• 한국항만경제학회지
• /
• 제37권1호
• /
• pp.143-157
• /
• 2021

세계보건기구(World Health Organization, WHO), 경제개발협력기구(Organization for Economic Cooperation and Development, OECD)등 국제기구 및 주요 선진국에서는 대기오염의 심각성을 인지하고 있다. 또한 국제해사기구(International Maritime Organization, IMO) 등의 국제기구에서도 선박에서 발생하는 대기오염을 감소시키 위해 다양한 규제를 시행하고 있다. 이러한 국제적인 흐름에 따라 국내에서도 「항만지역등 대기질 개선에 관한 특별법」(이하 특별법)을 제정하며, 항만에서 기인하는 대기오염을 감소시키려는 노력을 보이고 있다. 특별법의 목적은 항만지역 등의 대기질을 개선하기 위하여 종합적인 시책을 추진하는 것이다. 본 연구는 이러한 정책적 움직임에 맞추어 항만에서 기인하는 대기오염물질 배출원별 배출량을 파악하여 정책의 우선순위 설정에 기초자료를 마련하고자 하였다. 이를 위해 선박, 차량, 하역장비, 하역/야적재비산먼지, 도로재비산먼지, 철도 6개 부문으로 분류하여 분석을 시행하였으며, 유럽환경청(European Environment Agency, EEA)과 미국환경보호국(United States Environmental Protection Agency, EPA)에서 제시하는 방법론을 이용하였다. 분석대상 오염물질은 일산화탄소(CO), 질소산화물(NOX), 황산화물(SOX), 총부유물질(TSP), 미세먼지 및 초미세먼지(PM10, PM2.5), 암모니아(NH3)를 대상으로 분석하였다. 분석결과 총 7,122톤의 배출량이 발생한 것으로 나타났다. 물질별로는 NOX가 5,084톤으로 가장많은 비중을 차지하는 것으로 나타났으며, 다음으로 CO(984톤), SOx(530톤), TSP(335톤)의 순으로 나타났다. 배출원 별로는 선박이 4,107톤으로써 가장 많은 비중을 차지하며 다음으로 차량이 2,622톤으로써 높은 배출량을 보였다. 이는 각각 전체 배출량의 57.6%와 36.8%로써 항만 대기오염을 유발하는 주요원인으로 판명되어 이들 배출원에 대한 대책이 필요함을 시사하였다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제5권1호
• /
• pp.60-68
• /
• 2004

The purpose of this paper is to establish an effective inspection system by using OMM (On-Machine Measurement) system based PC-NC. This system can reduce manufacturing lead time because a workpiece is inspected at every machining process and the manufacturing system which includes inspection faculty is able to realize on-line process on CNC machining center. The proposed OMM system is composed of a few algorithms for determination of inspection parameters. It is accomplished by determining the number of measuring points, their location, measuring path using fuzzy logic, Hammersley's method, TSP (Traveling Salesperson Problem) algorithm. The inspection feature applied to this system is based on machining feature. This method is tested by simulation and experiment that are analyzed measuring data and geometry tolerance.

• KIEE International Transactions on Power Engineering
• /
• 제11A권4호
• /
• pp.15-20
• /
• 2001

Power system stability is correlated with system structure, disturbances and operating conditions, and power flows on transmission lines are closely related with those conditions. This paper proposes a methodology to identify correlative power flows for power system transient and small-signal stability prediction. In transient stability sense, the Critical Clearing Time is used to select some dominant contingencies, and Transient Stability Prediction index is proposed for the quantitative comparison. For small-signal stability discusses a methodology to identify crucial transmission lines for stability prediction by introducing a sensitivity factor based on eigenvalue sensitivity technique. On-line monitoring of the selected lines enables to predict system stability in real-time. Also, a procedure to make a priority list of monitored transmission lines is proposed. The procedure is applied to a test system, and it shows capabilities of the proposed method.

• 대한전기학회논문지:전력기술부문A
• /
• 제52권5호
• /
• pp.271-278
• /
• 2003

Power system stability is correlated with system structure, disturbances and operating conditions, and power flows on transmission lines are closely related with those conditions. This paper proposes a methodology to identify correlative power flows for power system transient and small-signal stability prediction. In transient stability sense, the Critical Clearing Time is used to select some dominant contingencies, and Transient Stability Prediction index is proposed for the quantitative comparison. For small-signal stability, this paper discusses a methodology to identify crucial transmission lines for stability Prediction by introducing a sensitivity factor based on eigenvalue sensitivity technique. On-line monitoring of the selected lines enables to predict system stability in real-time. Also, a Procedure to make a priority list of monitored transmission lines is proposed. The procedure is applied to a test system and the KEPCO systems in the year of 2003 and it shows capabilities of the proposed method

• Archives of Plastic Surgery
• /
• 제42권1호
• /
• pp.11-19
• /
• 2015

Background Wound healing is an interaction of a complex signaling cascade of cellular events, including inflammation, proliferation, and maturation. $K^+$ channels modulate the mitogen-activated protein kinase (MAPK) signaling pathway. Here, we investigated whether $K^+$ channel-activated MAPK signaling directs collagen synthesis and angiogenesis in wound healing. Methods The human skin fibroblast HS27 cell line was used to examine cell viability and collagen synthesis after potassium chloride (KCl) treatment by Cell Counting Kit-8 (CCK-8) and western blotting. To investigate whether $K^+$ ion channels function upstream of MAPK signaling, thus affecting collagen synthesis and angiogenesis, we examined alteration of MAPK expression after treatment with KCl (channel inhibitor), NS1619 (channel activator), or kinase inhibitors. To research the effect of KCl on angiogenesis, angiogenesis-related proteins such as thrombospondin 1 (TSP1), anti-angiogenic factor, basic fibroblast growth factor (bFGF) and vascular endothelial growth factor (VEGF), pro-angiogenic factor were assayed by western blot. Results The viability of HS27 cells was not affected by 25 mM KCl. Collagen synthesis increased dependent on time and concentration of KCl exposure. The phosphorylations of MAPK proteins such as extracellular-signal-regulated kinase (ERK) and p38 increased about 2.5-3 fold in the KCl treatment cells and were inhibited by treatment of NS1619. TSP1 expression increased by 100%, bFGF expression decreased by 40%, and there is no significant differences in the VEGF level by KCl treatment, TSP1 was inhibited by NS1619 or kinase inhibitors. Conclusions Our results suggest that KCl may function as a therapeutic agent for wound healing in the skin through MAPK signaling mediated by the $K^+$ ion channel.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.217.2-217.2
• /
• 2014

We prepared a flexible and transparent CuO/Cu/CuO multilayer electrodes on a polyethylene terephthalate (PET) substrate using a specially designed roll-to-roll sputtering system at room temperature for GFF-type touch screen panels (TSPs). By the continuous roll-to-roll sputtering of the CuO and Cu layer, we fabricated a flexible CuO(150nm)/Cu(150nm)/CuO(150nm) multilayer electrodes with a sheet resistance of $0.289{\Omega}/square$, resistivity of $5.991{\times}10^{-23}{\Omega}-cm$, at the optimized condition without breaking the vacuum. To investigate the feasibility of the CuO/Cu/CuO multilayer as a transparent electrode for GFF-type TSPs, we fabricated simple GFF-type TSPs using the diamond patterned CuO/Cu/CuO electrode on PET substrate as function of mesh line width. Using diamond patterned CuO/Cu/CuO electrode of mesh line $5{\mu}m$ with sheet resistance of 38 Ohm/square, optical transmittance of 90% at 550 nm and an average transmittance of 89% at wavelength range from 380 to 780 nm, we successfully demonstrated GFF-type touch panel screens (TPSs). The successful operation of GFF-type TPSs with CuO/Cu/CuO multilayer electrodes indicates that the CuO/Cu/CuO multilayer is a promising transparent electrode for large-area capacitive-type TPSs due to its low sheet resistance and high transparency.

• 대한기계학회논문집A
• /
• 제20권6호
• /
• pp.1827-1835
• /
• 1996

This paper addresses the problem of a torch path generation for the 2D laser cutting of a stock plate nested with resular or irregular parts. Under the constaint of the relative positions of parts enforced by nesting, the developed torch path algorithm generate feasible cutting path. In this paper, the basic object is a polygon( a many-slide figure) with holes. A part may be represented as a number of line segments connected end-to-end in counterclockwise order, and formed a closed contour as requied for cutting paths. The objective is to tranverse this cutting contours with a minimum path length. This paper proposes a simulated annealing based dtorch path algorithm, that is an improved version of previously suggested TSP models. Since everypiercing point of parts is not fixed in advance, the algorithm solves as relazed optimization problem for the constraint, thich is one of the main features of the proposed algorithm. For aolving the torch path optimization problem, an efficient generation mechanism of neighborhood structure and as annealing shedule were introduced. In this way, a global solution can be obtained in a reasonable time. Seveeral examples are represented to ilustrate the method.

• Asian-Australasian Journal of Animal Sciences
• /
• 제31권8호
• /
• pp.1366-1372
• /
• 2018

Objective: A disintegrin and metallopeptidase with thrombospondin motifs type 8 (ADAMTS8) is crucial for diverse physiological processes, such as inflammation, tissue morphogenesis, and tumorigenesis. The chicken ADAMTS8 (chADAMTS8) gene was differentially expressed in the kidney following exposure to different calcium concentrations, suggesting a pathological role of this protein in metabolic diseases. We aimed to examine the molecular characteristics of chADAMTS8 and analyze the gene-expression differences in response to toll-like receptor 3 (TLR3) stimulation. Methods: The ADAMTS8 mRNA and amino acid sequences of various species (chicken, duck, cow, mouse, rat, human, chimpanzee, pig, and horse) were retrieved from the Ensembl database and subjected to bioinformatics analyses. Reverse-transcription polymerase chain reaction (RT-PCR) and quantitative PCR (qPCR) experiments were performed with various chicken tissues and the chicken fibroblast DF-1 cell line, which was stimulated with polyinosinic-polycytidylic acid (poly[I:C]; a TLR3 ligand). Results: The chADAMTS8 gene was predicted to contain three thrombospondin type 1 (TSP1) domains, whose amino acid sequences shared homology among the different species, whereas sequences outside the TSP1 domains (especially the amino-terminal region) were very dif­ferent. Phylogenetic analysis revealed that chADAMTS8 is evolutionarily clustered in the same clade with that of the duck. chADAMTS8 mRNA was broadly expressed in chicken tissues, and the expression was significantly up-regulated in the DF-1 cells in response to poly(I:C) stimulation (p<0.05). These results showed that chADAMTS8 may be a target gene for TLR3 signaling. Conclusion: In this report, the genetic information of chADAMTS8 gene, its expression in chicken tissues, and chicken DF-1 cells under the stimulation of TLR3 were shown. The result suggests that chADAMTS8 expression may be induced by viral infection and correlated with TLR3-mediated signaling pathway. Further study of the function of chADAMTS8 during TLR3-dependent inflammation (which represents RNA viral infection) is needed and it will also be important to examine the molecular mechanisms during different regulation, depending on innate immune receptor activation.

• 한국전기전자재료학회논문지
• /
• 제29권7호
• /
• pp.414-423
• /
• 2016

In the present study, the $CuN_x-Cu-CuN_x$ layer the partial pressure ratio Cu metal of Ar and $N_2$ gas using a DC magnetron sputtering device, was generated by the In-situ method. $CuN_x$ layer was able to obtain a surface reflectance reduction effect from the advantages of the process and the external light. $CuN_x$ layer is gas partial pressure, DC the Power, the deposition time variable transmittance in response to the thickness and partial pressure ratio, the reflectance was measured. $Ar:N_2$ gas ratio 10:10(sccm), DC power 0.35 A, was derived Deposition time 90 sec optimum conditions. Thus, according to the optimal thickness and the composition ratio was derived surface reflectance of 20.75%. In addition, to derive the value of ${\Delta}$ Ra surface roughness of 0.467. It was derived $CuN_x$ band-gap energy of about 2.2 eV. Thus, to ensure a thickness and process conditions can be absorbed to maximize the light in a wavelength band in the visible light region. As a result, the implementation of the $12k{\Omega}$ base line resistance of using the Cu metal. This is, 5 inch Metal mesh TSP(L/S: $4/270{\mu}m$) is in the range of the reference operation.

• 한국재난정보학회 논문집
• /
• 제18권2호
• /
• pp.374-385
• /
• 2022

연구목적: 1급 발암물질이 포함된 공사장 먼지로 인해 피해 발생 시 피해 배상 신청을 해도 기각되거나 소음피해 배상금액의 5~30%정도만 지급하고 있다. 그런 허점 때문에 일부 건설사들은 공사장 먼지관리를 소홀히 하고 있어서 공사장 내 작업자들과 인근 주민들의 피해가 지속되고 있다. 그에 대한 해결방안을 제시코자 한다. 연구방법: 공사장 먼지의 피해배상액 산정기준 문제점, 먼지 농도 측정, 측정자료(광산란법에 의한 전광판 측정기 자료) 분석, 모델링 등 예측, 평가 방법의 문제점을 고찰하고, 개선방안을 제시코자 한다. 연구결과:현재의 공사장 먼지 피해 배상액산정기준과 먼지농도 모델링 및 측정으로는 공사장 먼지피해 배상액 산정이 불가한 것으로 드러나 개선이 시급한 것으로 나타났다. 결론:공사장피해가 예상되는 지점 내(부지경계선과 직선거리100m 내외)에서 피해배상 신청을 받고, 먼지관련 법적 기준인 비산먼지 억제조치기준들의 준수여부와 먼지관리 정도로 먼지피해를 차등 평가하는 배상액 산정방안을 제시한다.