• Journal of the Korean Society for Nondestructive Testing
• /
• v.5 no.2
• /
• pp.53-57
• /
• 1986

이상적인 검사는 합부판정 기준보다 큰 결함을 100%검출, 불합격시키고 그보다 작은 결함은 100% 합격시킬 수 있으나 현실적으로 이는 불가능하고 검사의 본질적인 불확실성으로 인해 때로는 합격되어야 할 결함이 불합격으로 처리되거나 (TYPE 1 ERROR라 칭함) 불합격되어야 할 결함이 합격으로 처리되기도 한다. (TYPE 2 ERROR) TYPE 1 ERROR 및 TYPE 2 ERROR를 동시에 줄이기 위해서는 검사의 불확실성을 제거하여야 하며 주어진 합부판정 기준과 검사불확실성하에서 검사를 둘러싼 총경비를 최소화시키기 위하여는 TYPE 1 ERROR와 TYPE 2 ERROR의 확률 및 그로 인한 예상 경비를 관련시켜야 한다.

• Journal of Aquaculture
• /
• v.9 no.4
• /
• pp.345-351
• /
• 1996

Mass production of resting egg of the rotifer, Brachionus plicatilis was carried out in 1 $m^3$ tank for L-type rotifer and in 1 $m^3$ and 4 $m^3$ tank for S-type rotifer. L-type rotifer was fed on concentrated Chlorella + baker's yeast and only baker's yeast for 15 days. S-type rotifer was fed on concentrated Chlorella in 1 $m^3$ tank for 7 days and frozen Chlorella + baker's yeast in 4 $m^3$ for $6\~8$ days. Total number of resting egg and number of resting egg from $10^8$ rotifers and 1 g dry weight diet for L-type rotifer fed on Chlorella + baker's yeast were $54.5{\times}10^6$ eggs, $30.5{\times}10^6$ eggs and $100{\times}10^3$ eggs, respectively. These were higher than those of rotifer fed on baker's yeast only. Total number of resting egg and number of resting egg from $10^8$ rotifers and 1 g dry weight diet for S-type rotifer fed on concentrated Chlorella in 1 $m^3$ tank were $50\~104{\times}10^6$ eggs, $47\~82{\times}10^6$ eggs and $136\~260{\times}10^3$ eggs, respectively. In 4 $m^3$ tank with frozen Chlorella + baker's yeast, these were $149\~567{\times}10^6$ eggs, $36\~123{\times}10^6$ eggs and $131\~338{\times}10^3$ eggs, respectively. This result suggests that S-type rotifer are better than L-type rotifer for the mass production of resting egg of the Korean rotifer.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.37 no.5
• /
• pp.90-100
• /
• 1995

This study was performed to develop the lightweight concrete using synthetic lightweight aggregate and natural coarse aggregate. Mixing ratios were three types, the first type was mixed cement and synthetic lightweight fine aggregate (Type CP), the second type was mixed cement, synthetic lightweight fine aggregate and synthetic lightweight coarse aggregate (Type CPE), the third type was mixed cement, synthetic lightweight fine aggregate and natural coarse aggregate (Type CPN). The results of this study are summarized as follows ; 1. The W/C of each mixing ratio was increased with increase of the amount of cement used, and it was shown higher in order of Type CP, CPN, CPE. 2. The unit weight of Type CP, CPE and CPN was 1.473~1.647g/cm$^3$, 1.467~1.622g/cm$^3$ and 1.658~1 .838g/cm$^3$, respectively. And the absorption ratio was approximately 20%, which was higher than that of the normal cement concrete. 3. The compressive strength of Type CP was shown 178 ~249kg/cm2, Type CPE was shown 149~241kg/cm$^2$ and Type CPN was shown 196~297kg/cm$^2$, respectively. Each strength ratio was smaller than that of the normal cement concrete. 4. The pulse velocity of Type CP, CPE and CPN was 2, 688~3, 240m/sec, 2, 981~3, 324m/sec and 2, 989 ~ 3, 545m/sec, respectively. And it was increased with increase of strength and unit weight. 5. The length change ratio at 28 days was in the range of 0.057~0.077%, and earlier length change ratio was higher than that of the later.

• Journal of Environmental Science International
• /
• v.23 no.7
• /
• pp.1349-1358
• /
• 2014

This study suggests plan of green space management based on the result of research apprehending the characteristic through sorting types of city thermal environment targeting summer which thermal pollution is the most serious. Considering anthropogenic heat, development level of wind road, thermal environment, as a result of types of thermal environment process, it is appeared 36 types, and 10 types is relevant of this research subject. Type I-1, size of building is large, artificial covering area is wide, and thermal load of anthropogenic heat is high, type II-1, development condition of wind road is incomplete as IIlevel, entering cold air is difficult and thermal management and improvement is needed area. Type III-1, scale is large and it is area of origin of cold air, development level of wind road is mostly favorable, type III-2 is revealed as smaller scale than III-1, and small area of origin of cold air. Type IV, anthropogenic heat is $81{\sim}150W/m^2$, average, but development function of wind road is very favorable. Type V, large area of thermal load and the origin of cold air are distributed as similar ratio, and level of development function of wind road is revealed as II level. According to standard of type classification of thermal environment, as a result of suggesting plan of green space management and biotops area ratio, type I-1 is buffer green space and waterway creation, goal biotops area ratio 35%, type II-1 afforestation in site and goal biotops area ratio 40%, type III-1, preservation plan to display the current function continuously is requested. Type IV suggests afforestation of stream current, and type V suggests quantitative increase of green space and goal biotops area ratio 45%.

• Bulletin of the Korean Mathematical Society
• /
• v.36 no.1
• /
• pp.25-31
• /
• 1999

Let $\nu$ be a positive Borel measure on a space of homogeneous type (X, d, $\mu$), satisfying the doubling property. A condition on a weight $\omega$ for whixh a maximal operator $M\nu f$(x) defined by M$mu$f(x)=supr>0{{{{ { 1} over {ν(B(x,r)) } INT _{ B(x,r)} │f(y)│d mu (y)}}}}, is of weak type (p,p) with respect to (ν, $omega$), is that there exists a constant C such that C $omega$(y) for a.e. y$\in$B(x, r) if p=1, and {{{{( { 1} over { upsilon (B(x,r) } INT _{ B(x,r)}omega(y) ^ (-1/p-1) d mu (y))^(p-1)}}}} C, if 1$infty$.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.6
• /
• pp.708-719
• /
• 2007

Glutathione S-transferase genotypes GSTT1, GSTM1 and GSTP1 were characterized in 104 healthy male and female subjects and compared with parameters of oxidative stress at the level of DNA and lipids, with antioxidant enzymes, and with plasma antioxidants in smokers and non.smokers. Of the 104 subjects studied, 57.4% were GSTT1 present and 47.6% were GSTM1 present. The GSTP1 polymorphisms a and b were represented as follows: a/a, 75.5%; a/b, 21.6%; b/b type, 2.9%. The GSTT1 null genotype was associated with decreased glutathione in erythrocytes and elevated lymphocytes DNA damage. GST-Px was higher in GSTT1 null compared with GSTT1 present type. The homozygous GSTP1 genotype was not associated with any antioxidant status or DNA damage. The difference in plasma ${\alpha}$-carotene and erythrocytes GSH-Px and GST activities between smokers and non-smokers was detected in the GSTT1 null genotype. Plasma ${\gamma}$-tocopherol and ${\beta}$-carotene decreased significantly in smokers having GSTM1 null genotype. When GSTT1 and GSTM1 were combined, plasma lycopene and erythrocyte GST were reduced in smokers in both null types of these genes. As for GSTP1 genotype, plasma ${\alpha}$-carotene and erythrocytes GSH-Px decreased significantly in smokers with GSTP1 b/b, while erythrocytes GSH-Px activities decreased in smokers with GSTP1 a/b. The different ${\beta}$-carotene level between smokers and non-smokers was seen with both GSTP1 a/a and a/b genotype. It seems that polymorphisms in the phase II metabolizing enzyme glutathione S-transferase may be important determinants of commonly measured biomarkers.

• Atmosphere
• /
• v.32 no.4
• /
• pp.353-365
• /
• 2022

This paper evaluates precipitation forecast skill of Global/Regional Integrated Model system (GRIMs) over South Korea in a boreal winter from December 2013 to February 2014. Three types of precipitation are classified based on development mechanism: 1) convection type (C type), 2) low pressure type (L type), and 3) orographic type (O type), in which their frequencies are 44.4%, 25.0%, and 30.6%, respectively. It appears that the model significantly overestimates precipitation occurrence (0.1 mm d^-1) for all types of winter precipitation. Objective measured skill scores of GRIMs are comparably high for L type and O type. Except for precipitation occurrence, the model shows high predictability for L type precipitation with the most unbiased prediction. It is noted that Equitable Threat Score (ETS) is inappropriate for measuring rare events due to its high dependency on the sample size, as in the case of Critical Success Index as well. The Symmetric Extreme Dependency Score (SEDS) demonstrates less sensitivity on the number of samples. Thus, SEDS is used for the evaluation of prediction skill to supplement the limit of ETS. The evaluation via SEDS shows that the prediction skill score for L type is the highest in the range of 5.0, 10.0 mm d^-1 and the score for O type is the highest in the range of 1.0, 20.0 mm d^-1. C type has the lowest scores in overall range. The difference in precipitation forecast skill by precipitation type can be explained by the spatial distribution and intensity of precipitation in each representative case.

• Restorative Dentistry and Endodontics
• /
• v.18 no.1
• /
• pp.1-26
• /
• 1993

The purpose of this study was to investigate the effect of acid etching on the surface appearance and fracture toughness of five glass ionomer cements. Five kinds of commercially available glass ionomer cements including chemical curing filling type, chemical curing lining type, chemical curing metal reinforced type, light curing tilling type and light curing lining type were used for this study. The specimens for SEM study were fabricated by treating each glass ionomer cement with either visible light curing or self curing after being inserted into a rubber mold (diameter 4mm, depth 1mm). Some of the specimens were etched with 37% phosphoric acid for 0, 15, 30, 60, go seconds, at 5 minutes, 1 hour and 1 day after mixing of powder and liquid. Unetched ones comprised the control group and the others were the experimental groups. The surface texture was examined by using scanning electron microscope at 20 kV. (S-2300, Hitachi Co., Japan). The specimens for fracture toughness were fabricated by curing of each glass ionomer cement previously inserted into a metal mold for the single edge notch specimen according to the ASTME399. They were subjected to a three-point bend test after etching for 0, 30, 60, and 90 seconds at 5 minutes-, 1 hour-and 1 day-lapse after the fabrication of the specimens. The plane strain fracture toughness ($K_{IC}$) was determined by three-point bend test which was conducted with cross-head speed of 0.5 mm/min using Instron universal testing machine (Model No. 1122) following seven days storage of the etched specimens under $37^{\circ}C$, 100% humidity condition. Following conclusions were drawn. 1. In unetched control group, crack was present, but the surface was generally smooth. 2. Deterioration of the surface appearance such as serious dissolving of gel matrix and loss of glass particles occured as the etching time was increased beyond 15 s following Immediate etching of chemical curing type of glass ionomer cements. 3. Etching after 1 h, and 1 d reduced surface damage, 15 s, and 30s etch gave rough surface appearance without loss of glass particle of chemical curing type of glass ionomer cements. 4. Light curing type glass ionomer cement was etched by acid, but there was no difference in surface appearances according to various waiting periods. 5. It was found that the value of plane stram fracture toughness of glass ionomer cements was highest in the light curing filling type as $1.79\;MNm^{-1.5}$ followed by the light curing lining type, chemical curing metal reinforced type, chemical curing filling type and chemical curing lining type. 6. The value of plane stram fracture toughness of the chemical curing lining type glass ionomer cement etched after 5 minutes was lower than those of the cement etched after 1 hour or day or unetched (P < 0.05). 7. Light curing glass ionomer cement showed Irregular fractured surface and chemical curing cement showed smooth fractured surface.

• Korean Journal of Mathematics
• /
• v.28 no.1
• /
• pp.105-121
• /
• 2020

The principal objective of this paper is to introduce the ideas of relative 𝜑-type, relative 𝜑-weak type of entire functions of several complex variables and study some growth properties concerning them.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.9
• /
• pp.2781-2786
• /
• 2014

Human ${\alpha}_1$-antitrypsin (${\alpha}_1$-AT) is a natural inhibitor of neutrophil elastases and has several dozens of genetic variants. Most of the deficient genetic variants of human ${\alpha}_1$-AT are unstable and cause pulmonary emphysema. However, the most clinically significant variant, Z-type ${\alpha}_1$-AT, exhibits retarded protein folding that leads to accumulation of folding intermediates. These aggregate within the endoplasmic reticulum (ER) of hepatocytes, subsequently causing liver cirrhosis as well as emphysema. Here, we studied the role of an ER folding assistant protein Cpr5p on Z-type ${\alpha}_1$-AT folding. Cpr5p was induced > 2-fold in Z-type ${\alpha}_1$-AT-expressing yeast cells compared with the wild type. Knockout of CPR5 exacerbated cytotoxicity of Z-type ${\alpha}_1$-AT, and re-introduction of CPR5 rescued the knockout cells from aggravated cytotoxicity caused by the ${\alpha}_1$-AT variant. Furthermore, Cpr5p co-immunoprecipitated with Z-type ${\alpha}_1$-AT and facilitated its protein folding. Our results suggest that protein-folding diseases may be suppressed by folding assistant proteins at the site of causal protein biosynthesis.