ}C$ per output bit, below 1.5 V of operating voltage and below 5 uW of power consumption during sensing operation. Temperature sensor circuit consists of PTAT current generator, band gap reference circuit generating both reference voltage and current, Sigma-Delta Converter, and Digital Counter. Simulated maximum resolution was $0.23\;^{\circ}C/bit$ in 11-bit output. The proposed temperature sensor was fabricated by using a 0.25 m CMOS process. The chip area is $0.32\;{\times}\;0.22\;mm$ and the operating frequency is 2 MHz. Measured resolution from fabricated temperature sensor was $4\;^{\circ}C/bit$ in 8-bit output for the temperature range from $10^{\circ}C$ to $80^{\circ}C$.

• Journal of IKEEE
• /
• v.14 no.2
• /
• pp.24-32
• /
• 2010

Slotted-ALOHA and Binary-tree method are researched for the anti-collision for RFID system. However, it is required of the rapid recognition time for all tags and the reduction of the system complexity. In this paper. the hybrid anti-collision method is proposed to solve the problems. The RFID reader with the hybrid anti-collision method groups the tags with the number which makes the maximum system throughput, then it reads each group by slotted-ALOHA method. By the computer simulation results, it is found that the hybrid method improves the tag identification time and the system throughput together with the comparison to other anti-collision methods. Therefore, the proposed hybrid anti-collision method will enhance the RFID system performance.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.1
• /
• pp.217-224
• /
• 2012

Location-Based Services(LBS) is a service that provide location information by using communication network or satellite signal. In order to provide LBS precisely and efficiently, we studied how we can reduce the error on location determination of objects such people and things. We focus on using the least square method and triangulation positioning method to improves the accuracy of the existing location determination method. Above two methods is useful if the distance between the AP and the tags can be find. Though there are a variety of ways to find the distance between the AP and tags, least squares and triangulation positioning method are wildely used. In this thesis, positioning method is composed of preprocessing and calculation of location coordinate and detail of methodology in each stage is explained. The distance between tag and AP is adjusted in the preprocessing stage then we utilize least square method and triangulation positioning method to calculate tag coordinate. In order to confirm the performance of suggested method, we developed the test program for location determination with Labview2010. According to test result, triangulation positioning method showed up loss error than least square method by 38% and also error reduction was obtained through adjustment process and filtering process. It is necessary to study how to reduce error by using additional filtering method and sensor addition in the future and also how to improve the accuracy of location determination at the boundary location between indoor and outdoor and mobile tag.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.11A
• /
• pp.1130-1137
• /
• 2006

One of the important performance issues in large-scale RFID systems is to resolve collisions among responses from RFID tags. Considering two do facto anti-collision solutions, namely the binary-tree splitting algorithm and the Slotted-Aloha algorithm, we propose to use multi-packet reception (MPR) capability to enhance the RFID tag reading rate (i.e., throughput). MPR allows an RFID reader to receive multiple reponses transmitted by tags at the same time. We analyze the effect of MPR capability in the above anti-collision algorithms, which is also validated by simulation. The analysis and simulation results show that RFID reader antenna design and signal separation techniques play an important role in improving RFID system performance with MPR capability.