• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.12
• /
• pp.122-129
• /
• 1995

The most important feature of a-Si TFT is dense localized states such as dangling bonds which exist in tis bandgap. Electrons trapped by localized states dominate the potential distribution in the active a-Si region ,and influence the performance of a-Si TFT. In this paper, we describe the electrical characteristics of a-Si TFT with respect to trap distribution within bandgap, electron mobility and interface states using 2-Dimensional device simulator and compare the result of simulation with measurements. Using the mixed-mode simulator, we can predict the potential variation of pixel which causes residual image problem during the turn-off of a-Si TFT driving circuit. Therefore it is possible to consider trade-off between potential variation of pixel and turn-on current of a-Si TFT for the optimized driving circuit.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.04a
• /
• pp.84-87
• /
• 2003

Carbon-nitrogen (CN) nanofibers have been produced using a water cooled hot isostatic pressure (HIP) apparatus. The CN nanofibers were grown in random with the diameter of about 100-150nm and length over $10{\mu}m$. Emission properties of CN nanofibers were investigated for spacing, between anode and cathode, variation. Then turn-on fields about $1.4V/{\mu}m$. The time reliability and light emission test were carried out for above 100 hours. We suggest that CN nanofibers can be possibly applied to high brightness flat lamp because of low turn-on field and time reliability.

• Proceedings of the KIEE Conference
• /
• 2004.04a
• /
• pp.136-139
• /
• 2004

This paper presents a buck circuit topology of high-frequency with a single switching element. It solved the problem which arised from hard-switching in high-frequency using a resonant snubber and operating under the principle of ZCS turn-on and ZVS turn-off commutation schemes. In the existing circuit, it has the voltage stress which is twice of input voltage in free-wheeling diode. But in the proposed circuit, it has voltage stress which is lower than input voltage with modifing a location of free-wheeling diode. In this paper, it explained the circuit operation of each mode and confirmed the waveform of each mode with simulation result. Also the experiment result verified the simulation waveform and compared the existing voltage stress of free-wheeling diode with the proposed voltage stress of that. Moreover, it compares and analyzes the proposed circuit's efficiency with the hard-switching circuit's efficiency according to the change of load current.

• Journal of the Korean Home Economics Association
• /
• v.45 no.3
• /
• pp.97-107
• /
• 2007

The purpose of this study was to identify the relationship between mother's interactive responsiveness and infant's communication. The participants of this study were 64 pairs of infants aged 13 to 24 months and their mothers. The infants' communication and their mother's interactive responsiveness were observed during mother-infant's free play for 10 minutes. The mother's interactive responsiveness was analysed on the basis of turn-taking and gaze. The collected data were analyzed by one-way ANOVA and Pearson's correlation. It was found that the communication of infants aged 13 to 24 months developed rapidly with a certain tendency. Mothers' interactive responsiveness increased significantly with infants' age group. The relationship between mother's interactive responsiveness and infant's communication was significant.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.8
• /
• pp.1115-1127
• /
• 2010

Several methods have been applied to detect winding faults (turn-to-turn short). The representative approaches have been focusing on current signals. The current signal can give important information to extract features and to detect faults. In this study, current sensors were installed to measure signals for fault detection of BLDC motors. Therefore, it is necessary to select proper feature extraction methods among the popular methods that use current signals.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.6
• /
• pp.859-866
• /
• 2010

Generally, a fixed type guide-bush system is installed during machining miniature work-pieces with high precision in the multi-task CNC lathe. But a conventional guide-bush system does not provide a constant clamping force under the condition of varying work-piece diameters. It is important to maintain a constant clamping force for guaranteeing machining precision. This paper proposes a new guide-bush system with a pneumatic clamping device for the CNC Swiss-turn lathe to keep constant clamping force with changes in work-piece diameters. Through performance tests, new clamping system developed in the study showed better machining precision at the cost of a small increase in the temperature of the system than conventional systems due to an increase in the frictional heat and a change in the heat transfer route.

• Journal of the Korean Magnetic Resonance Society
• /
• v.2 no.1
• /
• pp.41-49
• /
• 1998

A linear undecapeptide, Substance P (SP) is involved in a wide variety of physiological processes such as pain, inflammation, salivation, and hypertension. Tertiary structure of SP in dodecylphosphocholine (DPC) micelles has been investigated by CD, NMR spectroscopy, and DGII calculation. CD spectrum of SP in the presence of 7.5 mM DPC micelles does not show any favorable secondary structure. The tertiary structure determined by NMR spectroscopy and DGII calculation shows that the Phe7-Phr8-Gly9-Leu10 region adopts a turn structure, while the N-terminal region is quite flexible. Both prolines in SP exist preferentially as the trans isoforms and the aromatic ring of Phe7 protrudes outward. Conformation of SP may be restrained by the contact of the Phe7 aromatic ring with the hydrophobic side chains of the DPC micelles and this interaction induces a turn structure. Structure of SP in aqueous solution in the presence of DPC micelles can represent a good model to study the conformation recognized by the receptor near neutral membrane.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.436-441
• /
• 2003

The present study investigates heat/mass transfer characteristics in rotating two-pass ducts of three different aspect ratios with 90-ribbed surfaces. The results show that the flows generated by the 180-turn, rib turbulators, and duct rotation. The curvature of the 180-turn produces Dean vortices causing high heat/mass transfer in the turning region and in the upstream region of the second-pass. The rib turbulators disturb the main flow by producing reattachment and separation near the ribbed surfaces, and increase heat/mass transfer in the region between the ribs. As the rotation number increases, the heat/mass transfer discrepancy between the leading and the trailing surfaces become larger.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.4
• /
• pp.62-68
• /
• 2017

Since the aircraft parts industry is a high-value-added industry, mass production order production, and the hundreds of thousands. Therefore, parts produced However, since these parts require high reliability and stability, a high degree of precision is required. In Korea, there on the roughness of the machined surface in cutting process. However, research on the surface roughness characteristic obtained by which is widely used for aircraft parts is still insufficient in Korea. The purpose of this study is to investigate the effect of turning tool rotation speed and X axis feed rate on the surface roughness of cutting tools in CNC lathes during cutting of aluminum alloy 7075.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.525-528
• /
• 2002

A Novel Zero Current Switching(ZCS) Pulse Width Modulation(PWM) boost converter for reducing two rectifiers reverse recovery related losses Is proposed. The switches of the proposed converter are operating to work alternatively turn-on and turn-off with soft switching(ZVS, ZCS) condition. The reverse recovery related switching losses and EMI problems of the proposed converter eliminates the reverse recovery current of the freewheeling diode(D, Dl) by adding the resonant inductor Lr, in series with the switch S2. The voltage and current stresses of the components are similar to those in its conventional hard switching counterpats. As mentioned above, the characteristics are verified through experimental results.