• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.10
• /
• pp.1491-1497
• /
• 2013

Radio frequency identification (RFID) is an important and essential components of ubiquitous computing, with the development of wireless communication technologies and mobile computing environment. Recently, RFID becomes the mainstream application that helps fast handling and uniquely identifying the physical objects. It utilizes the electromagnetic energy for data transmission from a tag to a reader in the presence of arbitrary interference and noise. In order to employ the portable mobile RFID reader, a tag-collision problem between two or more adjacent tags should be considered. In this paper, we present the operation of RFID system in which numerous tags are present in the interrogation zone of a single reader at the same time. Since there may exist a number of tagged objects in the narrow area, multiple RFID tags may interfere each other, caused to degrade the data reliability and efficiency of the RFID system. In order to suppress interference signals from multiple neighboring tags, we present an application of Gold code for RFID communication system, which uses spread spectrum technique. In this RFID system, data bits are spreaded in each tags with the unique Gold code and the spreaded data bits are despreaded in the reader with the same Gold code. The performance analysis of the considered RFID anti-collision system is illustrated via computer simulation examples.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.12
• /
• pp.2366-2373
• /
• 2007

In this paper, a low-power and small-area asynchronous 1 kilobit EEPROM for passive UHF RFID tag chips is designed with $0.18{\mu}m$ EEPROM cells. As small area solutions, command and address buffers are removed since we design asynchronous I/O interface and data output buffer is also removed by using separate I/O. To supply stably high voltages VPP and VPPL used in the cell array from low voltage VDD, Dickson charge pump is designed with schottky diodes instead of a PN junction diodes. On that account, we can decrease the number of stages of the charge pump, which can decrease layout area of charge pump. As a low-power solution, we can reduce write current by using the proposed VPPL power switching circuit which selects each needed voltage at either program or write mode. A test chip of asynchronous 1 kilobit EEPROM is fabricated, and its layout area is $554.8{\times}306.9{\mu}m2$., 11% smaller than its synchronous counterpart.

• Journal of the Korea Convergence Society
• /
• v.13 no.4
• /
• pp.359-372
• /
• 2022

This study aimed to derive a YouTube content strategy that can be exposed to Trending for a long time by comparing the features of 20 channels in the short/long term using 'YouTube Trending' data in 2021. First, through Pearson's correlation analysis, we found that various factors such as 'the number of title or tag letters' related to long-term exposure, and set this as an index to compare features. As a result, 1)'video title' of about 40-45 letters without excessive special characters, 2)'video length' within 10 minutes, 3)'Video description' is effective when writing 2-3 sentences and adding SNS information or including 3 key tags. Also, it would be more effective if you set key tag pairs such as (먹방, mukbang), (역대급, 레전드) derived through text mining. Through this, the channel will spread globally, bringing various advantages, and will be used as an indicator to evaluate the globality of the channel.

• KIPS Transactions on Software and Data Engineering
• /
• v.12 no.10
• /
• pp.455-460
• /
• 2023

Text augmentation is a methodology that creates new augmented texts by transforming or generating original texts for the purpose of improving the performance of NLP models. However existing text augmentation techniques have limitations such as lack of expressive diversity semantic distortion and limited number of augmented texts. Recently text augmentation using large language models and few-shot learning can overcome these limitations but there is also a risk of noise generation due to incorrect generation. In this paper, we propose a text augmentation method called TAGS that generates multiple candidate texts and selects the appropriate text as the augmented text. TAGS generates various expressions using few-shot learning while effectively selecting suitable data even with a small amount of original text by using contrastive learning and similarity comparison. We applied this method to task-oriented chatbot data and achieved more than sixty times quantitative improvement. We also analyzed the generated texts to confirm that they produced semantically and expressively diverse texts compared to the original texts. Moreover, we trained and evaluated a classification model using the augmented texts and showed that it improved the performance by more than 0.1915, confirming that it helps to improve the actual model performance.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.9
• /
• pp.1345-1354
• /
• 2014

Copy number variations (CNVs), important genetic factors for study of human diseases, may have as large of an effect on phenotype as do single nucleotide polymorphisms. Indeed, it is widely accepted that CNVs are associated with differential disease susceptibility. However, the relationships between CNVs and gene expression have not been characterized in the horse. In this study, we investigated the effects of copy number deletion in the blood and muscle transcriptomes of Thoroughbred racing horses. We identified a total of 1,246 CNVs of deletion polymorphisms using DNA re-sequencing data from 18 Thoroughbred racing horses. To discover the tendencies between CNV status and gene expression levels, we extracted CNVs of four Thoroughbred racing horses of which RNA sequencing was available. We found that 252 pairs of CNVs and genes were associated in the four horse samples. We did not observe a clear and consistent relationship between the deletion status of CNVs and gene expression levels before and after exercise in blood and muscle. However, we found some pairs of CNVs and associated genes that indicated relationships with gene expression levels: a positive relationship with genes responsible for membrane structure or cytoskeleton and a negative relationship with genes involved in disease. This study will lead to conceptual advances in understanding the relationship between CNVs and global gene expression in the horse.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.1
• /
• pp.5-10
• /
• 2005

This experiment was conducted to clarify the functions of supernodulating characters on seed yield determination through the comparison of agricultural traits of supernodulating soybean mutants, Sakukei4, SS2-2, and their parent cultivars, Enrei and Shinpaldalkong2. The plant dry weights of supernodulating mutants, Sakukei4 and SS2-2, were $52\%$ and $61\%$ of their wild type parents at full seed stage (R6). However, the relative growth rate (RGR) from the pod set stage (R3) to R6 of Sakukei4 was 0.022 g/g/day and that of SS2-2 was 0.016 g/g/day, which were higher than those of their parents. Nodule number and dry weight were increased in two supernodulating mutants by the R6 stage. The nitrogen concentrations of leaf, petiole and stem of Sakukei4 were higher than those of Enrei. SS2-2 showed higher nitrogen concentration in petiole than Shinpaldalkong2 had. The positive correlations were appeared between nodule dry weight, plant dry weight and pod number, in two supernodulating mutants during the period from R3 to R6 stage. Although all of the yield components and seed yield were lower in two supernodulating mutants than their parents at the stage of full maturity (R8), the harvest index was higher in supernodulating mutants. The increasing rates of pod number to stem dry weight in two supernodulating mutants showed the higher than those of two their parents at R8 stage. In conclusion, the relative growth rates during the early to the middle reproductive growth period were higher in supernodulating mutants than the wild types. This could be resulted in an increase in pod number. The increase of relative growth rate was the result of the successive supplement of nitrogen source from biological nitrogen fixation (BNF) of nodules during the middle reproductive growth period in supernodulating mutants.

• Korean journal of applied entomology
• /
• v.49 no.4
• /
• pp.357-362
• /
• 2010

Soybean seed injury was analyzed in the experiments in which the bean bug, Riptortus pedestris(Hemiptera: Alydidae), was released into screen-caged pots containing full seed stage(R6) of soybean. When the different stages of insects, from the 3rd instar nymphs to adults, were released into pots during 8 days in soybean R6 stage, soybean seeds with injury marks (B-type seeds) increased. The weight reduction ratio in B-type seeds was highest in the injury by the 5th instar nymphs, while the daily-produced number ratio of B-type seeds was small in the treatment. In the injury by the different number of adult released into pots, 4, 8, 16 adults caused a significant increase of B-type seeds, while 16 adults caused the significant increase of the deformed (C-type) seeds. In the injury by the different release period of adults, the total number of pods was not significantly different among treatments, while the total seed number harvested was significantly small in the release for 48 days. The release for 8 and 16 days caused a significant increase of B-type seeds, while the release for 48 days caused the increase of C-type seeds. The results indicated that injury of soybean R6 stage by the bean bug produced soybean seeds with distinct injury marks at relatively low density and during short term attack period, while it produced deformed seeds at high density and during long attack period.

• Horticultural Science & Technology
• /
• v.28 no.3
• /
• pp.442-448
• /
• 2010

The objectives of this study were to analyze mutant lines of Chinese cabbage ($Brassica$ $rapa$ ssp. $pekinensis$) using gene tagging system (plasmid rescue and inverse polymerase chain reaction) and to observe the phenotypic characteristics. Insertional mutants were derived by transferring DNA (T-DNA) of $Agrobacterium$ for functional genomics study in Chinese cabbage. The hypocotyls of Chinese cabbage 'Seoul' were used to obtain transgenic plants with $Agrobacterium$ $tumefaciens$ harboring pRCV2 vector. To tag T-DNA from the Chinese cabbage genomic DNA, plasmid rescue and inverse PCR were applied for multiple copies and single copy insertional mutants. These techniques were successfully conducted to Chinese cabbage plant with high efficiency, and as a result, T-DNA of pRCV2 vector showed distinct various integration patterns in the transgenic plant genome. The polyploidy level analysis showed the change in phenotypic characteristics of 13 mutant lines was not due to variation in somatic chromosome number. Compared with wild type, the $T_1$ progenies showed varied phenotypes, such as decreased stamen numbers, larger or smaller flowers, upright growth habit, hairless leaves, chlorosis symptoms, narrow leaves, and deeply serrated leaves. The polyploidy level analysis showed the change in phenotypic characteristics of 13 mutant lines was not due to variation in somatic chromosome number. To tag T-DNA from the Chinese cabbage genomic DNA, plasmid rescue and inverse PCR were applied for multiple copies and single copy insertional mutants. Mutants that showed distinct phenotypic difference compared to wild type with 1 copy of T-DNA by Southern blot analysis, and with 2n = 20 of chromosome number were selected. These selected mutant lines were sequenced flanking DNA, mapped genomic loci, and the genome information of the lines is being recorded in specially developed database.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.1
• /
• pp.66-78
• /
• 2004

The objective of this study was to apply the vibration technique to reduce the viscosity of bonding adhesives and thereby compare the bond strength and resin penetration in enamel and dentin achieved with those gained using the conventional technique and vibration technique. For enamel specimens, thirty teeth were sectioned mesio-distally. Sectioned two parts were assigned to same adhesive system but different treatment(vibration vs. non-vibration). Each specimen was embedded in 1-inch inner diameter PVC pipe with a acrylic resin. The buccal and lingual surfaces were placed so that the tooth and the embedding medium were at the same level. The samples were subsequently polished silicon carbide abrasive papers. Each adhesive system was applied according to its manufacture's instruction. Vibration groups were additionally vibrated for 15 seconds before curing. For dentin specimen, except removing the coronal part and placing occlusal surface at the mold level, the remaining procedures were same as enamel specimen. Resin composite(Z250. 3M. U.S.A.) was condensed on to the prepared surface in two increments using a mold kit(Ultradent Inc., U.S.A.). Each increments was light cured for 40 seconds. After 24 hours in tap water at room temperature, the specimens were thermocycled for 1000cycles. Shear bond strengths were measured with a universal testing machine(Instron 4465, England). To investigate infiltration patterns of adhesive materials, the surface of specimens was examined with scanning electron microscope. The results were as follows: 1. In enamel the mean values of shear bond strengths in vibration groups(group 2, 4, 6) were greater than those of non-vibration group(group 1, 3, 5). The differences were statistically significant except AQ bond group. 2. In dentin, the mean values of shear bond strengths in vibration groups(group 2, 4, 6) were greater than those of non-vibration groups(group 1, 3, 5). But the differences were not statistically significant except One-Up Bond F group. 3. The vibration group showed more mineral loss in enamel and longer resin tag and greater number of lateral branches in dentin under SEM examination.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.141-146
• /
• 2018

Recently, location recognition technology has attracted much attention, especially for locating people or objects in an indoor environment without being influenced by the surrounding environment GPS technology is widely used as a method of recognizing the position of an object or a person. GPS is a very efficient, but it does not allow the positions of objects or people indoors to be determined. RFID is a technology that identifies the location information of a tagged object or person using radio frequency information. In this study, an RFID system is constructed and the position is measured using tags. At this time, an error occurs between the actual and measured positions. To overcome this problem, a neural network is trained using the measured and actual position data to reduce the error. In this case, since the number of read tags is not constant, they are not suitable as input values for training the neural network, so the neural network is trained by converting them into center-of-gravity inputs and median value inputs. This allows the position error to be reduce by the neural network. In addition, different numbers of trained data are used, viz. 50, 100, 200 and 300, and the correlation between the number of data input values and the error is checked. When the training is performed using the neural network, the errors of the center-of-gravity input and median value input are compared. It was found that the greater the number of trained data, the lower the error, and that the error is lower when the median value input is used than when the center-of-gravity input is used.