• 마이크로전자및패키징학회지
• /
• 제16권3호
• /
• pp.19-24
• /
• 2009

3차원 패키지용 고종횡비 TSV(through-Si via)를 이용한 배선 공정에서 via 충진을 위한 대표적인 방법중의 하나가 via 내부에 $SiO_2$ 절연막을 형성한 다음 Sputtering법으로 접착/확산방지막 및 씨앗층을 형성하고 전해도금법으로 Cu를 충진하는 방법이다. 본 연구에서는 Cu 박막과 $SiO_2$ 절연막 사이에 reactive sputtering법으로 증착한 $TaN_x$ 박막의 조성에 따른 접착특성 및 확산방지막특성을 연구하였다. $TaN_x$ 박막의 질소함량에 따른 Cu 박막과 $SiO_2$ 절연막사이의 접착력을 $180^{\circ}$ peel test와 topple test를 이용하여 정량적으로 측정하였다. $TaN_x$ 박막 내 질소함량이 증가함에 따라 접착력은 더욱 증가하였는데, 이는 질소함량이 증가함에 따라 $TaN_x$ 박막과 $SiO_2$ 절연막사이의 계면에서 계면반응물의 생성이 증가하였기 때문으로 해석된다. 고온에서 열처리를 통하여 Cu에 대한 확산방지막으로서의 특성을 조사한 결과, $TaN_x$ 박막은 Ta 박막에 비하여 우수한 Cu에 대한 확산방지 특성을 보였으며 N/Ta성분비 1.4까지는 $TaN_x$ 박막내 질소함량의 증가에 따라 확산방지특성도 향상되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1476-1478
• /
• 2002

In recent years, the tantalum nitride(TaN) thin-film has been developed for the electronic resistor, inductor and capacitor. In this papers, this study presents the surface profile and sheet-resistance property relationship of reactive-sputtered TaN thin film resistor processed by TaN(tantalum nitride) on alumina substrate. The TCR properties of the TaN films were discussed in terms of crystallization and thin films surface morphology due to annealing temperature. It is clear that the TaN thin-films resistor electrical properties are low TCR related with it's annealing temperature and ambient annealing condition. Respectively, at $300{\sim}400^{\circ}C$ on vacuum and nitrogen annealed thin film resistor having a goof thermal stability and lower TCR properties then as deposited thin films expected for the application to the dielectric material of passive component.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2003년도 춘계학술대회 발표 논문집
• /
• pp.106-111
• /
• 2003

Tantalum nitride(TaN) films were deposited by atomic layer deposition(ALD) and plasma assisted atomic layer deposition(PAALD). The deposition of the TaN thin film has been performed using pentakis (ethylmethlyamino) tantalum (PEMAT) and ammonia($NH_3$) as precursors at temperature of $250^{\circ}C$, where the temperature was proven to be ALD window for TaN deposition from our previous experiments. The PAALD deposited TaN film shows better physical properties than thermal ALD deposited TaN film, due to its higher density$(~11.59 g/\textrm{cm}^3$) and lower carbon(~ 3 atomic %) and oxygen(~ 4 atomic %) concentration of impurities.

• 한국자기학회지
• /
• 제5권5호
• /
• pp.601-605
• /
• 1995

Magnetic properties of FeTaN and FeTaC films deposited by DC magnetron reactive sputter were investigated, and correlated with their microstructures. The optimum magnetic properties of Hc : 0.25 Oe, Bs : 14.5 kG, and ${\mu}'$ : 4000 (5MHz) are observed in the $Fe_{78.8}Ta_{8.5}N_{12.7}$ film, and Hc : 0.25 Oe, Bs : 14.5 kG, and ${\mu}'$ : 2700 (5MHz) in the $Fe_{75.6}Ta_{8.1}C_{16.3}$ film. In both FeTaN and FeTaC films with minimum grain size show the best soft magnetic properties. Thermal stability of the soft magnetic properties of FeTaN is found to be higher than FeTaC for similar compositons. TaN and TaC particles form to retard the growth of $\alpha$-Fe grains. TaN particles in FeTaN show higher efficiency in retarding the grain growth during heat treatments resulting the higher thermal stability, compared to TaC particles in FeTaC films.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.97-100
• /
• 2001

This paper presents the characteristics of Ta-N thin-film strain gauges as high-temperature strain gauges, which were deposited on Si substrate by DC reactive magnetron sputtering in an argon-nitrogen atmosphere(Ar-(4∼16 %)N$_2$). These films were annealed for 1 hour in 2x10$\^$-6/ Torr vaccum furnace range 500∼1000$^{\circ}C$. The optimized conditions of Ta-N thin-film strain gauges were annealing condition(900$^{\circ}C$, 1 hr.) in 8% N$_2$ gas flow ratio deposition atmosphere. Under optimum conditions, the Ta-N thin-films for strain gauges is obtained a high resistivity, $\rho$=768.93 ${\mu}$Ω cm, a low temperature coefficient of resistance, TCR=-84 ppm/$^{\circ}C$ and a high temporal stability with a good longitudinal gauge factor, GF=4.12.

• 한국재료학회지
• /
• 제27권1호
• /
• pp.32-38
• /
• 2017

Insulating $TaN_x$ films were grown by plasma enhanced atomic layer deposition using butylimido tris dimethylamido tantalum and $N_2+H_2$ mixed gas as metalorganic source and reactance gas, respectively. Crossbar devices having a $Pt/TaN_x/Pt$ stack were fabricated and their electrical properties were examined. The crossbar devices exhibited temperature-dependent nonlinear I (current) - V (voltage) characteristics in the temperature range of 90-300 K. Various electrical conduction mechanisms were adopted to understand the governing electrical conduction mechanism in the device. Among them, the PooleFrenkel emission model, which uses a bulk-limited conduction mechanism, may successfully fit with the I - V characteristics of the devices with 5- and 18-nm-thick $TaN_x$ films. Values of ~0.4 eV of trap energy and ~20 of dielectric constant were extracted from the fitting. These results can be well explained by the amorphous micro-structure and point defects, such as oxygen substitution ($O_N$) and interstitial nitrogen ($N_i$) in the $TaN_x$ films, which were revealed by transmission electron microscopy and UV-Visible spectroscopy. The nonlinear conduction characteristics of $TaN_x$ film can make this film useful as a selector device for a crossbar array of a resistive switching random access memory or a synaptic device.

• 한국재료학회지
• /
• 제15권6호
• /
• pp.426-430
• /
• 2005

Chemical mechanical polishing (CMP) is an essential process in the production of integrated circuits containing copper interconnects. The effect of alanine in reactive slurries representative of those that might be used in copper CMP was studied with the aim of improving selectivity between copper(Cu) film and tantalum-nitride(TaN) film. We investigated the pH effect of nano-colloidal silica slurry containing alanine through the chemical mechanical polishing test for the 8(inch) blanket wafers as deposited Cu and TaN film, respectively. The copper and tantalum-nitride removal rate decreased with the increase of pH and reaches the neutral at pH 7, then, with the further increase of pH to alkaline, the removal rate rise to increase soddenly. It was found that alkaline slurry has a higher removal rate than acidic and neutral slurries for copper film, but the removal rate of tantalum-nitride does not change much. These tests indicated that alanine may improve the CMP process by controlling the selectivity between Cu and TaN film.

• 한국재료학회지
• /
• 제9권8호
• /
• pp.837-842
• /
• 1999

Ta/TaN 다층피막구조는 경도는 떨어지지만 연성이 큰 Ta 막과 취성을 가지며 경도가 높은 TaN 막을 교대로 반복하여 만든 다층구조로서 경도와 연성의 장점이 잘 조화되어 높은 인성을 나타낼 것으로 기대된다. 본 연구에서는 고속도강 기판위에 Ta/TaN 복합다층피막과 compositional gradient Ta-TaN 막을 각각 반응성 스퍼터링에 의하여 증착하고 열처리에 따른 경도 및 접착성을 조사하였다. $N_2$/Ar 유량비가 0.4일 때 결정성이 가장 우수한 TaN 막이 얻어지며, Ta/TaN 복합다층피막의 경도 및 스크래치 테스트 결과도 가장 우수하였다. 또한 Ta/TaN 복합다층피막 증착후의 어닐링 처리 시 어닐링 온도가 증가할수록 피막의 경도와 접착성이 악화되었으며, compositional modulation wavelength가 감소함에 따라 Ta/TaN 복합다층피막의 경도는 증가하지만 접착성은 wavelength에 대한 의존성이 약하게 나타났다. 그리고 compositional gradient Ta-TaN 막 증착후의 어닐링 처리 시 경도와 스크래치 테스트 값은 각각 20$0^{\circ}C$와 40$0^{\circ}C$에서 최대값을 나타내었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 연구회
• /
• pp.197-200
• /
• 2001

반응성 스퍼터링법으로 TaN film을 증착한 후 열처리온도에 따라 TaN 박막의 $R_s$(sheet resistance) 특성을 평가하고 미세구조 변화에 따른 전기적 특성 변화를 고찰하였다. TaN 박막을 열처리한 결과 $400^{\circ}C$에서 $600^{\circ}C$까지는 (110)의 회절피크만 보이다가 $700^{\circ}C$ 에서는 (200)의 회절 피크가 나타났고 특히 as-deposition 상태와 $300^{\circ}C$ 열처리시에는 Ta와 TaN 상이 혼재한 상태로 나타났으며 전기저항 변화는 as-deposition 상태가 $140{\Omega}/{\square}$로 가장 높았으며 열처리 온도가 증가함에 따라 저항은 점차적으로 감소하다가 $600^{\circ}C$와 $700^{\circ}C$에서는 전기저항이 다시 증가하였다. $500^{\circ}C$까지는 표면 형상이나 표면조도보다는 열처리 온도의 증가에 따른 TaN 박막의 결정구조 변화가 전기저항에 영향을 주는 주 요인으로 작용하고, $600^{\circ}C$와 $700^{\circ}C$ 열처리시에 결정립의 증가에도 불구하고 전기저항이 증가하는 것은 고온 열처리에 의한 표면조도가 증가하였기 때문이라고 생각된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.1022-1025
• /
• 2001

This paper presents the characteristics of TaN thin-film as high-temperature strain gauges, which were deposited on Si substrate by DC reactive magnetron sputtering in an argon-nitrogen atmosphere(Ar-(4∼20%)N$_2$). The electrical and mechanical characteristics of these films investigated with the thickness range 1650∼1870${\AA}$ and room temperature resistivities in the range 178.3 ${\mu}$$\Omega$cm to 3175.7 ${\mu}$$\Omega$cm. The TaN thin-film strain gauge deposited in Ar-(20%)N$_2$atmosphere is obtained a temperature coefficient of resistance(TCR), 0∼-1357 ppm/$^{\circ}C$ in the temperature range 25∼275$^{\circ}C$ and a high temporal stability with a longitudinal gauge factor, 2.92∼3.47. Because of their high resistivity, low TCR and linear gauge factor, these cermet thin-film may allow high-temperature strain gauges miniaturization.