• 소성∙가공
• /
• 제15권4호
• /
• pp.289-294
• /
• 2006

To reduce automobile parts weight, TWB(tailored welded blank) forming is widely used in panel forming. But products used TWB forming process have many defect, wrinkle, crack and springback. So study of TWB forming process character is very important. In this study one of the current problems of TWB forming was analyzed, especially for the try-out process of inner door panel without frame. A comparison was made between actual measurements and prediction of forming analysis for formability and springback. Also a new analysis die model which have additional plane on die surface was proposed to correct result of forming analysis. This proposed method overcomes the difference for TWB forming result between try-out and analysis.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 추계학술대회논문집
• /
• pp.132-137
• /
• 2004

In order to reduce automobile parts weight, TWB(Tailored welded blank) forming is widely used in the forming of car panel, such as door inner, side outer panels. In this study, one of the current problems of TWB forming was analyzed, especially for the try-out process of TWB door inner panel without frame. A comparison was made between actual panel measurements and results of forming analysis for formability and springback.

• 대한기계학회논문집A
• /
• 제36권10호
• /
• pp.1221-1226
• /
• 2012

핫 스탬핑은 오스테나이트 변태 온도 이상에서 프레스 성형 후 급속히 냉각되는 고강도 부품을 제조하는 성형 방법이다. 매우 적은 양의 보론 성분을 가지고 있는 보론강은 핫 스탬핑에 사용되는 재료 중의 하나이다. 본 연구의 목적은 열처리 조건에 따르는 기계적 성질과 에릭슨 커핑 시험에 의하여 성형성을 조사하는 것이다. 다양한 온도에서 다이��칭은 대기 시간을 달리하여 실시하였다. 1173 K-0s에서 ��칭 후 TWB는 1203 MPa의 인장 강도를 얻었다. 이것은 모재 인장강도(1,522 MPA)의 79 %이다. 금형 온도(298, 523, 673 K)에 따른 보론강 TWB의 성형성은 차이가 크지 않았다. 그러나 성형 속도가 증가함에 따라 성형성이 감소하는 것을 확인할 수 있었다.

• 한국레이저가공학회지
• /
• 제17권2호
• /
• pp.11-18
• /
• 2014

This research was conducted as a fundamental study to apply tailored blank welding technique into automotive production process. Specially we tried to apply the TWB technique to exhaust system. The materials used in this work were ferritic 439 stainless steel sheet with a thickness of 1.2mm and 0.8mm. Welding tests were conducted for BOP test and dissimilar thickness (0.8 to 1.2t) cases. Major process parameters were position of focus, travel speed, shielding gas and joint (gap) condition. As a result, there are nothing significant welding characteristic compare with TWB of carbon steel. Stainless steel shows the good weldability and mechanical properties (tensile, hardness and forming strength) also shows high level. Just problem is gap condition. However, also in this case, it shows not only good forming strength but also base metal fracture after tensile test. And to conclude, it is good opportunity to make lightweight design muffler using TB welding technique.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1312-1316
• /
• 2007

Strip casted and rolled magnesium sheet is become exiting material for car manufacturer, due to its better formability and specific strength compare with conventional extruded sheet. TWB technology was attractive for car body designer, because it saves the weight of the car without strength loss. In this study, the laser welding performance of magnesium sheet was investigated for Mg TWB panel manufacturing. The material was strip casted and rolled magnesium alloy sheet contains 3 wt% Al and 1 wt% Zn (AZ31). Lamp pumped Nd:YAG laser of 2kW was used and its laser light was delivered by optical fiber of 0.6mm core diameter to material surface with focusing optics of 200mm focal length for TWB welding. The microstructure of weld bead was investigated to check internal defects such as inclusion, porosity and cracks. Also mechanical properties and formability were evaluated for press forming of car body. For the results, there was no crack but inclusion or porosity on weld at some conditions.The tensile strength of weld was over 95% of base metal. Inner and outer panel of engine hood were press formed and assembled at elevated temperature.

• 한국생산제조학회지
• /
• 제9권5호
• /
• pp.80-86
• /
• 2000

The Tailor Welded Blanks(TWB) are using various materials (different thickness, strength and different materials) can be welded together prior to the forming process. Therefore, TWB applications have become little by little important in automobile industries, because it has more light weight and process reduction. A burnish area is very important for TWB using laser welding. In this paper, evaluated failure criterion, effect of clearance and distance of between pad and punch by computer simulation. We used element separation method for fracture. And applied a plastic strain to failure criterion. According to the analysis results, we obtain failure criterion, when plastic strain is 2.0. The burnish area and clearance were inverse proportional.

• 열처리공학회지
• /
• 제25권6호
• /
• pp.283-291
• /
• 2012

In order to increase the anti-oxidation property during the tailor welding blanked hot press forming process for a high strength boron steel sheet, we performed a different coating method on the boron-steel sheet such as 87% Al - 13% Si and Fe - 8.87 Zn dipping plating procedure. However, during laser welding process, the Al-Si coated steel sheet has showed a low tensile strength and about half value of elongation than the original boron-steel sheet. Aluminum and silicon, elements of coating layer were diffused into the boron-steel matrix and have shown a low strength result than non-coated specimen. On the other hand, Zinc-coated boron-steel has expectedly showed a excellent tensile strength and micro-harness value in the welded area like original boron-steel.

• 소성∙가공
• /
• 제8권5호
• /
• pp.429-436
• /
• 1999

In sheet metal forming , forming limit diagram is very important to design and analyze of sheet metal forming process. Recently tailor welded blanks of different thickness and different material and strength combinations are used widely in automobile industry to reduce car manufacturing cost. In order to analyze the forming characteristics of tailored welded blanks, we have investigated the forming limit dia-grams for 3 kinds of different material using mash seam and laser welding experimentally and dis-cussed for the characteristics of forming for tailor welded blanks. It is concluded that forming limit dia-gram for the different material combination TWB locates between FLD of the thinner base material sheet and the thicker ones.

• 한국산학기술학회논문지
• /
• 제19권5호
• /
• pp.184-189
• /
• 2018

최근에 안전기준과 환경규제 강화의 증대로 인해, 차체의 경량화에 대한 연구가 지속적으로 증가하고 있다. 고강도강의 응용은 가장 보편화 된 차체 경량화의 효과적인 방법 중에 하나이다. TWB(Tailor Welded Blank)는 다양한 두께와 용접을 사용하여 부분적인 강도와 경량화를 만족시키는 주요한 공법으로 활용되고 있다. 그러나 추가적인 용접공정으로 인해 판재간의 용접성이 중요하고 용접부에 대한 품질관리가 중요하다. 이점을 개선하기 위해, TRB(Tailor Rollded Blank)공법이 제안되었다. TRB는 롤러 압력을 조절하여 판재의 두께를 다르게 하고, 용접을 사용하는 TWB 공법보다 추가적인 용접공정이 없기 때문에 생산 비용적인 측면에서 훨씬 더 효율적이다. 본 연구에서는 Blank의 압연 영향을 조사하기 위해 스탬핑용 고강도강 TRB 판재의 성형성을 분석하였다. 성형성을 분석하기 위해, TRB 판재에서 0.8 mm, 1 mm의 두께를 갖는 부분을 채취하여 시험하였다. 시편에 새겨진 그리드마킹의 변형도를 분석하여 변형률을 조사하였고, 0.8 mm와 1.0 mm의 두께를 갖는 TRB 시편으로 Erichsen 시험을 한 후에 FE분석을 활용하여 성형성과 고유진동수를 비교하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 춘계학술대회논문집
• /
• pp.159-162
• /
• 2000

Wrinkles and shape distortions are generated during the forming of B-pillar(or center pillar) which is a component of the automobile side-frame. The stretch flanging modes at the joining part of the B-pillar and the roof-rail or the side-still give rise to forming problems when taior-welded blanks are applied to the side-frames. The authors simplified B-pillar lower part to T shaped section to investigate the forming behaviors. Three of die step locations and two of blank types were tested to show the effects of weld line locations and edge conditions on he forming of tailor welded blanks. The heights of body wrinkles and the strain distribution in the stretch flanged area were measured and compared.