• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2008.11a
• /
• pp.105-106
• /
• 2008

Nanotube morphology change of Ti-Ta-Zr alloy as Zr content increase has been researched using various experimental methods. Ti-Ta-Zr(3, 7 and 15 wt%) alloys were prepared by arc melting and nano-structure controlled for 24 hr at $1000^{\circ}C$ in argon atmosphere. Formation of oxide nanotubes are conducted by anodizing a Ti-Ta-Zr alloy in $H_3PO_4$ electrolytes with small amounts of fluoride ions at room temperature. Electrochemical experiments were carried out with conventional three-electrode configuration with a platinum counter electrode and a saturated calomel reference electrode. The samples were embedded with epoxy resin, leaving a square surface area of $10mm^2$ exposed to the anodizing electrolyte, 1.0M $H_3PO_4$ containing 0.8wt% NaF.

• Journal of the Korean institute of surface engineering
• /
• v.29 no.6
• /
• pp.621-627
• /
• 1996

$SrBi_{2x}TaO_9$ ferroelectric thin films were prepared on platinized silicon substrates using MOD proces, and crystallization behavior of the films was investigated with variation of the annealing temperature and Bi content x. Crystalline phase of bismuth layered perovskite structure was formed even by baking the films at $800^{\circ}C$ for 5 minutes in air, and was not changed by annealing at temperatures raning from $700^{\circ}C$ to $900^{\circ}C$ for 1 hour in oxygen ambient. When $SrBi_{2x}TaO_9$ thin films ($0.8\lex\ie1.6$) were annealed at $800^{\circ}C$, Preferred orientation of the films along c-axis was observed with $x\ge1.2$. With increasing Bi content x, surface morphology of the films was changed from equiaxed grains to elongated grains.

• Corrosion Science and Technology
• /
• v.8 no.4
• /
• pp.162-169
• /
• 2009

Pure titanium and its alloys are drastically used in implant materials due to their excellent mechanical properties, high corrosion resistance and good biocompatibility. However, the widely used Ti-6Al-4V is found to release toxic ions (Al and V) into the body, leading to undesirable long-term effects. Ti-6Al-4V has much higher elastic modulus than cortical bone. Therefore, titanium alloys with low elastic modulus have been developed as biomaterials to minimize stress shielding. For this reason, Ti-30Ta-xZr alloy systems have been studied in this study. The Ti-30Ta containing Zr(5, 10 and 15 wt%) were 10 times melted to improve chemical homogeneity by using a vacuum furnace and then homogenized for 24 hrs at $1000^{\circ}C$. The specimens were cut and polished for corrosion test and Ti coating and then coated with TiN, respectively, by using DC magnetron sputtering method. The analyses of coated surface were carried out by field emission scanning electron microscope(FE-SEM). The electrochemical characteristics were examined using potentiodynamic (- 1500 mV~+ 2000 mV) and AC impedance spectroscopy(100 kHz~10 mHz) in 0.9% NaCl solution at $36.5{\pm}1^{\circ}C$. The equiaxed structure was changed to needle-like structure with increasing Zr content. The surface defects and structures were covered with TiN/Ti coated layer. From the polarization behavior in 0.9% NaCl solution, The corrosion current density of Ti-30Ta-xZr alloys decreased as Zr content increased, whereas, the corrosion potential of Ti-30Ta-xZr alloys increased as Zr content increased. The corrosion resistance of TiN/Ti-coated Ti-30Ta-xZr alloys were higher than that of the TiN-coated Ti-30Ta-xZr alloys. From the AC impedance in 0.9% NaCl solution, polarization resistance($R_p$) value of TiN/Ti coated Ti-30Ta-xZr alloys showed higher than that of TiN-coated Ti-30Ta-xZr alloys.

• Journal of the Microelectronics and Packaging Society
• /
• v.16 no.3
• /
• pp.19-24
• /
• 2009

Formation of an adhesion/barrier layer and a seed layer by sputtering techniques followed by electroplating has been one of the most widely used methods for the filling of through-Si via (TSV) with high aspect ratio for 3-D packaging. In this research, the adhesion and diffusion-barrier properties of the $TaN_x$ film deposited by reactive sputtering were investigated. The adhesion strength between Cu film and $SiO_2$/Si substrate was quantitatively measured by $180^{\circ}$ peel test and topple test as a function of the composition of the adhesive $TaN_x$ film. As the nitrogen content increased in the adhesive $TaN_x$ film, the adhesion strength between Cu and $SiO_2$/Si substrate increased, which was attributed to the increased formation of interfacial compound layer with the nitrogen flow rate. We also examined the diffusion-barrier properties of the $TaN_x$ films against Cu diffusion and found that it was improved with increasing nitrogen content in the $TaN_x$ film up to N/Ta ratio of 1.4.

• Journal of the Korean Ceramic Society
• /
• v.31 no.11
• /
• pp.1330-1336
• /
• 1994

Ta2O5 films were deposited on the p-Si(100) substrates by ECR-PECVD and annealed in O2 atmosphere. The thicknesses of Ta2O5/SiO2 layers were measured by an ellipsometer and a cross-sectional TEM. Annealing in O2 atmosphere enhanced the stoichiometry of the Ta2O5 film and reduced the impurity carbon content. Ta2O5 films were crystallized at the annealing temperatures above 75$0^{\circ}C$. The best leakage current characteristics and the maximum dielectric constant of Ta2O5/SiO2 film capacitor were observed in the specimen annealed at $700^{\circ}C$ and 75$0^{\circ}C$, respectively. The flat band voltage of the Al/Ta2O5/SiO2/p-Si MOS capacitor was varied in the range of -0.6~-1.6 V with the annealing temperature. The conduction mechanism in the Ta2O5 film, the variation of the effective oxide charge density with the annealing temperature, and the effective electric field distribution in the Ta2O5/SiO2 double layer were also discussed.

• Journal of the Korean Ceramic Society
• /
• v.28 no.5
• /
• pp.347-352
• /
• 1991

The effects of Ta2O3 doping on the microstructure, electrical properties and thermal expansion in Pb(Zr0.525Ti0.475)O3 ceramics were studied. Density, average grain size, electromechanical coupling factor kp and thermal expansion coefficient of unpoled and poled samples were measured as a function of Ta2O5 content. Average grain size was decreased and density increased above 0.6 mol% Ta2O5 addition. In case of 0.2 mol% addition, density showed minimum according to grain growth. Dielectric constant and electromechanical coupling factor kp were the lowest in 0.2 mol% addition increased with Ta2O5 addition.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1998.09a
• /
• pp.85-90
• /
• 1998

Reactive ion etching (RIE) of Ta-Al alloy thin film and SiO2 thin films was observed during the etching with the CF4 gas and the could be used effectively to etch the Ta-Al alloy thin film. The etching rate of the thin film at a Ta content of 50 mol% was about 67$\AA$/min. No selectivity between the Ta-Al alloy thin film and SiO2 thin films was observed during the etching with the CF4 gas and the etching rate of the SiO2 layer was 12 times faster than that of the Ta-Al alloy thin film. In addition, it was observed that photoresist of AZ5214 was more useful than Shiepley 1400-2 in RIE with the CF4 gas.

• Korean journal of food and cookery science
• /
• v.15 no.6
• /
• pp.611-617
• /
• 1999

Commercial soybean oil, which did not contain any antioxidant, were autoxidized at $60{\pm}2^{\circ}C$ for 79 days, and the changes of peroxide value(POV), thiobarbituric acid value(TBAV), conjugated dienoic acid(CDA) content, and fatty acid composition of the oil were studied during the 79 day-storage period. The samples with POV S of 0, 150, 300, 500, 450, 400 and 300 meq./kg oil were used for the test of mutagenic activity. The Ames test was carried out with and without metabolic activation. Bacterial strains used in this study were the histidine auxotrophic strains of S. typhimurium TA100, TA1535, and TA102 for the detection of base pair, and TA98 and TA1537 for frame shift mutations. Each series of samples was disso1ved in tetrahydrofuran(inhibitor free) and tested at doses ranging from 0.05 to 5 mg/plate. The autoxidized soybean oil increased significantly(p<0.05) the number of $His^+$ revertant colonies in cases of TA 98 with S9 mix, TA100 without S9 mix, 1535 and 1537 with and without S9, respectively. The samples having the highest peroxide values showed the strongest mutagenicity. It seemed that the amount of hydroperoxides in the oils was closely related to the mutagenic activity of the respective oils.

• Bulletin of the Korean Space Science Society
• /
• 2008.10a
• /
• pp.24.2-24.2
• /
• 2008

We have examined the relative contributions of representative space weather proxies (geomagnetic aa index) to global warming (Global temperature anomaly) and compared them with that of green house effect characterized CO2 content from 1868 to 2005. For this we used Hadcrut3 temperature anomaly (Ta) data, aa index taken at two anti-podal subauroral stations (Canberra Australia and hartland England), and the CO2 data come from historical ice core records. From the comparison between Ta and aa index, we found several interesting results: (1) the linear correlation coefficient between two parameters increases until 1990 and then decreases rapidly, and (2) the scattered plots between two parameters shows different patterns before and after 1990. A partial correlation of Ta and two quantities (aa, CO2) also shows that the geomagnetic effect (aa index) is dominant until about 1990 and the CO2 effect becomes much more important after then. These results imply that the green house effect become very important since at least 1990. For a further analysis, we simply assume that Ta (total) = Ta (aa) + Ta (CO2) and made a linear regression between Ta and aa index from 1868 to 1990. A linear model is then made from the linear regression between energy consumption (a proxy of CO2 effect) and Ta (total) - Ta (aa) since 1990. This linear model makes it possible to predict the temperature anomaly in 2030, about 1 degree higher than the present temperature, which is much larger than in the previous century.

• Korean Journal of Food Science and Technology
• /
• v.32 no.6
• /
• pp.1213-1220
• /
• 2000

The mutagenicity of the thermally oxidized soybean oils was investigated. Each oil sample was taken after 0, 8, 16, 24, 32, 40, and 48 hours of heating at a temperature of $180{\pm}3^{\circ}C$, and was used to study the changes of peroxide value(POV), acid value(AV), iodine value(IV), conjugated dienoic acid content(CDA content, %), and fatty acid composition. Another set of samples was fractionated into non-oxidized and oxidized fractions by column chromatography using silica gel. The mutagenicity of the samples taken from the thermally oxidized oils as well as the non-oxidized and oxidized fractions was investigated with the Ames test. Bacterial tester strains used in the present study were the histidine auxotrophic strains of S. typhimurium TA100, TA1535 and TA 102 for the detection of base pair, and TA98 and TA1537 for frame shift mutations. Each set of samples was dissolved in tetrahydrofuran and tested at doses ranging from 0.05 to 5 mg/plate. The oxidized fractions increased significantly the number of $His^+$ revertant colonies of TA100, TA1537 and TA102, thereby showed mutagenic activity on these strains. However none of the oil samples taken within the 48 hours oxidation period showed any mutagenic activity with and without metabolic activation.