• 대한치과기공학회지
• /
• 제27권1호
• /
• pp.19-25
• /
• 2005

Ti6Al4V alloy have been mainly used as implant materials. Ti-6Al-4V alloy instead of pure Ti is being widely used as biomaterials has some characteristics such as high fatigue strength, tensile strength. But it has been reported recently that vanadium component expresses cytotoxicity and carcinogenicity and aluminium component is related with dementia of Alzheimer type. In order to overcome their detrimental effects, $\beta$-phase stabilizer Nb was chosen in the present study, in addition Ta and Hf were added to Ti-40wt.%Nb alloy to improve its mechanical properties. This paper was described the influence of heat treatment of Ti-40Nb alloys with 2wt%Ta, 2wt%Hf on the mechanical properties. Specimens of Ti alloys were melted in vacuum arc furnace and homogenized at 1050$^{\circ}C$ for 24 hr. and then were aged after solution heat treat at $\alpha+\beta$ and $\beta$ regions. The mechanical properties of Ti alloys were analysed by hardness test, tensile test, elongation test and SEM test. The results can be summarized as follows: 1. The mechanical properties Ti-40wt.%Nb were improved when 2wt.% Ta and 2wt.%Hf were added. 2. The higher tensile strength value and elongation at solution heat treat was higher than solution heat treat and then were aged.

• 한국표면공학회지
• /
• 제41권2호
• /
• pp.57-62
• /
• 2008

Electrochemical properties of Ti-30Ta-$(3{\sim}15)$Nb alloys coated by HA/Ti compound layer have been studied by various electrochemical method. Ti-30Ta binary alloys contained 3, 7, 10, and 15 wt% Nb contents were manufactured by the vacuum furnace system. The specimens were homogenized for 24 hrs at $1000^{\circ}C$. The samples were cut and polished for corrosion test and coating. It was coated with HA/Ti compound layer by magnetron sputter. The HA/Ti non-coated and coated morphology of Ti alloy were analyzed by x-ray diffractometer(XRD) and filed emission scanning electron microscope(FE-SEM). The corrosion behaviors were investigated using potentiodynamic method in 0.9% NaCl solution at $36.5{\pm}1^{\circ}C$. The homoginazed Ti-30Ta-$(3{\sim}15wt%$)Nb alloys showed the ${\alpha}+{\beta}$ phase, and ${\beta}$ phase peak was predominantly appeared with increasing Nb content. The microstructure of Ti alloy was transformed from needle-like structure to equiaxed structure as Nb content increased. HA/Ti composite surface showed uniform coating layer with 750 nm thickness. The corrosion resistance of HA/Ti composite coated Ti-alloys were higher than those of the non-coated samples in 0.9% NaCl solution at $36.5{\pm}1^{\circ}C$. Especially, corrosion resistance of Ti-Ta-Nb system increased as Nb content increased.

• 한국재료학회지
• /
• 제8권4호
• /
• pp.304-311
• /
• 1998

0.07%C-0.014%Ti-0.015Nb-0.005%B강 (강종 B)을 각각 TMCP처리하여 그 기계적 특성과 B의 거동을 조사하였다. Ta-B강이 Ti-Nb-B강보다 인장강도는 더 우수하였으나 충격 흡수에너지는 훨씬 더 낮았다. Ta-B강의 강도가 Ti-Nb-B강보다 더 우수한 이유는 Ta-B강에서의 Ta의 석출강화 효과가 Ti-Nb-B강에서의 Ti와 Nb의 석출강화 효과보다 더 크기 때문으로 생각된다. Ta-B강은 입내파괴, Ti-Nb-B강은 임계파괴의 파괴양상을 보여이며, Ti-Nb-B강이 Ta-B 강보다 더 큰 충격 흡수에너지를 나타내었다. TMCP에서는 항온변태시의 평형석출과는 달리 연속냉각방법을 사용하였기 때문에 B가 결정립계에 평형적 또는 비평형적으로 편석되어 준안정상으로 생각되는 연속적인 필름 형태의 붕화물을 형성한다. 또한, 냉각속도의 차이에 따라 석출물은 결정질이 되거자 비정질이 되었다. B의 함량이 많은 Ti-Nb-B강에서는 석출물이 비정질상이었다. 한편, B함량이 적은 Ta-B강에서는 B강에서는 결정립계에서 B가 관찰되지 않아는데, 이것은 결정립계에서의 B의 석출이 B의 함량에 매우 민감함을 의미하는 것이다.

• 한국표면공학회지
• /
• 제51권6호
• /
• pp.344-353
• /
• 2018

Plasma electrolytic oxidation of Ti-25Ta-xHf alloy in electrolyte containing Ca and P for dental implants was investigated using various experimental techniques. Ti-25Ta-xHf (x=0 and 15 wt.%) alloys were manufactured in an arc-melting vacuum furnace. Micropores were formed in PEO films on Ti-25Ta-xHf alloys in 0.15 M calcium acetate monohydrate + 0.02 M calcium glycerophosphate at 240 V, 270 V and 300 V for 3 min, respectively. The microstructure of Ti-25Ta-xHf alloys changed from (${\alpha}^{\prime}+{\alpha}^{{\prime}{\prime}}$) phase to (${\alpha}^{{\prime}{\prime}}+{\beta}$) phase by addition of Hf. As the applied potential increased, the number of pore and the area ratio of occupied by micro-pore decreased, whereas the pore size increased. The anatase phase increase as the applied potential increased. Also, the crystallite size of anatase-$TiO_2$ can be controlled by applied voltage.

• 한국표면공학회지
• /
• 제39권1호
• /
• pp.43-48
• /
• 2006

The oxidation behavior and Biocompatibility of pure Ti and Ti-8Ta-3Nb alloy were studied in dry air atmosphere. The specimens showed that Ti-8Ta-3Nb alloy had higher oxidation resistance than pure Ti at $650^{\circ}C$. Cytotoxicity test also revealed that moderate oxidation treatment lower cell toxicity and Ti-8Ta-3Nb alloy showed better results compared with pure Ti. The weight gains during the oxidation increase rapidly at temperature above $600^{\circ}C$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.492-495
• /
• 2000

In order to develop an ultra-thin CoCr perpendicular magnetic recording layer, we prepared CoCrTa/Ti double layer for perpendicular magnetic recording media by new facing targets sputtering system, Crystallgraphics and magnetic characteristics of CoCrTa on underlayer substrate temperature have been investigated. Crystallgraphic and magnetic characteristic of thin films were evaluated by X-ray diffractometry(XRD), vibrating sample magnetometer(VSM) and atomic force microscopy(AFM). The coercivity and anisotropy field was increased by increasing under layer substrate temperature, c-axis orientation of CoCrTa magnetic recording layer was improved 8$^{\circ}$ to 5.6$^{\circ}$when under layer substrate temperature was 250[$^{\circ}C$]. Also, through annealing effect for CoCrTa/Ti double layer, it was certain that crystallgraphics and magnetic characteristics was improved.

• 한국재료학회지
• /
• 제9권8호
• /
• pp.787-791
• /
• 1999

기계적합금법으로 Ti와 B의 혼합분말로부터 $TiB_2$분말을 제조하였고, Zr과 Ta의 Ti 치환 효과를 조사하였다. (Ti+B)의 혼합분말을 280시간 분쇄하여 $TiB_2$단일상을 얻었고 기계적합금화 도중 비정질상은 관찰되지 않았다. Ti의 일부를 원자반경이 Ti보다 큰 Zr으로 치환한 결과 기계적합금화에 걸리는 시간이 크게 감소한 반면에, 붕화물 생성열이 절대값이 $TiB_2$상보다 작은 Ta로 치환하면 280시간 분쇄하여도 단일상을 형성하지 못하였다.

• 대한치과기공학회지
• /
• 제26권1호
• /
• pp.97-104
• /
• 2004

A new Ti-10Ta-10Nb alloy has designed and examined some possibility of forming more passive oxide film by oxidation treatment which is closely related to corrosion resistance and biocompatibility. Ti-6Al-4V and Ti-10Ta-10Nb alloys were prepared by consumable vacuum arc melting and homogenized at 1050$^{\circ}C$ for 24hours. Alloy specimens were oxidized at the temperature range of 400 to 750$^{\circ}C$ for 30minutes, and the oxide films on Ti alloys were analysed by optical microscope, SEM, XPS and TGA. Cytotoxicity test was performed in MTT assay treated L929 fibroblast cell culture by indirect method. It is found out that the oxide film on Ti-10Ta-10Nb alloy is denser and thinner compared to Ti-6Al-4V alloy. The weight gain during the oxidation was increased rapidly at the temperature above 650$^{\circ}C$ for Ti-6Al-4V alloy and above 700$^{\circ}C$ for Ti-10Ta-10Nb alloy respectively. It was analysed that the passive film of the Ti alloys consisted of TiO2 through X-ray photoelectron spectroscopy (XPS) analysis. It is found out by cytotoxicity test that moderate oxidation treatment lowers cell toxicity, and Ti-10Ta-10Nb alloy showed better result compared to Ti-6Al-4V alloy.

• 한국세라믹학회지
• /
• 제37권10호
• /
• pp.1008-1013
• /
• 2000

SrTi $O_3$(001) 단결정 기판 위에 졸-겔 스핀코팅으로 $SrBi_2(Ta,Nb)_2O_9$ 박막을 도포하고 그 결정화 과정을 고온 X-선 회절분석 (HTXRD)으로 추적하면서 Pt(111)/Ti/ $SiO_2$/Si 위에 성장한 박막과 비교하였다. SrTi $O_3$(001) 단결정 기판 위에 도포된 $SrBi_2Nb_2O_{9}$ 박막은 fluorite-like phase와 같은 transient phase를 거치지 않고 곧바로 순수한 $SrBi_2Nb_2O_9$ 상으로 결정화가 시작되었으며 결정화가 시작되는 온도인 ${\sim}540^{\circ}C$부터 c축 배향성장하였다. 또한 $SrB i_2(Ta,Nb)_2O_9$ 박막은 Ta/Nb 비에 관계없이 $SrTiO_3$(001) 위에서 모두 $(00{\ell})$로 배향되었으며, 코팅 횟수가 늘어나 필름의 두께가 증가함에 따라 c축 배향성은 미세한 감소를 보였다. $SrBi_2Nb_2O_9/SrTiO_3$단면을 TEM으로 관찰한 결과 $SrBi_2Nb_2O_9$은 대체로 불규칙한 크기의 다결정체로 되어 있었으나 계면 부근에서는 [001]$_{SBN}$//[001]$_{SrTi}$ $O_3$/, [100]$_{SBN}$//[100]$_{SrTi}$ $O_3$/라는 결정학적 관계를 가지며 에피탁샬 성장했음을 알 수 있었다.있었다.

• 마이크로전자및패키징학회지
• /
• 제6권2호
• /
• pp.75-81
• /
• 1999

$CaTiO_3$의 유전적 특성의 문제점을 해결하기 위해 $CaTiO_3$에 복합페로브스카이트 구조를 갖는$ La(Mg_{2/3}Ta_{1/3})O_3$를 고용시켜 마이크로파 유전특성을 조사하였다. XRD분석을 통하여 $CaTiO_3$에 $ La(Mg_{2/3}Ta_{1/3})O_3$를 첨가하면 고용체가 형성되며, 구조적으로는 Orthorhombic구조에서 $ La(Mg_{2/3}Ta_{1/3})O_3$의 첨가량이 증가함에 따라 단사정 대칭의 고용체형으로 바뀌어 가는 것을 확인할 수 있었다. (1-x)$CaTiO_3+xLa(Mg_{2/3}Ta_{1/3})O_3$에서 x값이 0.3일 때 유전율 49, 온도계수+$14ppm/^{\circ}C$, $Q \times f_0$ 값은 17000인 재료를 제조할 수 있었다.