• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.12
• /
• pp.1209-1213
• /
• 2010

This paper presents a technique for an Android mobile device to best utilize its surrounding external display device such as high-definition TV, in order to overcome the size and resolution limitation of the small LCD in the mobile device. Unlike current techniques that simply expand the LCD screen image to an external large display, our technique dynamically changes the resolution adapting to capability of the external display. And, the original screen become a remote controller.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.4
• /
• pp.62-70
• /
• 2015

Recently the demand for projected capacitance touch screens is sharply growing especially for large screens for medical devices, PC monitors and TVs. Large touch screens in general need a controller of higher complexity. They usually have a larger number of driving and sensing lines, and hence it takes longer to scan one frame for touch detection leading to a low frame scan rate. In this paper, a novel touch screen control technique is presented, which scans each frame in two steps of simultaneous multi-channel driving. The first step is to drive all driving lines simultaneously and determine which sensing lines have any touch. The second step is to sequentially rescan only the touched sensing lines, and determine exact positions of the touches. This technique can substantially increase the frame scan rate. This technique has been implemented using an FPGA and an AFE board, and tested using a commercial 23-inch touch screen panel. Experimental results show that the proposed technique improves the frame scan rate by 8.4 times for the 23-inch touch screen panel over conventional methods.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.7 s.250
• /
• pp.741-749
• /
• 2006

For last couple of decades, uses of TFI-LCDs have been expanded to many FPD(Flat Panel Display) applications including mobile displays, desktop monitors and TVs. Furthermore, there has been growing demand for increasingly larger LCD TVs. In order to meet this demand as well as to improve productivity, LCD manufactures have continued to install larger-generation display fabrication facilities which are capable of producing more panels and larger displays per mother glass(substrate). As the size of mother glass becomes larger, a robot required to handle the glass becomes bigger accordingly, and its end effectors(arms) are extended to match the glass size. With this configuration, a considerable static deflection occurs at the end of the robot arms. In order to stack maximum number of mother glasses on a given footprint, the static deflection should be compensated. This paper presents a novel static deflection compensation algorithm. This algorithm requires neither measurement instrument nor additional vertical axis on the robot. It is realized by robot controller software. The forward and inverse kinematics considering compensation always guarantees a unique solution, so the proposed algorithm can be applied to an arbitrary robot position. The algorithm reduced static deflection by 40% in stationary robot state experiment. It also improved vertical path accuracy up to 60% when the arm was running at its maximum speed. This algorithm has been commercialized and successfully applied to a seventh-generation LCD glass-handling robot.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.2
• /
• pp.48-53
• /
• 2010

RC(Remote Control) is a technology that can efficiently control and transfer a variety of user commands to CEs. However, the existing RCs have been required various additional features such as communication between CEs, extension of communication range, low power-consumption and bi-directional communication according to the advent of new types of CE devices and its enhanced performance. Even though RC controller has many customers' requests, it is not a simple solution because most legacies work on IR-based RC. In this paper, we propose RF4CE-based Universal Remote Control Framework using Smartphone in order to solve the many constraints of IR legacies. The proposed R-URC system is designed by RF4CE platform which is a kind of de-facto standard for CE remote control communication. From the verification scenarios using various CEs and smart phone, we can see that the proposed R-URC shows the good practical usage in terms of contents sharing and smart CE control.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.4
• /
• pp.879-888
• /
• 2017

Recently, the Smart household appliances to provide Smart services have been actively spreaded by providing IoT(Internet of Things). Also, the appliances which Wi-Fi and Bluetooth can directly control are preferred. But until now, the most household appliances are based on IR(InfraRed) and the each procotols of them are different. In this paper, to solve these problems, we suggested the system to control both smart appliances and general appliances by using Smart phone. The system is "Wi-Fi to IR" gateway which receives the Wi-Fi signal to convert to IR signal and transmit it. Also, we made the remote control function in specific brands' appliances possible to most brands without limitation and tried to control not only one remote controller for one TV brand but also for all brand without limitation.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.7
• /
• pp.1929-1940
• /
• 1999

In this paper a VLSI design for the automatic magnetizing and inspection system has been presented. This is a design of a peripheral controller, which magnetizes CRTs and computer monitors and controls the automatic inspection system. We implemented a programmable peripheral interface(PPI) circuit of the control and protocol module for the magnetizer controller by using a 0.8um CMOS SOG technology of ETRI. Most of the PPI functions have been confirmed. In the conventional method, the propagation/ramp delay model was used to predict the delay of cells, but used to model on only a single cell. Later, a modified "linear delay predict model" was suggested in the LODECAP(LOgic DEsign CAPture) by adding some factors to the prior model. But this has not a full model on the delay chain. In this paper a new " delay predict equation" for the design of the timing control block in PPI system has been suggested. We have described the detail method on a design of delay chain block according to the extracted equation and applied this method to the timing control block design. And we had descriptions on the other blocks of this system.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.284-287
• /
• 2004

본 논문의 목표는 일체형 디지털 TV에서 디지털 방송 수신과 방송 컨텐츠를 녹화, 저장, 재생이 가능할 뿐만 아니라 조만간 시작될 데이터 방송을 수신할 수 있는 내장형 디지털 방송수신 및 개인 비디오 저장 시스템 Platform 개발이다. 디지털 방송과 데이터방송 수신이 가능한 Set-Top Box 기능, 수신된 방송의 저장 및 재생이 가능한 PVR 기능을 지원할 수 있는 시스템의 구조를 설계하였다. 고품질 디지털 방송 서비스가 본격적으로 시작됨에 따라 디지털 방송 수신기와 PVR 기능이 복합된 제품의 수요가 증가할 것으로 예상되며 이러한 고성능 복합시스템은 필수적일 것이다. 이러한 기능을 수행하기 위하여 시스템 제어를 위한 CPU로는 PMC-Sierra 사의 MIPS Architecture에 기반을 둔 RM5231을 채택하고, Teralogic 사의 TL811 System Controller을 채택하여 시스템을 이루고 있는 각종 디바이스를 구성하고, MPEG-2 Demux/Decoding을 위해 Teralogic TL851 Graphics & Display Processor을 채택하였다. 개발된 시스템을 테스트하기 위하여 현재 각 방송사들의 시험 방송을 수신하고 PVR 기능을 테스트하였다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.9
• /
• pp.1493-1496
• /
• 2016

This paper proposes a system for reducing the standby power consumption in using the consumer electronic devices such as a television, a home theater, a set-top box, or a DVD player. The system is consisted of a flyback converter, monitoring circuits, a relay and a micro-processor. The proposed system can reduce the standby power consumption by disconnecting the AC input and the consumer devices can be turned on with a remote control. The proposed standby power system consumes the low power to receive the infrared signal from the remote controller. Furthermore, a electronic double layer capacitor is used to store the energy with high efficiency. The proposed power system can operate the 플라이백 converter to charge the electronic double layer capacitor and connect the AC input to the consumer electronic devices. The proposed power circuit can reduce the standby power consumption in AV devices without increasing the cost. The prototype is implemented to verify the system with the commercialized products.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.5
• /
• pp.143-150
• /
• 2017

In this paper, we propose a novel motion recognition platform using smart-phone tracking and color communication. The interface requires only a camera and a personal smart-phone to provide a motion control interface rather than expensive equipment. The platform recognizes the user's gestures by the tracking 3D distance and the rotation angle of the smart-phone, which acts essentially as a motion controller in the user's hand. Also, a color coded communication method using RGB color combinations is included within the interface. Users can conveniently send or receive any text data through this function, and the data can be transferred continuously even while the user is performing gestures. We present the result that implementation of viable contents based on the proposed motion recognition platform.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11b
• /
• pp.574-576
• /
• 2005

스마트 홈을 구현하기 위한 핸드폰을 이용한 리모트 컨트롤러나 PDA를 통한 통합 리모트 컨트롤러 등의 통합 리모트 컨트롤러에 관한 연구는 활발히 진행되어 오고 있다. 본 논문은 이러한 리모트 컨트롤러에 관한 연구에 대해 두 가지의 새로운 방향을 생각해 보았다. 첫째로 리모트 컨트롤러를 작동시키기 위해서는 핸드폰이나 PDA등의 input 디바이스가 반드시 필요했던 단점을 보완해서 임베디드 보드에 input device 기능을 포함하는 것이다. 그리고 두 번째는 임베디드 리모트 컨트롤러에 user profile을 두어서 단순한 채널 변경의 기능만을 하는 리모트 컨트롤러가 아니라 사용자의 선호도 등의 정보를 가지고 지능적으로 집안 환경을 최적화된 조건으로 만들 수 있도록 설계 했다. 즉 사용자가 가장 좋아하는 TV채널이나 실내온도 등의 정보를 가지고 각 사용자에게 최적화된 환경을 리모트 컨트롤러가 스스로 작동시킬 수 있게 되는 것이다. 그리고 가전을 작동시키기 위해서 임베디드 보드에 있는 IrDA 통신모듈을 통해 일정한 코드 값만 보내주면 되기 때문에 일반적으로 리모트 컨트롤러로 제어가 가능한 거의 모든 전자제품이 쉽게 제어 가능하다.