• Computers and Concrete
• /
• v.29 no.1
• /
• pp.31-45
• /
• 2022

Experimental and numerical simulation were used to investigate the effects of angle and number of T shape non-persistent crack on the shear behaviour of crack's bridge area under uniaxial compressive test. concrete samples with dimension of 150 mm×150 mm×40 mm were prepared. Within the specimen, T shape non-persistent notches were provided. 16 different configuration systems were prepared for T shape non-persistent crack based on two and three cracks. In these configurations, the length of cracks were taken as 4 cm and 2 cm based on the cracks configuration systems. The angle of larger crack related to horizontal axis was 0°, 30°, 60° and 90°. Similar to cracks configuration systems in the experimental tests, 28 models with different T shape non-persistent crack angle were prepared in numerical model. The length of cracks were taken as 4 cm and 2 cm based on the cracks configuration systems. The angle of larger crack related to horizontal axis was 0°, 15°, 30°, 45°, 60°, 75° and 90°. Tensile strength of concrete was 1 MPa. The axial load was applied to the model. Displacement loading rate was controlled to 0.005 mm/s. Results indicated that the failure process was significantly controled by the T shape non-persistent crack angle and crack number. The compressive strengths of the specimens were related to the fracture pattern and failure mechanism of the discontinuities. Furthermore, it was shown that the compressive behaviour of discontinuities is related to the number of the induced tensile cracks which are increased by increasing the crack number and crack angle. The strength of samples decreased by increasing the crack number. In addition, the failure pattern and failure strength are similar in both methods i.e. the experimental testing and the numerical simulation methods (PFC2D).

• Journal of the Korean Applied Science and Technology
• /
• v.24 no.2
• /
• pp.149-159
• /
• 2007

In order to prepare high-solid coatings, acrylic resins, HSCs [poly (EA/EMA/2-HEMA/CLA)] that contain 90% solid, were synthesized by copolymerization of ethyl acrylate (EA), ethyl methacrylate (EMA), 2-hydroxyethyl methacrylate (2-HEMA) and caprolactone acrylate (CLA). The high-solid coatings named as CHSCs (HSCs/HDI-trimer) were prepared by the curing reaction between the acrylic resins containing 90% solid contents and the isocyanates (HDI-trimer) curing agent room temperature. The curing behavior and various properties were examined on the film coated with the both high-solid coatings. The glass transition temperatures $(T_g)$ of CHSCs increased proportionally with increasing the predicted $T_g$ value by Fox equation, and had nothing to do with the solid contents. The prepared film showed good properties for $60^{\circ}$ specular gloss, impact resistance, cross-hatch adhesion and heat resistance, and bad properties for pencil hardness, drying time, and pot-life. Among the film properties, the heat resistance was very excellent and could be explained by the introduction of functional monomers of CLA.

• Proceedings of the KSMRM Conference
• /
• 2003.10a
• /
• pp.40-40
• /
• 2003

The purpose of this study was to characterize focal hepatic lesions through pre and post ferucarbotran-enhanced T2 and T2＊-weighted imaging and to help differentiate benign and malignant lesions 대상 및 방법： Consecutive 34 patients with 52 hepatic lesions underwent MRI before and after intravenous bolus injection of ferucarbotran (Resovist Sobering, Berlin, Germany) for evaluation of focal hepatic lesions. Lesions included hemangiomas (n=17), metastases (n=12), cysts (n=10), hepatocellular carcinomas (n=8), dysplastic nodules (n=4), and focal fat deposit (n=1). T2-weighted fast spin echo (TR/TE： 4060/138) and gradient echo T2＊-weighted images(TR/TE： 140/5.3, FA = 90) were obtained according to the institutional routine imaging protocol. Lesional signal-intensity and lesion-to-liver contrast changes were measured by contrast-to-noise ratio (CNR) from region of interest.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.22 no.5
• /
• pp.1304-1308
• /
• 2008

This study was performed to evaluate the effect of persimmon leaves extract on the reactive oxygen species (ROS) in cultured melanoma cells. The B16/F10 melanoma cells were treated with various concentrations of t-butyl hydroperoxide (t-BHP). And also, the effect of persimmon leaves (PL) extract on the cytotoxicity mediated by t-BHP was done on the cell viability, tyrosinase activity and melanogenesis by colorimetric assays. In this study, t-BHP decreased cell viability in dose-dependent manner and XTT90 and XTT50 values were measured at 10 and 35 uM of PL, respectively in these culture. And also, XTT50 value was assessed as a highly toxic effect on cultured melanoma cells by the toxic criteria. In the effect of PL extract on the t-BHP-mediated cytotoxicity, PL extract significantly increased the cell viability injured by t-BHP in cultured B16/F10 melanoma cells. PL also showed the decreased tyrosinase activity and melanogenesis. From these results, it is suggested that ROS such as t-BHP showed highly toxic effect on cultured melanoma cells, and also, PL extract inhibited the tyrosinase activity and melanogenesis in cultured melanoma cells injured by ROS.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.2
• /
• pp.118-125
• /
• 2001

In this study, it was examined the characteristics of bending property of red pine(Pinus densiflora S, et Z.) related to slope of grain. At first, we have investigated the characteristics of wood species for bending property. At second, it was examined the relationships between grain angle and its related bending property. Specimens were made following to grain angle $0^{\circ}$, $30^{\circ}$, $45^{\circ}$, $60^{\circ}$, $90^{\circ}$, respectively. Dimension of wood materials was $10mm(T){\times}20mm(R){\times}350mm(L)$. Microwave irradiation time for bending process was 30, 60, 90, 120 seconds. The result of this study were as follows ; 1. Grain angle of wood was closely related to Young's modulus on bending process. In the process of bending with various grain angle, wood bending was easily proceed on the high grain angle range. 2. However, the strength of bent wood was very weak when the grain angle was high. Therefore, it was considered suitable grain angle for bending was existed. 3. The characteristics of wood properties for wood bending were very different among wood species.

• Journal of Wetlands Research
• /
• v.16 no.2
• /
• pp.269-274
• /
• 2014

The purpose of this study is to compare CT (disinfectant concentration * time) values in removing the antibiotic resistance bacteria, antibiotic resistance gene and transfer of antibiotic resistance genes. Different concentration of chlorine(C) and contact time(T) according to the removal of antibiotic resistance was calculated for each. As a result, for the 90% removal of antibiotic resistant bacteria, around 176~353 mg min/L CT values are needed. For the removal of the antibiotic resistance gene, 195~372 mg min/L CT values are required. For the 90% reduction of antibiotic resistance gene transfer by chlorine disinfection, 187~489 mg min/L CT values are needed. Based on our results, higher CT value was required for removing antibiotic resistant genes rather than antibiotic resistance bacteria.

• Microbiology and Biotechnology Letters
• /
• v.26 no.4
• /
• pp.338-344
• /
• 1998

New type of chitosan derivatives, chitosan-g-MAP, were synthesized by graft copolymerization of mono (2-methacryloyl oxyethyl) acid phosphate (MAP) into chitosan, in order to solubilize chitosan in water. Ceric ammonium nitrate was used as an initiator for graft copolymerization. The optimal conditions for graft copolymerization were determined on the basis of reaction temperature, time, and the concentration of initiator and monomer. The reaction conditions for the highest percentage of grafting were as follows: an initiator concentration, 3.5${\times}$10$\^$-3/ M; monomer concentration, 0.19 M; and reaction temperature, 40$^{\circ}C$ The reaction rate reached the maximum value after 4 hrs of reaction. Antifungal activity was tested against Candida albicans, Trichophyton rubrum and Trichophyton violaceum by using chitosan-g-MAP and two other chitosan samples which have degree of deacetylation of 70% (DA-7) and 90% (DA-90). Their antifungal activities were investigated in weak acidic range. Maximum antifungal activity of them was observed at pH 5.75. Chitosan-g-MAP inhibited thoroughly the growth of Candida albicans and Trichophyton violaceum. Howerver, DA-70 and DA-90 showed higher antifungal activities on Trichophyton rubrum than that of chitosan-g-MAP.

• Journal of Powder Materials
• /
• v.16 no.5
• /
• pp.316-325
• /
• 2009

Fe based (Fe$_{68.2}$C$_{5.9}$Si$_{3.5}$B$_{6.7}$P$_{9.6}$Cr$_{2.1}$Mo$_{2.0}$Al$_{2.0}$) amorphous powder, which is a composition of iron blast cast slag, were produced by a gas atomization process, and sequently mixed with ductile Cu powder by a mechanical ball milling process. The experiment results show that the as-prepared Fe amorphous powders less than 90 $\mu$m in size has a fully amorphous phase and its weight fraction was about 73.7%. The as-atomized amorphous Fe powders had a complete spherical shape with very clean surface. Differential scanning calorimetric results of the as-atomized Fe powders less than 90 $\mu$m showed that the glass transition, T$_g$, onset crystallization, T$_x$, and super-cooled liquid range $\Delta$T=T$_x$-T$_g$ were 512, 548 and 36$^{\circ}C$, respectively. Fe amorphous powders were mixed and deformed well with 10 wt.% Cu by using AGO-2 high energy ball mill under 500 rpm.

• Korean Journal of Poultry Science
• /
• v.10 no.2
• /
• pp.91-96
• /
• 1983

Present study was carried out to find out an optimum interval for artificial insemination in aged and poor laying hens, Brown colored, hundred and twenty commercial laying hens at about 530 days old and 20 S. C. W. Leghorn males at 580 days old were adopted Egg production rate during the experiment was 61.6% and number of eggs examined was 2,283. The intervals for the insemination were 2, 4 and 6 days for experimental groups T-1, T-2 and T-3, respectively. Eggs were collected on every 6th day and examined for fertility by candling after 5 days of incubation. Average fertility rates for T-1, T-2 and T-3 groups appeared 87.5, 81.1, and 65.1%, respectively. The fertility of T-3 group was significantly lower than those of T-1 and T-2 groups(P＜0.05). The highest fertility rate was obtained on the second day after the insemination for all groups, i. e. 90.7, 84.0 and 71.7% for T-1, T-2 and T-3, respectively. Thereafter, a tendency of gradual decline in fertility was observed. This study suggests that the optimum interval for artificial insemination in aged hens is 2 days. The fertility tended to be improved by repeated injection. For the 2-day interval group, the highest rate (98.2%) was obtained on the 6th insemination.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2007.05a
• /
• pp.36.1-36.1
• /
• 2007