• Journal of the Korean Society of Safety
• /
• v.8 no.4
• /
• pp.95-100
• /
• 1993

In power transistor switching circuit have shunt snubber(dv/dt limiting capacitor) and series snubber (di/dt limiting inductor). The shunt snubber is used to reduce the turn-off switching loss and the series snubber is used to reduce the turn-on switching loss. Design procedures are derived for selecting the capacitance, inductor and resistance to limit the peak voltage and current values. The action of snubber is analyzed and applied to the design for safety PWM inverter.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.2B no.4
• /
• pp.207-213
• /
• 2002

The paper introduces a switched reluctance motor drive system based on an 80C31 and an Intel 80C 196KB single-chip microprocessor control. Advance schemes are used in turn-on and turn-off angles with the power converter's main switches during traction and regenerative braking. The principles of traction speed control and braking torque control are given. The hardware and software patterns in the 80c31 and the Intel 80C196KB single-chip microprocessor control system are also presented.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.21-22
• /
• 2015

플라이백 컨버터에서 발생하는 EMI 공통모드 잡음은, 스위치 turn-off에서 1차 측 누설 인덕턴스로 인한 기생 진동과 turn-on에서 발생하는 2차 측 출력회로의 기생 진동으로 구성된다. 차동모드 잡음은 직류전원의 스위칭 전류로 인한 전압 강하 성분으로 나타나며 직류전원 임피이던스에 비례하여 증가한다. 1차 측 기생진동은 느린 속도의 일반 다이오드와 직렬저항 삽입으로, 2차 측기생진동은 정류 다이오드의 RC 스너버로 감소 시킨다. 누설 인덕턴스가 큰 UU코어 EMI 필터가 잡음 감소에 유효함을 보인다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1482-1483
• /
• 2007

SI-Thyristor는 스위칭 특성상, turn on시에는 전압구동 특성을 지니며, turn off시에는 전류구동 특성과 전압구동 특성을 지니고 있기 때문에, 그 두가지 특성을 명확히 하여 스위칭 특성을 구분 짓는 것이 어렵다. 본 논문은 SI-Thristor-정전유도용량 사이리스터-의 펄스파워 어플리케이션으로 고안된 게이트 드라이버를 이용하여 직렬연결 특성을 측정했으며, 펄스파워 어플리케이션으로서의 SI-Thrysitor의 스위칭 특성과 그에 적합한 게이트 드라이버의 개선점과 특성에 대하여 기술되어 있다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.163.2-163.2
• /
• 2013

플라즈마 시뮬레이션을 이용하여 디스플레이 공정용 안테나 유도 결합 플라즈마 시스템에서의 플라즈마 변수들에 대한 공간분포를 살펴 보았다. 디스플레이 공정용 챔버 규격은 8세대, 안테나의 turn수는 4turn을 기본으로 하여 안테나 코일의 분할을 각각 4개 분할, 9개 분할로 구분하여 시뮬레이션을 진행한 결과 안테나 배치의 차이에 의한 플라즈마 밀도, 온도, 전위차의 공간분포의 균일도의 차이를 확인 할 수 있었다.

• Proceedings of the PSK Conference
• /
• 2002.10a
• /
• pp.342.2-342.2
• /
• 2002

The ${\beta}$-turn has been implicated as an important conformation for biological recognition of peptides or proteins. Benzodiazepine classes have been known as one of the non peptide ${\beta}$-turn mimic scaffolds. We have developed an efficient approach for the synthesis and derivatization of a scaffold of hydroxytetrahydrodizepinone class in order to screen compound library in various protein targets for new lead generations as well as for structure activity relationships of the scaffold. (omitted)

• 한국도로학회지:도로
• /
• v.20 no.2
• /
• pp.5-10
• /
• 2018

• Korean Architects
• /
• no.2 s.334
• /
• pp.26-31
• /
• 1997

• Journal of Electrical Engineering and Technology
• /
• v.1 no.2
• /
• pp.216-225
• /
• 2006

This paper presents a new circuit topology of DC busline switch and snubbing capacitor-assisted full-bridge soft-switching PWM inverter type DC-DC power converter with a high frequency link for low voltage large current applications as DC feeding systems, telecommunication power plants, automotive DC bus converters, plasma generator, electro plating plants, fuel cell interfaced power conditioner and arc welding power supplies. The proposed power converter circuit is based upon a voltage source-fed H type full-bridge high frequency PWM inverter with a high frequency transformer link. The conventional type high frequency inverter circuit is modified by adding a single power semiconductor switching device in series with DC rail and snubbing lossless capacitor in parallel with the inverter bridge legs. All the active power switches in the full-bridge inverter arms and DC busline can achieve ZVS/ZVT turn-off and ZCS turn-on commutation operation. Therefore, the total switching losses at turn-off and turn-on switching transitions of these power semiconductor devices can be reduced even in the high switching frequency bands ranging from 20 kHz to 100 kHz. The switching frequency of this DC-DC power converter using IGBT power modules is selected to be 60 kHz. It is proved experimentally by the power loss analysis that the more the switching frequency increases, the more the proposed DC-DC converter can achieve high performance, lighter in weight, lower power losses and miniaturization in size as compared to the conventional hard switching one. The principle of operation, operation modes, practical and inherent effectiveness of this novel DC-DC power converter topology is proved for a low voltage and large current DC-DC power supplies of arc welder applications in industry.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.1
• /
• pp.8-13
• /
• 2003

In this paper, suitablility of 1 GHz CISPR limits establishment fur broadcast communication quality protection is examined and the optimum turn step resolution of EUT for spurious measurement of frequency above 1 GHz to increase the accuracy of maximum values extraction is examined. As a result of 500 MHz and 1.7 GHz clock speed personal computer of micro-processor measurement, optimum turn step resolution extracted by National Institution of National Instrument of Standard & Technology(NIST) Koepke method is estimated 40 table positions per polarization in 500 MHz. And in case of 1.7 GHz, step size is 36 table positions. Prediction of turn step size required for fully scan method in gjgahertz measurement will increase measurement accuracy and reduce considerable measurement time as well.