• Textile Coloration and Finishing
• /
• v.15 no.4
• /
• pp.73-79
• /
• 2003

It is generally known that cotton treated with liquid ammonia has better soft handle, wrinkle recoveries and stability of appearance as compared with the alkali mercerized cotton. In this study, the various cotton fabrics treated with liquid ammonia$(NH_3)$, sodium hydroxide(NaOH) and sodium hydroxide(NaOH)/liquid ammonia$(NH_3)$ and untreated cotton fabric were investigated and compared in terms of physical properties and dyeing behavior. As the result, the strength of four kinds of cotton fabrics were similar. But the elongation of cotton treated with liquid ammonia increased slightly. Liquid ammonia treatment reduced the crystallinity of cotton and the crystalline structure of cotton transformed from cellulose 1 to mixed structure of celluloseIand III. In dyeing, dyeing rate decreased but equilibrium dye uptake increased by liquid ammonia treatment of cotton fabrics.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2009.09a
• /
• pp.93-96
• /
• 2009

Foundation structure for the main engine heavy spare parts in the engine room is susceptible to resonance problem due to outfitting weight. In addition the deck floor has a large opening for the main engine installation and maintenance, which further weakens the foundation structure. To reinforce the weak structure, two types of approaches have been used; 1) insert an H-pillar below or above the floor and 2) increase the stiffener size. In this paper, the H-pillar approach is used to solve the vibration problem of the foundation structure in the engine room opening area. A commercial program is used to analyze the vibration problem ad to find the location and the size of the H-pillar. Modal test at the quay and on-board vibration measurement during the sea trial have confirmed the validity of inserting an H-pillar below the floor.

• The Journal of the Korean bone and joint tumor society
• /
• v.1 no.1
• /
• pp.17-22
• /
• 1995

From Sept. 1986 to Dec. 1992, seventy three cases of Enneking's stage IIB osteosarcoma of extremities, which were proved histologically, took neoadjuvant chemotherapy and completed our protocol. Their average age was 16.7 years(7 to 57). For neoadjuvant chemotherapy, 37 cases took high dose methotrexate(HDMTX)-adriamycin(ADR)-cisplatin(CDDP) regimen(HDMTX group) and 36 cases took ADR-CDDP(ADR-CDDP group). The average follow up was 17 months(2-63). According to Kaplan-Meier's plot, 5-year continuously disease free survival for whole 73 cases of neoadjuvant group was 45.2%, for HDMTX group 68.4%, for ADR-CDDP group 26.6%. There was significant stastical difference between these two groups(p<0.001), with log-rank test. There can be a different survival according to the chemotherapeutic protocols. Better results can be achieved through refined protocol and effective chemotherapeutic agents.

• Journal of the Korean Institute of Educational Facilities
• /
• v.8 no.3
• /
• pp.7-14
• /
• 2001

To obtain basic data used for establishing the criteria of deterioration in renovation of educational facilities, current problems of material and method and quality improvements were examined. In this study, the elementary schools built 20 and 70 years ago were unintentionally chosen and studied. With the data of the repair of old educational facilities, the results are as follows. The First problem is that the construction priority which was based on non-experts decision. The Second problem is that maintenance method which changes the materials after their life was ended. So, refer to remodeling of educational facilities, the selections of proper materials and methods to use of each function were main object in this study.

• Nuclear Engineering and Technology
• /
• v.38 no.5
• /
• pp.449-454
• /
• 2006

Neutron imaging technique was used to investigate the water distribution and movement in Polymer Electrolyte Membrane Fuel Cell (PEMFC) at HANARO, KAERI. The Feasibility tests were performed in the first and second exposure rooms at the neutron radiography facility (NRF) at HANARO in order to check the ability of each exposure room, respectively. The feasibility test apparatus was composed of water and pressurized air before making up the actual test apparatus. Due to the low neutron intensity in the second exposure room, the exposure time was too long to investigate the transient phenomena of PEMFC. Although the exposure time was improved to 0.1 sec in the first exposure room, it was difficult to discriminate detail water movement at the channel due to the high noise level. Therefore, the experimental setup must be optimized according to the test conditions. Water discharge characteristics were investigated under different flow field geometries by using feasibility test apparatus and the neutron imaging technique. The water discharge characteristics of a 3-parallel serpentine are superior to those of a 1-parallel serpentine, but water at Membrane Electrode Assembly (MEA) was not removed, regardless of the flow field type.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.10
• /
• pp.1444-1450
• /
• 2013

Esophageal stethoscope is used for monitoring the heart sounds and breath sounds of patients during surgery under a general anesthesia. Recently, an electronic esophageal stethoscope (EES)[1] has been developed for the purpose of real-time monitoring these information visually. This system uses only a microphone as the sound sensor. A drawback of the EES system is that it may be difficult to distinguish the first sound ($S_1$) and the second sound ($S_2$) of heart, because their periods are irregular depending on patients. In this paper, we propose an improved EES system in which the infrasound is measured by adding a pressure sensor as well as a sound sensor. We investigate some correlations between the infrasound and characteristics of the heart sound. The proposed system has been tested on 15 patients. The results show that the new system is capable of detecting the first sound more reliably and easily determining the heart rate and breathing period.

• Journal of Korea Multimedia Society
• /
• v.23 no.6
• /
• pp.747-755
• /
• 2020

In this paper, we deal with outlier data problems that occur when constructing a PM_2.5 fine dust forecasting system using a neural network. In general, when learning a neural network, some of the data are not helpful for learning, but rather disturbing. Those are called outlier data. When they are included in the training data, various problems such as overfitting occur. In building a PM_2.5 fine dust concentration forecasting system using neural network, we have found several outlier data in the training data. We, therefore, remove them, and then make learning 3 ways. Over_outlier model removes outlier data that target concentration is low, but the model forecast is high. Under_outlier model removes outliers data that target concentration is high, but the model forecast is low. All_outlier model removes both Over_outlier and Under_outlier data. We compare 3 models with a conventional outlier removal model and non-removal model. Our outlier removal model shows better performance than the others.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.997-1002
• /
• 2007

A guideway vehicle is used in automobile, semiconductor and LCD manufacturing industries to transport products efficiently. Since the operating speed of the guideway vehicle should be increased for maximum productivity, the weight of the vehicle has to be reduced. This may cause parts in the system to fail before the life of the system. Therefore estimation of the fatigue life of the parts becomes an important problem. In this study, the fatigue life of the driving wheel in the guideway vehicle is estimated using a S-N curve. To obtain the fatigue life of a part, the S-N curve, load time history applied on a driving wheel and material property are required. The S-N curve of the driving wheel is obtained using the fatigue experiment on wheels. Load time history of the wheel is obtained from multibody dynamics analysis. To obtain the material properties of the driving wheel, which is composed of aluminum with urethane coating, a compression hardware testing has been done with the static analysis of the FE model. The fatigue life prediction using computational analysis model guarantees the safety of the vehicle at the design stage of the product.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.4
• /
• pp.140-147
• /
• 2004

In reverse engineering, the whole surfaces of the three-dimensional product are measured using 3D positional scanners. The raw triangle meshes constructed from a scanned point set are not well fitted for direct use in the downstream engineering or graphic activities. No object can be fully described by a single scan. Although multiple scans are usually taken and aligned to achieve a complete model, a set of scanned points does not entirely wrap the whole object. This is because some surfaces may be inaccessible to the scanner, so some portion of the scanned surface may be missing. This paper discusses the algorithms of a hole-filling that are crucial to refine the triangle meshes. In this paper, the holes are filled with flat triangles first by subdivision operation and then smoothed with neighboring triangles. This process continues until it converges to a certain user-defined iteration number. Examples are given and discussed to validate the system.

• Korean Journal of Pharmacognosy
• /
• v.38 no.3 s.150
• /
• pp.296-298
• /
• 2007

Two lignan glycoside compounds were isolated from the twigs of Vaccinium oldhami (Ericaceae) through repeated column chromatography. Their chemical structures were elucidated as lyoniside and ssioriside, respectively, by spectroscopic analysis.