• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.5B
• /
• pp.378-389
• /
• 2006

An IP address lookup scheme has become a critical issue increasingly for high-speed networking techniques due to the advent of IPv6 based on 128bit. In this paper, a novel global IPv6 unicast address lookup scheme is proposed for next generation internet routers. The proposed scheme perform a variable multiple hashing based on prefix grouping. Accordingly, it should not only minimize overflows with the proper number of memory modules, but also reduce a memory size required to organize forwarding tables. It has the fast building and searching mechanisms for forwarding tables during only a single memory access. Besides, it is easy to update forwarding tables incrementally. In the simulation using CERNET routing data as a 6bone test phase, we compared the proposed scheme with a similar scheme using a uniform multiple hashing. As a result, we verified that the number of overflows is reduced by 50% and the size of memory for forwarding tables is shrunken by 15% with 8 tables.

• Journal of Elementary Mathematics Education in Korea
• /
• v.21 no.1
• /
• pp.73-92
• /
• 2017

A table as an effective arrangement tool of a set of data has not been focused on as a single research subject despite of the fact that the table has been clearly one of learning and teaching elements of national math curriculum for a long time. I hope this article gets to be a starting point for future studies of tables. For this, the Finland elementary mathematics textbooks which use tables so often for many various purpose are chosen and analysed. As a result, it confirms that tables can be practical tools for developing different mathematical ideas in mathematics textbooks. Its applicable area is not limited on statistics but numbers and operations, geometry, measurement, ratio and rate. In addition, some ideas of the outlook, the size and dimension of tables, and the context of datum and etc are induced from the Finland elementary mathematics textbooks.

• Progress in Medical Physics
• /
• v.32 no.3
• /
• pp.59-69
• /
• 2021

Purpose: The relationship between computed tomography (CT) number and electron density (ED) has been investigated in previous studies. However, the role of these measures for guiding cancer treatment remains unclear. Methods: The CT number was plotted against ED for different imaging protocols. The CT number was imported into ED tables for the Pinnacle treatment planning system (TPS) and was used to determine the effect on dose calculations. Conversion tables for radiation dose calculations were generated and subsequently monitored using a dosimeter to determine the effect of different CT scanning protocols and treatment sites. These tables were used to retrospectively recalculate the radiation therapy plans for 41 patients after an incorrect scanning protocol was inadvertently used. The gamma index was further used to assess the dose distribution, percentage dose difference (DD), and distance-to-agreement (DTA). Results: For densities <1.1 g/cm³, the standard deviation of the CT number was ±0.6% and the greatest variation was noted for brain protocol conditions. For densities >1.1 g/cm³, the standard deviation of the CT number was ±21.2% and the greatest variation occurred for the tube voltage and head and neck (H&N) protocol conditions. These findings suggest that the factors most affecting the CT number are the tube voltage and treatment site (brain and H&N). Gamma index analyses for the 41 retrospective clinical cases, as well as brain metastases and H&N tumors, showed gamma passing rates >90% and <90% for the passing criterion of 2%/2 and 1%/1 mm, respectively. Conclusions: The CT protocol should be carefully decided for TPS. The correct protocol should be used for the corresponding TPS based on the treatment site because this especially affects the dose distribution for brain metastases and H&N tumor recognition. Such steps could help reduce systematic errors.

• Proceedings of the IEEK Conference
• /
• 2001.06d
• /
• pp.41-44
• /
• 2001

Variable length coding (VLC) has been used in many well known standard video coding algorithms such as MPEG and H.26x. However, VLC can not be processed parallelly because of its sequentiality. This sequentiality is a big barrier for implementing a real-time software video codec since parallel schemes can not be applied. In this paper, we propose a new fast VLD (Variable Length Decoding) method based on the probabilistic distribution of symbols in VLC tables used in MPEG as well as H.263 standard codecs. Even though MPEG suggests the table partitioning method, they do not show theoretically why the number of partitioned tables is two or three. We suggest the method for deciding the number of partitioned tables. Applying our scheme to several well-known MPEG-2 test sequences, we can reduce the computational time up to about 10% without any sacrificing video quality

• Proceedings of the IEEK Conference
• /
• 2003.07d
• /
• pp.1363-1366
• /
• 2003

This paper introduces computerized version of Hangout(Korean Language) Standard Pronunciation Rule that can be used in Korean processing systems such as Korean voice synthesis system and Korean voice recognition system. For this purpose, we build Petri net models for each items of the Standard Pronunciation Rule, and then integrate them into the vocal sound conversion table. The reversion of Hangul Standard Pronunciation Rule regulates the way of matching vocal sounds into grammatically correct written characters. This paper presents not only the vocal sound conversion table but also character conversion table obtained by reversely converting the vocal sound conversion table. Making use of these tables, we have implemented a Hangeul character into a vocal sound system and a Korean vocal sound into character conversion system, and tested them with various data sets reflecting all the items of the Standard Pronunciation Rule to verify the soundness and completeness of our tables. The test results shows that the tables improves the process speed in addition to the soundness and completeness.

• Communications for Statistical Applications and Methods
• /
• v.10 no.2
• /
• pp.479-496
• /
• 2003

We investigate logit confidence intervals for the odds ratio based on the delta method. These intervals are constructed using pseudo-Bayes estimators. The Gart method and Agresti method smooth the observed counts toward the model of equiprobability and independence, respectively. We obtain better coverage probability by smoothing the observed counts toward the pseudo-Bayes estimators in 2$\times$2 table. We also improve legit confidence intervals in 2$\times$2$\times$K tables by generalizing these ideas. Utilizing pseudo-Bayes estimators, we obtain better coverage probability by smoothing the observed counts toward the conditional independence model, no three-factor interaction model and saturated model in 2$\times$2$\times$K tables.

• The Korean Journal of Applied Statistics
• /
• v.10 no.2
• /
• pp.339-352
• /
• 1997

Chi-square test based on large sample theory is inappropriate for testing the row homogeneity in two-way contingency table with several sparse cells. For that case, exact testing methods has been developed in the literature and implemented in StatXact(1991). However, considerable computing time is inevitable for moderate size tables. So, Monte Carlo approximation is recommended frequently. In this study, we propose a simple algorithm for generating two-way random tables with fixed row and column margins for small sample chi-square test. Also, we develop “Turkey-type” method for multiple between-row comparisons.

• Journal of the Korean Statistical Society
• /
• v.28 no.3
• /
• pp.347-358
• /
• 1999

Correspondence analysis is an exploratory method for two-way contingency tables intended to display the association pattern between row and column categories. It has been developed for several decades mainly in France and Japan and, nowadays, is popular worldwide. For the special case, however, that the column consists of ordered categories, correspondence analysis may yield ackward result so that it cannot be fully accommodated. That's because the row and column categories are assumed to be nominal in the ordinary correspondence analysis. The aim of this study is to develop the correspondence analysis for two-way contingency tables with ordered column categories. It is based on two specific algorithms,

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.1
• /
• pp.159-171
• /
• 2003

In this paper, same parts of a domestic automobiles and foreign automobiles are disassembled fur the evaluation of disassemblability, especially door trim and bumper. Influencing factors of disassembly are determined by the classification of bottleneck process in disassembly process. On the bases of disassembly sequence and structure of parts and subassembly, disassemblability is classified into aye categories. The influencing factors, which are related with the five categories are determined. By these relations, the checklist for disassembly evaluation is draw up and score tables of checked factors are established. For the establishing the disassembly score tables, the weighting values of each five categories are calculated by the disassembly test of automobiles and then, the weighting values of each influencing factors of five categories are calculated by the method of AHP (Analytic Hierarchy Process). And the last, the weighting values are modified and recalculated from the disassembly test. Using these weighting values, the score of influencing factors are determined and then, the score tables are established based on the score of influencing factors.

• Journal of Korean Library and Information Science Society
• /
• v.24
• /
• pp.449-484
• /
• 1996

The purpose of this study is to analyze the structural model of classification, to compare enumerative schemes with faceted schemes and finding the facted schems used in the Dewey Decimal Classification. The Structural model of classifications can be divided to enumerrative schemes and facted schemes(analytico-synthetic schemes). Enumerative schemes represent the various kind of subject in different ways and have to not only list all existing combinations of subjects but also any of potential subjects. Faceted schemes is the decomposition of concepts into all possible characteristics which are known as facets. DDC was originally created as enumerative, but over 20 editions has moved increasing towards synthetic features such as the add instructions, and the seven auxiliary tables. Many DDC class numbers found in the Schedules may be subdivied by another number(or part of it) that has been drawn from the Schedules or auxiliary tables. This process of subdividing class numbers is called number building and it can be done only when there are number building instruction in the Schedules or Tables.