• Journal of Chest Surgery
• /
• v.16 no.2
• /
• pp.157-163
• /
• 1983

Ebstein's anomaly is a rare congenital cardiac malformation oand the ideal surgical correction seems controversial at present, and some problems are left unsolved in the surgical correction of this anomaly. Between June 1978 and June 1982, 12 patients with Ebsteins' anomaly underwent corrective open heart surgery at Seoul National University Hospital. Except for one patient, who had no ASD, all had a huge right atrium, secundum type ASD, and definite atrialized right ventricle. Typically, displaced tricuspid valve leaflets were found in all cases, but the degree of displacement and deformity were variable. In the point of NYHA functional classification, five were in class II, six were in class III, and one was in class IV. Ten patients were operated on by tricuspid valve replacement and pication. Two patients were operated on only by plication and annuloplasty techniques, and in all cases, ASD was closed. Postoperatively, four patients suffered from complete A-V block, and two of them died immediately. The remaining two patients took pacemaker generator implantation with good results. The other eight patients were in good condition. Tricuspid valve replacement using tissue valve and plication of the atrialized rght ventricle seems to be a good method of surgical correction for Ebstein's anomaly.

• Korean Journal of Materials Research
• /
• v.25 no.11
• /
• pp.616-621
• /
• 2015

Atmospheric pressure plasma is used in the biological and medical fields. Miniaturization and safety are important in the application of apply atmospheric plasma to bio devices. In this study, we made a small, pocket-sized inverter for the discharge of atmospheric plasma. We used pulse power to control the neutral gas temperature at which the, when plasma was discharged. We used direct current of 5 V of bias(voltage). The output voltage is about 1 to 2 kilo volts the frequency is about 80 kilo hertz. We analyzsed the characteristics of the atmospheric plasma using OES(Optical emission spectroscopy) and the Current-Voltage characteristic of pulse power. By calculating of the current voltage characteristics, we were able to determine that, when the duty ratio increased, the power that actually effects the plasma discharge also increased. To apply atmospheric plasma to human organisms, the temperature is the most important factor, we were able to control the temperature by modulating the pulse power duty ratio. This means we can use atmospheric plasma on the human body or in other areas of the medical field.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.52 no.3
• /
• pp.249-258
• /
• 2007

Experiments were conducted with aims to (1) estimate the biomass yield potential, (2) characterize the biomass and digestible dry matter production, and (3) reveal the characteristic seedling establishment of a whole crop rice variety, Nogyangbyeo, in dry- and wet-seeded rice. Maximum aboveground total biomass of Nogyangbyeo was 18 t $ha^{-1}$ in dry-seeded rice and 20 t $ha^{-1}$ in wet-seeded rice. Biomass yield potential of Nogyangbyeo was lower than that of Dasanbyeo. Comparatively, Nogyangbyeo was straw-dependent and Dasanbyeo was grain-dependent for biomass accumulation. Percentage of digestible dry matter (DDM) was higher in panicles than straw. Digestible dry matter yield was determined mainly by biomass yield rather than DDM percentage. Number of seedling establishment in Nogyangbyeo was $73m^{-2}$ in dry-seeded rice and $109m^{-2}$ in wet-seeded rice. Poor seedling establishment of dry-seeded Nogyangbyeo in the field condition was the result of low seed germination under low temperature and poor seedling emergence by deep sowing. Low seedling emergence rate of Nogyangbyeo was attributed mainly to slow elongation growth by slow leaf development and partly to mesocotyl and 1st internode lengths, not to genetically defined leaf length. The slow elongation growth of Nogyangbyeo was the same even in the high daily mean temperature of $24^{\circ}C$. Results suggest DDM yield in rice can be improved simply by increasing biomass and whole crop rice varieties should be adaptable to direct-seeding.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.3
• /
• pp.113-121
• /
• 2015

Building using masonry accounts for most of the smaller houses in Korea but due to brittle behavior and low ductility the frequency of usage has decreased in recent years. Despite this, this form of building has been gaining attention overseas for its low cost in construction and environment-friendliness of the materials. As such, many studies are being conducted to resolve the disadvantages in structure. This study produced an specimen for masonry-filled wall and the intersection to confirm the difference in structural movement depends on the existence or lack of expansion joint and verified the reinforcement effect from inserting a connecting steel item (steel plate, stainless steel twist bar). The experiment results show that the specimen with a steel plate inserted saw an increase in durability and an improvement in the strength of the specimens, while the specimen that had stainless steel twists bar inserted saw an increase in ductility that did not cause brittle failure, indicating that the reinforcement effects of inserting a connecting steel item are effective.

• Progress in Superconductivity and Cryogenics
• /
• v.14 no.3
• /
• pp.1-4
• /
• 2012

Effects of artificial holes on the cooling efficiency of single grain YBCO bulk superconductors were studied. Single grain YBCO bulk superconductors without artificial holes, with six 2.4 mm holes and six holes filled with Bi-Pb-Cd-Sn metal solder were fabricated by a top-seeded melt growth process for powder compacts with/without holes. Simulation for the cooling rate to a liquid nitrogen temperature (77 K) of YBCO samples was carried out using a finite element method (FEM) and the results are compared with the actual cooling rates of samples in liquid nitrogen. The simulated cooling times for the YBCO sample without holes, with six holes and with six holes filled with the metal solder were 80, 47 and 75 sec. respectively, which are similar to the actual cooling times of 84, 52 and 78 sec. estimated for the same samples cooled in liquid nitrogen. The shorter cooling time of the sample with artificial holes are attributed to the increased surface areas associated with the presence of artificial holes. The metal filling into the holes did not give any remarkable effect on the cooling efficiency.

• Proceedings of the KIEE Conference
• /
• 2000.11c
• /
• pp.479-481
• /
• 2000

The effect of $Al_{2}O_{3}+Y_{2}O_{3}$ additives on fracture toughness of $\beta-SiC-TiB_2$ composites by hot-pressed sintering were investigated. The f$\beta-SiC-TiB_2$ ceramic composites were hot-presse sintered and annealed by adding 16, 20, 24wt% $Al_{2}O_{3}+Y_{2}O_{3}$(6 : 4wt%) powder as a liquid forming additives at low temperature($1800^{\circ}C$) for 4h. In this microstructures, the relative density is over 95.88% of the theoretical density and the porosity increased with increasing $Al_{2}O_{3}+Y_{2}O_{3}$ contents because of the increasing tendency of pore formation. The fracture toughness showed the highest of $5.88MPa{\cdot}m^{1/2}$ for composites added with 20wt% $Al_{2}O_{3}+Y_{2}O_{3}$ additives at room temperature. The electrical resistivity showed the lowest of $5.22{\times}10^{-4}\Omega{\cdot}cm$ for composite added with 20wt% $Al_{2}O_{3}+Y_{2}O_{3}$ additives at room temperature and is all positive temperature coefficient resistance (PTCR) against temperature up to $700^{\circ}C$.

• Journal of the Korean Chemical Society
• /
• v.36 no.2
• /
• pp.305-310
• /
• 1992

(${\eta}^5$-Cyclopentadienyl)bis(ethylene)cobalt (Jonas reagent), (${\eta}^5$-cyclopentadienyl)di(carbonyl)cobalt, and bis(${\eta}^5$-cyclopentadienyl)cobalt (cobaltocene) were reacted with oximes, respectively, under various conditions for synthesizing cobalt oxime sandwich complex. Jonas reagent and a dienemonooxime, 2,4-hexadienealdoxime underwent the reaction. This produced unexpected compound, (${\eta}^5$-cyclopentadienyl)(2,4-hexadienenitrile)cobalt [VII]. The compound [VII] was identified by NMR, mass spectrometer, IR and elemental analyzer etc.

• Korean Journal of Plant Resources
• /
• v.33 no.2
• /
• pp.93-105
• /
• 2020

The study was investigated in vegetation and environmental factors of Thuja koraiensis habitats where provided for ecological evidence data for conservation and management. Study plots were located at altitudes of 1,000~1,588 m with inclinations of 10~30°. A total of 150 taxa was identified 22 quadrates in 6 study sites. The highest basal area was analyzed in Mt. Gariwangsan 49.98 ㎡/㏊ with the lowest Mt. Hwaaksan 3.46 ㎡/㏊. Thuja koraiensis forest was classified into two communities; Abeis nephrolepis-Taxus cuspidata community, Betula ermanii-Thuja koraiensis community. As a result of Multi-Response Permutation Procedures test, there was significant difference among the communities.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.11
• /
• pp.1248-1255
• /
• 2012

LDPC decoder architectures are generally classified into serial, parallel and partially parallel architectures. Conventional method of LDPC decoding in general give rise to a large number of computation operations, mass power consumption, and decoding delay. It is necessary to reduce the iteration numbers and computation operations without performance degradation. This paper studies horizontal shuffle scheduling(HSS) algorithm and self-correction normalized min-sum(SC-NMS) algorithm. In the result, number of iteration is half than conventional algorithm and performance is almost same between sum-product(SP) and SC-NMS. Finally, This paper implements high-speed LDPC decoder based on FPGA. Decoding throughput is 816 Mbps.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.9C
• /
• pp.848-854
• /
• 2009

DVB-SSP is a new broadcasting system for hybrid satellite communications, which supports mobile handhold systems and fixed terrestrial systems. An upper layer, including erasure Reed-Solomon error correction combined with cyclic redundancy check. However, a critical factor must be considered in upper layer decoding. If there is only one bit error in an IP packet, the entire IP packet is considered as unreliable bytes, even if it contains correct bytes. If, for example, there is one real byte error, in an If packet of 512 bytes, 511 correct bytes are erased from the frame. Therefore, this paper proposed upper layer decoding methods; hybrid decoding. By means of simulation we show that the performance of the proposed decoding algorithm is superior to that of the conventional one in AWGN channel and TI channel.