• Journal of the Korea Institute of Military Science and Technology
• /
• v.3 no.1
• /
• pp.207-217
• /
• 2000

A fire fighting characteristic by a single evaporating droplet in the case of a fire of military enclosure space was studied experimentally. Transient cooling of solid surface by water droplet evaporation has been investigated through controlled experiments using a heated brass cylinder. Quantitative predictions of droplet evaporation time and in-depth transient temperature distribution in solid have been made. The particular interest was in the removal of thermal energy from the heated cylinder by evaporative cooling. A $10{\mu}1$ single droplet is deposited on a horizontal brass surface with initial temperatures in the range of $90^{\circ}C{\sim}130^{\circ}C.$ The results can be summarized as follows; Evaporating droplet was divided into three different configuration. Evaporation time was predicted as a function of initial surface temperature ($t_c=492.62-6.89T_{s0}+0.0248T_{s0}^2).$ The contact temperature was predicted as a function of initial surface temperature( $T_{i}$=0.94 $T_{s0}$+1.4), The parameter ${\beta}_o$ was predicted as a function of initial surface temperature( ${\beta}_0$ : 0.O0312 $T_{s0}+0.932$)>)>)

• Elastomers and Composites
• /
• v.51 no.3
• /
• pp.212-217
• /
• 2016

Influence of poly(ethylene-co-vinyl acetate) (EVA) types and cure systems on cure characteristics of foaming EVA compounds were investigated. Three kind EVAs with different VA contents were employed. Influence of triallyl cyanurate (TAC) and dicumylperoxide (DCP) content on the cure characteristics were examined. The minimum torque ($T_{min}$) and delta torque (${\Delta}T$) decreased as the VA content increased. The ${\Delta}T$ was increased by adding TAC and by increasing the DCP content. For the foaming EVA compounds without TAC, the cure times such as the minimum cure time ($t_{min}$), scorch time ($t_2$), and optimal cure time ($t_{90}$) did not show a specific trend according to the DCP contents. For the foaming EVA compounds containing TAC, the cure times decreased as the DCP content increased. From the experimental results, it was found that efficienct DCP/TAC ratio for improvement of the crosslink density was 1.1~2.0.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.20.1-20.1
• /
• 2009

반도체 소자 제조 공정 프로그램인 T-suprem4와 MEDICI를 이용하여 NMOS구조를 설계 하였다. MOS 소자 시뮬레이션을 통해 식각 공정에서 생기는 언더컷에 의한 전기적 특성을 I-V 곡선으로 비교하여 분석하였다. NMOS 구조는 반도체 소자 제조 공정 프로그램 T-suprem4를 이용하여 기본 소자 구조를 설계하였다. 실험의 변수로는 첫째, 소자 공정 중 폴리 실리콘의 언더컷 식각의 각도를 $70^{\circ}C$부터 $110^{\circ}C$까지 $10^{\circ}C$의 차이로 설계하였다. 또한, 언더컷에 의한 드레인-소스사이의 전류($I_{DS}$) 손실이 없는 유효한 각도를 확인하기 위해 $80^{\circ}C$부터 $100^{\circ}C$까지는 $2^{\circ}C$ 크기로 설계 하였다. 둘째, 게이트 크기를 축소하고 역시 언더컷 식각의 각도를 다양하게 설계하였다. 설계된 소자를 반도체 소자 특성 분석 프로그램 MEDICI를 이용하여 소자의 전기적 특성을 측정하였다. 우선 NMOS소자 게이트에 2V의 전압을 인가하였다. 그리고 드레인 부분에 전압을 인가하여 그에 따른 드레인의 전류를 측정 하였다. 드레인 전압은 0V 부터 변화시키며 인가하였다. 측정된 전류 값으로 I-V 곡선을 나타내었다. I-V 곡선의 분석을 통해 식각 후 언더컷의 각도가 $70^{\circ}C$, $80^{\circ}C$, $110^{\circ}C$ 일 때 $4\times10^{-8}A/{\mu}$의 전류가 흐르고, $90^{\circ}C$, $100^{\circ}C$ 일 때는 $1.8\times10^{-7}A/{\mu}$의 전류가 흐르는 것을 확인 하였다. $80^{\circ}C$에서 $100^{\circ}C$까지는 $2^{\circ}C$ 크기로 측정한 결과 $88^{\circ}C$에서 $100^{\circ}C$ 사이 일 때 $90^{\circ}C$ 각도의 경우와 같이 $1.8\times10^{-7}A/{\mu}$의 전류가 측정 되었다. 즉, 식각 중 수직 측벽 도에 언더컷이 $10^{\circ}C$이상 발생하면 $I_{DS}$ 전류 값이 약 22%로 감소하였다. 또한 일반적으로 $90^{\circ}C$의 수직측벽을 가지는 공정이 중요하다고만 생각 되었지만, 이번 연구를 통하여 식각 후 측벽의 각도가 $88^{\circ}C$에서 $92^{\circ}C$ 사이에 있을 때 $I_{DS}$ 값이 가장 최대가 되는 것을 확인 할 수 있었다.

• Journal of Veterinary Clinics
• /
• v.21 no.4
• /
• pp.336-342
• /
• 2004

The immunoenhancing effect of CLA isomers (CLA mixture, 10t-12c CLA, 9c-11c CLA, 9c-11c CLA, and 9t-11t CLA) on phagocytic activity of porcine peripheral blood leukocytes was examined. The phagocytic activities of peripheral blood mononuclear cells (PBMC) and polymorphonuclear cells (PMN) were analyzed by a flow cytometry system. The direct treatments of CLA isomers have no effect on phagocytosis of PMN as well as PBMC composed of approximately 10% monocytes and 90% lymphocytes. However, the phagocytic activities of PMN and monocyterich fraction from PBMC were remarkably enhanced by culture supernatant from PBMC treated with CLA mixture, 10t-12c CLA and 9c-11t CLA but not 9c-11c CLA and 9t-11t CLA. The phagocytic activity of PBMC was not enhanced by culture supernatant from PBMC treated with all CLA isomers. These results indicated that CLA isomers such as CLA mixture, l0t -12c CLA and 9c-11t CLA have an enhancing effect on phagocytosis of PMN and monocytes, which may be mediated through active humoral substances produced by CLA-stimulated PBMC. This study suggested that CLA stimulates PBMC to elaborate soluble factor(s), which may be an important mechanism for the enhancement of phagocytosis in non-specific immunity.

• Journal of radiological science and technology
• /
• v.32 no.1
• /
• pp.101-106
• /
• 2009

Purpose of this study is to compare the signal intensity (SI) and CNR with T1 weighted image using FLASH at 3T abdominal MRI by varying flip angle (FA). Totally 20 patients (male : 12, female : 8, Age : $28{\sim}63$ years with mean : 51) were examined by 3 Tesla MR scanner (Magnetom Tim Trio, SIEMENS, Germany) with 8 channel body array coil between september and October 2008. Imaging parameters were as follows : FLASH sequence, TR : 120 ms, TE : minimum, FOV (field of view) : $360{\times}300\;mm$, Matrix : $256{\times}224$, slice : 6 mm, scan time : 15 sec and Breath-hold technique. Abdominal image, with a 50 ml syringe filled with water placed in the FOV measuring the water signal, were acquired with varying FA through $10^{\circ}$ to $90^{\circ}$ with $10^{\circ}$ interval. SI's were measured three times at liver parenchyme, water, spleen and background and averaged. The CNR's were measured between the ROIs (region of interest). Statistic analysis was performed with ANOVA test using SPSS software (version 17.0). Less than FA $30^{\circ}$, abdominal images were severely inhomogeneity. Especially, T1 effect of water signal was weak. As the flip angle increased, the signal intensity decreased at all the regions. Especially, flip angle of the highest signal intensity was observed with $40^{\circ}$ at the liver parenchyme, $20^{\circ}$ at water, $30^{\circ}$ at the spleen, respectively. The CNR between liver and water was -60.92 at FA $10^{\circ}$ and 15.16 at FA $80^{\circ}$. The CNR between liver and spleen was -3.18 at FA $10^{\circ}$ and 9.65 at $80^{\circ}$. In conclusion, FA $80^{\circ}$ is optimal for T1 weighted effect using FLASH pulse sequence at 3.0 T abdominal MRI.

• Korean Journal of Materials Research
• /
• v.5 no.5
• /
• pp.598-605
• /
• 1995

Thin films of $YB_{2}Cu_{3}O_{7-d}$ were prepared on various substrated of MgO(100), $SrTiO_{3}$, and $LaAlO_{3}$ by using off-axis magentron sputtering methods and annealing in-situ. The prarameters of film fabrication processes had been optimized through a "follow the lcoal maxima" strategy to yield good quality films in therms of the critical temperature $T_{c}$ and the critical current density $J_{c}$. Optimizedproecsses employing a plane magndtron and an cylindrical magnetron yielded $T_{c}$>90K along with $J_{c}$$10^{6}$A/$\textrm{cm}^2$ at 77K and > 2${\times}$$10^{7}$A/$\textrm{cm}^2$ at 5K. The sampels, however, showed degradationinthe properties, after chemical etching for fabrication of microbridges with the line width of 2-10 mocrons. In particular, the value of $T_{c}$ for the microbridges of 2microns was as small as 80%. The degradation was strongly dependent on the line width through a formula : $T_{c}$(e)=$T_{c}$)b) [1-a exp(-1000 bL)} where $T_{c}$(e) and $T_{c}$ (b) are the values of $T_{c}$ in the absolute scale measured after and before chemical etching, respectively and L is the line width in mm. By utilizing a best fitting technique, the proper constant values of a and to b were found as exp(-1.2) and 0.22, respectively. This formula was very useful in estimatiing the upper limit of the device operationtemperature.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.20 no.1
• /
• pp.1-5
• /
• 2010

The studies have been conducted to control the soil borne fungal pathogens viz, Fusarium solani (Mart) Sacc. and Alternaria tenuissima the incitants of root rot and die-back diseases on mulberry stem cuttings planted in the mulberry nurseries and also in established mulberry gardens ten plant extracts with 10% concentration except Lantana camara (undiluted) were tested through poisoned food technique and four biofungicides were also screened by dual culture method under in vitro conditions. Plant extract of Prosopis juliflora showed the maximum inhibition on the mycelial growth (81.2% over A. tenuissima and 80.0% over F. solani) and followed by L. camara (66.7% over A. tenuissima and 68.9% over F. solani). Among the antagonists Pseudomonas fluorescens and Trichoderma viride showed maximum inhibition on the mycelial growth of both pathogenic fungi. The promising plant extracts (P. juliflora and L. camara) and antagonists (P. fluorescens and T. viride) were tested against both the pathogenic fungi under in vivo conditions along with the existing popular chemical Mancozeb. All the tested plant products and bio-fungicides showed inhibitory effect on both fungi. But the maximum survival percentage of mulberry cuttings was recorded in the treatment with T. viride (95% against F. solani and 90% against A. tenuisssima) followed by P. fluorescens (90% against both fungi) and T. harzianum (80% against F. solani and 85% against A. tenuisssima). Incase of the treatments with plant extracts and chemical fungicide the P. juliflora (60% against F. solani and 55% against A. tenuisssima) showed higher survival percentage and followed by L. camara (55% against F. solani and 50% against A. tenuisssima) and Mancozeb (55% against both fungi). In case of control only 10% of survival was recorded in F. solani inoculated cuttings and 15% survival in A. tenuissima inoculated cuttings.

• Korean journal of applied entomology
• /
• v.35 no.2
• /
• pp.153-158
• /
• 1996

Methanol extracts from 79 domestic plant species in 41 families and the crude oil of one Japanese plant species were tested for their larvicidal activities against Thecodiplosis japonensis Uchida et Inouye, using filter paperimpregnated and insect-dipping methods. In a test with 10 mgtpaper, strong larvicidal activity (>90% mortality) was obtained from the extracts of roots from three domestic plants belonging to Ranunculaceae (Aconitum pseudo- leave var. eretum, A. carmichaeli and Clematis florida) and the crude oil of sawdust from a Japanese plant, Thujopsis dolabrata var. hondai (Cupressaceae). However, only the crude oil from the Thujopsis sawdust revealed strong larvicidal activity when tested with 5,000 ppm by insect-dipping method. It is concluded that the Thujopsis sawdust-derived materials could be useful as a new control agent against T. japonensis.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.16 no.4
• /
• pp.283-290
• /
• 1996

This experiment was carried out to determine the effects of soil condition that previous crop cultivated after [TO: Soil of corn cultivated, T1 : Soil of rye monoculture cultivated(l50kg/ha), T2 : Soil of mixedculture cultivated(Rye : Red clover = 120 : 3koa). T3 : Soil of mixed-culture cultivated(Rye : Red clover = 90 : 6kg/ ha), T4 : Soil of mixedculture cultivated(Rye : Red clover = 60 : 9kg/ha), T5 : Soil of mixedculture cultivated (Rye: Red clover = 30 : 12kg/ha), T6 : Soil of red clover monoculture cultivated(l5kgha)) on the growth characteristics and nutrient yield of silage corn. The results are summarized as follows. 1. The plant length of silage corn was high in order of T6>T5>T4 treatment. In the leaf length, T5 and T6 treatment showed short compared to the other treatments, but they were wider than the other treatments in leaf width. In the number of leaf, T6 treatment was the highest as 14 leaves per plant, while T1 treatment showed lower than the other treatments as 12.6 leaves per plant. 2. In the stem hardness, ear length, ear width and ear full degree, soil treatment of red clover mono-culture cultivation(T6) showed higher than the other treatment as 5.1 1kg/$cm^2$, 20.8~~1, 7.7cm and 97%. respectively (P<0.01, 0.05). Ihe leaf of summer depression did not many occurrence, but T6 treatment was lower than the other treatment as 0.8 leaf per plant. 3. ADF and NDF composition were not affected by soil condition. Crude protein composition of T6 treatment was the highest as 7.8%. while TI treatment was the lowest as 6.9%. Fresh weight yield(59,083kg/ha), dry matter yield(21,743kg/ha), crude protein yield(l,369kg/ha) and TDN yield(15,800kg/ha) at T6 treatment were much more increased by 41.9, 47.5, 57.4 and 49% than TI treatment(39,410, 14,259, 827 and 10,056kg/ha).

• Food Science of Animal Resources
• /
• v.27 no.4
• /
• pp.450-456
• /
• 2007

This study was carried out investigate the effects of the period of dietary supplementation and the level of fermented mineral feed on daily body weight gain and carcass characteristics of Hanwoo steer. The dietary treatments were compared during two supplementation periods (T1:Feeding Hanwoo steers from 18 months to 25 months, T2: feeding Hanwoo steers from 7 months to 25 months), and the diets tested were of four types (0%: normal concentrate as a basal diet, 1%: 1% addition of fermented mineral feed, 2%: 2% addition of fermented mineral feed, and 3%: 3% addition of fermented mineral feed). A Total of 35 Hanwoo steers were allocated into 7 feeding groups. The daily gain of the 0% fermented mineral feed group was lower (0.64 kg) than that of the other groups (1%: 1.08 kg, 2%: 0.90 kg, 3% treatment: 0.75 kg) for the T1 period, and for the T2 period the order was 1% (0.98 kg) > 0% (0.75 kg) > 1% (0.89 kg). The amount of back fat in decreasing order was as follows: 0% (12.0) > 1% (10.8) > 2% (10.2) > 3% fermented mineral feed (7.8 mm) for the T1 period, and for the T2 period the order was C (16 mm) > T1 (13.8 mm) > T3 treatment (12.6 mm). Eye muscle area increased with increased fermented mineral feed levels. The marbling score of the T1 groups was highest with 3% fermented mineral feed (4.2), and of the T2 groups, the highest score was seen with 1% fermented mineral feed (5.6). Meat color and meat maturity were not different among all groups. The grade of meat quantity and meat quality of both the T1 and T2 groups were highest with the addition of 3% fermented mineral feed. The daily income ranged from 2,062 won to 5,265 won in the T1 groups, which were ordered as follows: 1% > 2% > 3% > 0% fermented mineral feed, and of the T2 groups, the 1% group was highest at 6,098 Won, while the 3% group was lowest at 4,590 Won.