• Progress in Medical Physics
• /
• v.23 no.4
• /
• pp.252-260
• /
• 2012

The reduction of radiation dose from x-ray is a main concern in computed tomography (CT) imaging due to the side-effect of the dose on human body. Recently, the various methods for dose reduction have been studied in CT and one of the method is a iterative reconstruction based on total variation (TV) minimization at few-views data. In this paper, we evaluated the image quality between total variation (TV) minimization algorithm and Feldkam-Davis-kress (FDK) algorithm in micro computed tomography (CT). To evaluate the effect of TV minimization algorithm, we produced a cylindrical phantom including contrast media, water, air inserts. We can acquire maximum 400 projection views per rotation of the x-ray tube and detector. 20, 50, 90, 180 projection data were chosen for evaluating the level of image restoration by TV minimization. The phantom and mouse image reconstructed with FDK algorithm at 400 projection data used as a reference image for comparing with TV minimization and FDK algorithm at few-views. Contrast-to-noise ratio (CNR), Universal quality index (UQI) were used as a image evaluation metric. When projection data are not insufficient, our results show that the image quality of reconstructed with TV minimization is similar to reconstructed image with FDK at 400 view. In the cylindrical phantom study, the CNR of TV image was 5.86, FDK image was 5.65 and FDK-reference was 5.98 at 90-views. The CNR of TV image 0.21 higher than FDK image CNR at 90-views. UQI of TV image was 0.99 and FDK image was 0.81 at 90-views. where, the number of projection is 90, the UQI of TV image 0.18 higher than FDK image at 90-views. In the mouse study UQI of TV image was 0.91, FDK was 0.83 at 90-views. the UQI of TV image 0.08 higher than FDK image at 90-views. In cylindrical phantom image and mouse image study, TV minimization algorithm shows the best performance in artifact reduction and preserving edges at few view data. Therefore, TV minimization can potentially be expected to reduce patient dose in clinics.

• Journal of Biomedical Engineering Research
• /
• v.32 no.3
• /
• pp.257-263
• /
• 2011

Sparse-view CT imaging is considered to be a solution to reduce x-ray dose of CT. Sparse-view CT imaging may have severe streak artifacts that could compromise the image qualities. We have compared quality of sparseview images reconstructed with two representative iterative reconstruction techniques, SIRT and TV-minimization, in terms of image error and edge preservation. In the comparison study, we have used the Shepp-Logan phantom image and real CT images obtained with a micro-CT. In both phantom image and real CT image tests, TV-minimization technique shows the best performance in error reduction and preserving edges. However, the excessive computation time of TV-minimization is a technical challenge for the practical use.

• IEIE Transactions on Smart Processing and Computing
• /
• v.4 no.6
• /
• pp.413-421
• /
• 2015

Regularized Blind Deconvolution is a problem applicable in degraded images in order to bring the original image out of blur. Multichannel blind Deconvolution considered as an optimization problem. Each step in the optimization is considered as variable splitting problem using an algorithm called Alternating Minimization Algorithm. Each Step in the Variable splitting undergoes Augmented Lagrangian method (ALM) / Bregman Iterative method. Regularization is used where an ill posed problem converted into a well posed problem. Two well known regularizers are Tikhonov class and Total Variation (TV) / L2 model. TV can be isotropic and anisotropic, where isotropic for L2 norm and anisotropic for L1 norm. Based on many probabilistic model and Fourier Transforms Image deblurring can be solved. Here in this paper to improve the performance, we have used an adaptive regularization filtering and isotropic TV model Lp norm. Image deblurring is applicable in the areas such as medical image sensing, astrophotography, traffic signal monitoring, remote sensors, case investigation and even images that are taken using a digital camera / mobile cameras.

• Journal of Internet Computing and Services
• /
• v.8 no.3
• /
• pp.1-7
• /
• 2007

Since the DirectTV started its digital broadcasting services in 1994 for the first time in the U.S., digital broadcasting widened its services in many areas. In korea, TIT(Transport Information Technology) based IP-TV services have been provided in Saemaeul trains and some sections of subway trains. But the software systems for the service performed in alternated fashions and suffered from many problems such as suspension, memory leaking and overflow. These problems increased playback loss time and resulted in bad reliabilities. In this paper, a software TIT monitor is designed and implemented for the TIT system in physically poor environments. The designed system formalized monitoring time intervals for effective monitoring. Through the real experiments, playback time is improved in 14% comparing to existing system.

• Journal of Biomedical Engineering Research
• /
• v.35 no.5
• /
• pp.132-141
• /
• 2014

In an ordinary CT scan, a large number of projections with full field-of-view (FFOV) are necessary to reconstruct high resolution images. However, excessive x-ray dosage is a great concern in FFOV scan. Region-of-interest (ROI) CT or sparse-view CT is considered to be a solution to reduce x-ray dosage in CT scanning, but it suffers from bright-band artifacts or streak artifacts giving contrast anomaly in the reconstructed image. In this study, we propose an image reconstruction method to eliminate the bright-band artifacts and the streak artifacts simultaneously. In addition to the ROI scan for the interior projection data with relatively high sampling rate in the view direction, we get sparse-view exterior projection data with much lower sampling rate. Then, we reconstruct images by solving a constrained total variation (TV) minimization problem for the interior projection data, which is assisted by the exterior projection data in the compressed sensing (CS) framework. For the interior image reconstruction assisted by the exterior projection data, we implemented the proposed method which enforces dual data fidelity terms and a TV term. The proposed method has effectively suppressed the bright-band artifacts around the ROI boundary and the streak artifacts in the ROI image. We expect the proposed method can be used for low-dose CT scans based on limited x-ray exposure to a small ROI in the human body.

• Journal of Communications and Networks
• /
• v.18 no.1
• /
• pp.50-64
• /
• 2016

Nowadays, smart meter (SM) technology is widely effectively used. In addition, power allocation (PA) and channel selection (CS) are considered problems with many proposed approaches. In this paper, we will suggest a specific scenario for an SM configuration system and show how to solve the optimization problem for transmission between SMs and the data concentrator unit (DCU), the center that collects the data from several SMs, via simulation. An efficient CS with PA scheme is proposed in the TV white space system, which uses the TV band spectrum. On the basic of the optimal configuration requirements, SMs can have a transmission schedule and channel selection to obtain the optimal efficiency of using spectrum resources when transmitting data to the DCU. The optimal goals discussed in this paper are the maximum capacity or maximum channel efficiency and the maximum allowable power of the SMs used to satisfy the quality of service without harm to another wireless system. In addition, minimization of the interference to the digital television system and other SMs is also important and needs to be considered when the solving coexistence scenario. Further, we propose a process that performs an interference analysis scheme by using the spectrum engineering advanced Monte Carlo analysis tool (SEAMCAT), which is an integrated software tool based on a Monte-Carlo simulation method. Briefly, the process is as follows: The optimization process implemented by genetic evolution optimization engines, i.e., a genetic algorithm, will calculate the best configuration for the SM system on the basis of the interference limitation for each SM by SEAMCAT in a specific configuration, which reaches the solution with the best defined optimal goal satisfaction.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.151-153
• /
• 2020

PFC( Power Factor Corrector)회로의 목적은 입력전류의 역률 개선을 목적으로 널리 사용되고 있다. 그리고 입/출력 파워의 균형을 위해 대용량의 출력Cap이 사용되며 주로 전해액이 포함된 부품을 사용한다. 그러나 사용 되는 전해Cap은 AC-DC 변환회로의 수명시간을 결정지으며 이를 사용하는 전자제품의 전체 수명을 반영하게 된다. 본 연구는 출력Cap용량을 최소와시키며 이를 대체 할 수 있는 Film Cap을 사용하여 제품의 전체 수명시간을 개선시키는데 목적이 있으며 다이나믹 특성의 부하와 서지성 낙뢰 및 과전압 대책에 대한 해결방안을 실제 시스템에서 구현하고자 한다. 또한 입력 서지 및 다이나믹 부하에 대한 개선 회로를 확인하고 이론적 결과는 200W LED TV에서 검증한다.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.29 no.3
• /
• pp.105-124
• /
• 2011

TFT-LCD consists of LCD panel on the top, circuit unit on the side and BLU on the bottom. The recent development issues of BLU-dependent TFT-LCD have been power consumption minimization, slimmerization and size maximization. As a result of this trend, LED is adopted as BLU instead of CCFL to increase brightness and to reduce thickness. In liquid crystal displays, the light efficiency is below 10% due to the loss of light in the path from a light source to an LCD panel and presence of absorptive polarizer. This low efficiency results in low brightness and high power consumption. One way to circumvent this situation is to use a reflective polarizer between backlight units and LCD panels. Since a nano-wire grid polarizer has been known as a reflective polarizer, an idea was proposed that it can be used for the enhancement of the brightness of LCD. The use of reflective polarizing film is increasing as edge type LED TV and 3D TV markets are growing. This study has been carried out to fabrication of the nano-wire grid polarizer(NWGP) and investigated the brightness enhancement of LCD through polarization recycling by placing a NWGP between an c and a backlight unit. NWGPs with a pitch of 200nm were fabricated using laser interference lithography and aluminum sputtering and wet etching. And The NWGP fabrication process was using by the UV imprinting and was applied to plastic PET film. In this case, the brightness of an LCD with NWGPs was 1.21 times higher than that without NWGPs due to polarization recycling.

• Journal of Broadcast Engineering
• /
• v.9 no.4 s.25
• /
• pp.357-370
• /
• 2004

In this paper we propose Digital Signal Processing (DSP) techniques for the Equalization Digital On-Channel Repeater(EDOCR) in the ATSC digital TV (DTV) System. DSP techniques consist of demodulation. baseband equalization, and remodulation. Since the time delay caused by signal processing in the EDOCR can seriously affect the performance of ATSC legacy receivers, it is required that the processing time should be minimized as much as possible. To achieve this goal, we focus on the reduction of the EDOCR's time delay with the minimization of its performance degradation. In addition, we present recommended proper parameters for hardware implementation based on extensive simulation result.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.11 no.2
• /
• pp.74-85
• /
• 2003

The purpose of this study is to investigate present situation of recovery and treatment of waste home appliances, and to supply basic data for active reuse and recycling of waste home appliances. Among waste home appliances, refrigerator comprise 30.7%, television 37.8%, washing machine 22.9% and air conditioner 0.3%. Local government collected 46.2% of waste home appliances, producer and agent collected 49.7%, recycling center 4.1%. Seventeen percentage of waste home appliances are reused, 65% are recycled, and 18% are landfilled or incinerated. To improve the recycling activity of waste of home appliances, it is important to establish private reuse and recycling organization. It is also necessary to improve waste deposit and refund system for efficient recycling by decent financial support. Extension of a term of usage is another method to minimize waste home appliances. Finally, intensive education for consumer is necessary for waste minimization. Some portion of recycling and treatment cost can be allocated to the local government and large private business can shred and recycle waste home appliances.