• Korean Journal of Environment and Ecology
• /
• v.23 no.4
• /
• pp.365-375
• /
• 2009

The growth characteristics of Pinus thunbergii windbreak forest around Goosipo Beach, Sangha-Myon, Gochang-Gun, Jeollabuk-Do have been investigated, and the results are summarized as follows. The soil in the site was light acid sand with pH 5.7, and the mean sodium concentration of soils was 1.42dS/m. The tree diameter, height, crown width, and shape ratio(Height/DBH) were better with tree density was coming lower. Especially, the rate of shape ratio under 60 was more in sites with low tree density. This demonstrated that the trees have grown more soundly when the tree density was lower. The direction of main winds and distribution ratio of tree inclination had a correlation. The inclined trees are seemed to be influenced by main winds when they were younger and by Typhoon partly. Eighty one vascular plant species were found in the sites, and more number of herbaceous plants (57 taxa) lived there than woody plants (24 taxa). And more plant species of dune were found at the site where dune have developed well. Some thinning works need at high tree density areas in order to ensure effects of coastal windbreak.

• Journal of Environmental Science International
• /
• v.16 no.9
• /
• pp.1011-1018
• /
• 2007

This study was conducted to analysis the ecological characteristics of "Wando HolIy"$(llex{\times}wandoensis)$ which is expecting as a possible ornamental tree with its beautiful leaves, flowers and fruits, and to find special breeding material which have particular characteristics and also provide correct environmental information which are required for commercial cultivation. The hill of Galmoon-Ri, Gunoei-Myon, Jeonnam Province, Korea, were reported as a original habitat of native $llex{\times}wandoensis$. The investigation shows that soil pH of native habitat was 6.18, hardness was 2.39, humidity was 38.6%, direction of slope is SSW, and average inclination was $15^{\circ}. The vegetation around $I.{\times}wandoensis$ is occupied by trees like an Quercus variabilis, Q. serrata, Q. acuta and so on. These are mixed forest of deciduous trees. Tree height reached up to about 12m and its coverage is about 30%. Q. salicina, Camellia japonica, I. integra, Cryptomeria japonica account for sub-tree layer. Tree height is around 8m and coverage is about 20%. Shrub layer was taken by Viburnum furcatum, Callicarpa japonica, Styrax japonica, Eurya japonica, Lindera obtusiloba, Ligustrum japonicum, Smilax china, Cornus walteri etc. Tree height reaches around l.2m and coverage is around 20%. Herb layer includes Trachelospermum asiaticum var. intermedium, Cymbidium goeringii, Dryopteris bissetiana, Disporum viridescens, Disporum smilacinum, Sasa borealis var. gracilis etc. Trachelospermum asiaticum var. intermedium, which are observed in southern evergreen zone, are dominant and its coverage is around 20%. The native habitat was in spoiled condition because of artificial thin out.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.77-83
• /
• 2020

The technologies of 3D spatial information, such as Smart City and Digital Twins, are developing rapidly for managing land and solving urban problems scientifically. In this construction of 3D spatial information, an object using aerial photo images is built as a digital DB. Realistically, the task of extracting a texturing image, which is an actual image of the object wall, and attaching an image to the object wall are important. On the other hand, occluded areas occur in the texturing image. In this study, the ResNet algorithm in deep learning technologies was tested to solve these problems. A dataset was constructed, and the street tree was detected using the ResNet algorithm. The ability of the ResNet algorithm to detect the street tree was dependent on the brightness of the image. The ResNet algorithm can detect the street tree in an image with side and inclination angles.

• Journal of Environmental Science International
• /
• v.20 no.10
• /
• pp.1319-1328
• /
• 2011

Rhododendron brachycarpum is a evergreen broad-leaved shrub and belongs to the Ericaceae family and the Rhododendron genus. It is well known for its beautiful leaves and flowers. There are 11 species of the Rhododendron genus in Korea. It includes 3 species - Rhododendron brachycarpum, Rhododendron aureum Georgi and Rhododendron brachycarpum var. roseum Koidz. They grow naturally over 1,000 meters above sea level of the Baekdu Mountain Range in Korea. These habitats, according to investigations of 9 Rhododendron brachycarpum natural habitats, are mostly located on the slope of mountains facing north at an altitude of 1,200 m to 1,526 m above sea level with angle of inclination from 30 degrees to 45 degrees. Based on the result of vegetation analysis of dominance species in the quadrates, there are Quercus aliena, Quercus mongolica Fisch. ex Ledeb, Abies holophylla in species of upper trees, and so on. Dominant species of woody plants in tree layer are Quercus aliena, Quercus mongolica Fisch. ex Ledeb, Abies holophylla, Betula platyphylla and Veeatrum patulum Loes. fil, Erythronium japonicum, Dryopteris crassirhizoma, Paeonia japonica var. glabra Makino are founded in herbaceous plants. And we can see another result of the investigation that the flowering rates of the plants with the buds are highly ranked mountains such as Mt. Hambaek 68%, Mt. Gyebang 40%, Mt. Yagksu 9%, Mt. Gaein 7% and Mt. Seolag 0%. The results show that there are 24 over 15-year-old Rhododendron brachycarpums in Mt. Odae and are 56 under 15-year-old trees in Mt. Hambaek and are no trees in Mt. Gyebang and are 9 over 30-year-dead trees only in Mt. Taebaeg. Out of found trees, the highest tree is 7 m in height and 0.6 m in diameter. Also this result shows what are the vulnerability factors of the natural habitats. They are as follows: indiscriminate trails in mountains, damages by mountain climbers, uncareful plant collecting, the fierce competitions with other plants such as Acer pseudosieboldianum var. ishidoyanum Uyeki, Quercus aliena, Celastrus orbiculatus and damages by disease and insect, unusual temperature in natural habitats, etc. Rhododendron brachycarpums have high ornamental value and excellent pharmaceutical effect. But the areas of its habitats decrease dramatically. So we need measures to protect and their natural habitats. It is necessary that we conductfurther investigations to designate conservation area for Rhododendron brachycarpums.

• Korean Journal of Environment and Ecology
• /
• v.29 no.5
• /
• pp.785-790
• /
• 2015

As an alternative to large-scale clear cutting silviculture, strip clear cutting (SC) is being considered as a system compatible with ecological conservation and forest regeneration. In South Korea, application and effectiveness of SCC in varying forest types were rarely found. In this study, under the subject of strip clear cutting lands of pinus densiflora forest at Samcheok, Gangwon-do Province, the developmental aspect of low vegetation prior to and after deforestation and the correlation between environmental factor and pine regeneration were analyzed. The cover rate of understory vegetation was appeared to be increased after deforestation and rapidly increased two years after deforestation, and it was evaluated to be affected by vigorous tree species and photophilic species. From the perspective of relative importance value, Quercus mongolica, Artemisia keiskeana, and Rubus crataegifolius that influence the cover rate showed the inclination of continuous growth. The diversity of species showed increment inclination as well due to introduction and settlement of early transient species. As a result of analyzing the correlation between vegetation and environmental factor and generation of pine tree size, the soil exposure rate, intensity of light, and canopy openness showed positive relationship, and the understory vegetation cover and woody debris cover rate showed negative relationship.

• Asian Journal of Turfgrass Science
• /
• v.19 no.1
• /
• pp.27-38
• /
• 2005

This study was conducted to find out withering and dying trends of turfgrasses on the base of tree, and to investigated how much area of turfgrasses withering and dying were progressed on angle of inclination at golf course. Turfgrasses withering and dying on base of trees on slope was extended more to the down-solpe direction than to the up-solpe direction. This trend was common in all experiment plot. Turfgrasses on the base of trees were withered and dead by competing with tree root fur nutrients and moisture in soil. But the trend of the withering and dying in some experiment plots occurred by soil erosion following turfgrass withering and dying occurring on upside ridge. This trend was generally appeared in region of tree community at upside ridge. The form of turfgrass withering and dying on the base of tree in some experiment plots was similar to that of the tree crown. This withering and dying from occurred at the $11^{th}$ experiment plot in Ji San Golf Course and the $6^{th}$ experiment plot in East valley Golf Course.

• The Journal of Korean Academy of Prosthodontics
• /
• v.33 no.3
• /
• pp.539-549
• /
• 1995

The purpose of this study was to determine the accuracy of 3 implant impression methods by using strain gauge. The models used for this study were partially edentulous mandibular acrylic resin casts Model A, with two abutment analogs in #46,47 extraction site, represented two implant parallel to to the adjacent natural tooth. Model B represent an anterior implant parallel to the adjacene natural tooth and a posterior implant exhibiting a 15-degree lingual inclination. Master framework were fabricated on the master model, and 3 strain gauges were attached to a master framwork to determine the passivity of fit of the framework to sample casts made by the three impression techniques. The master framework was attached to each sample cast with gold screws, which were tightened with the torque driver to ensure a consistent toque application of 10 Ncm. Universal Digital Measuring System UCAM-5BT was used for strain measuring. Impression techniques studid were : 1. unsplinted tapered impression coping, polyvinyl siloxane, stock tray 2. unsplinted squared impression coping, polyether, custom tray 3. squared impression coping splinted with Duralay resin, polyether, custom tray Through analysis on data from this study, the following conclusions were obtained. 1. There were no statistically significant differences between the mean strain recorded from the sample casts made with the tree impression. But only strain values of model A(parallel group) Y-axis was signifcantly differed between Technique 1 and 3(P<0.05). 2. There was no statistically significant difference between model A(parallel group) and model B(15-degree divergent group).

• Computers and Concrete
• /
• v.15 no.5
• /
• pp.771-794
• /
• 2015

This paper proposes an innovative method for selection of measurement sets in static parameter identification of concrete or steel bridges. This method is proved as a systematic tool to address the first steps of Structural System Identification procedures by observability techniques: the selection of adequate measurement sets. The observability trees show graphically how the unknown estimates are successively calculated throughout the recursive process of the observability analysis. The observability trees can be proved as an intuitive and powerful tool for measurement selection in beam bridges that can also be applied in complex structures, such as cable-stayed bridges. Nevertheless, in these structures, the strong link among structural parameters advises to assume a set of simplifications to increase the tree intuitiveness. In addition, a set of guidelines are provided to facilitate the representation of the observability trees in this kind of structures. These guidelines are applied in bridges of growing complexity to explain how the characteristics of the geometry of the structure (e.g. deck inclination, type of pylon-deck connection, or the existence of stay cables) affect the observability trees. The importance of the observability trees is justified by a statistical analysis of measurement sets randomly selected. This study shows that, in the analyzed structure, the probability of selecting an adequate measurement set with a minimum number of measurements at random is practically negligible. Furthermore, even bigger measurement sets might not provide adequate SSI of the unknown parameters. Finally, to show the potential of the observability trees, a large-scale concrete cable-stayed bridge is also analyzed. The comparison with the number of measurements required in the literature shows again the advantages of using the proposed method.

• Journal of Biosystems Engineering
• /
• v.34 no.6
• /
• pp.404-410
• /
• 2009

This study was carried out to develop a self-propelled type explosive subsoiler for improving the root zone soil conditions in orchard and other forest fields. Prototype was designed to be able to inject air and other soil improving material such as lime into soil at the same time, and thus improve the air permeability and drainage of orchard soils to promote the root growth of tree for high quality fruit production. Soil penetration device of explosive subsoiler is composed of air hammer, penetration rob and air injection nozzle. To support the soil penetration device of explosive subsoiler to penetrate vertically, modified Scott-Russel mechanism was used. Timing control device for simultaneous injection of soil improving material with air was attached to the out side wall of air cylinder and as the cylinder move, the soil improving material was injected into soil at the same time. Turning radius of prototype was 2.2-2.3 m with good mobility in sloped land. It took approximately 1 minute for lime injection system to reach the optimum pressure of 9.9 kg/$cm^2$, average 10-20 seconds were required to rupture soil with the depth of 50 cm and 2-3 seconds were required for explosion, so all in all about 1 minute and 20 seconds were required for one cycle of explosion. Maximum soil rupture depth and diameter were 50 cm and 3-4 m respectively depending on the soil type and soil moisture content. For final design of explosive subsoiler inclination angle of lime hopper was increased from 60 degree to 70 degree and the shape of hopper was changed from rectangular cone to circular cone to solve the clogging problem of lime at out let. Agitating system operated by compressed air was attached to the metering device of the prototype, thus more than 90 cc of lime was discharged per cycle from metering device without clogging problems.

• Journal of Environmental Science International
• /
• v.19 no.11
• /
• pp.1337-1353
• /
• 2010

This study intended to investigate environmental factors including soil and vegetation in order to understand the environmental and ecological characteristics of 12 different habitats of Iris odaesanensis. These habitats, according to investigations, are mostly located at elevation of 280 m to 1,555 m with angles of inclination ranging from 2 degree to 30 degrees. A total of 273 vascular plants are identified in 23 quadrates of 12 habitats. Dominant species of woody plants in 12 habitats are represented as Quercus mongolica in the tree layer (T1) and the subtree (T2) layer, and Lespedeza maximowiczii, Lindera obtusiloba, Rhododendron schlippenbachii in the shrub (S) layer. The importance value of Iris odaesanensis is 9.65%, as regards the herbaceous layer, and 6 highly ranked species such as Carex siderosticta (3.92%), Meehania urticifolia (2.67%), Spodiopogon cotulifer (2.58%), Aconitum pseudolaeve (2.51%), Carex bostrychostigma (2.28%) and Disporum smilacinum (2.09%) are considered to be an affinity with Iris odaesanensis in their habitats. The degree of their average species diversity is 1.32, and that of dominance and evenness are 0.08 and 0.89, respectively. The type of soil is sandy loam and loam, and the average field capacity of soil is 28.31%. Their average organic matter is 16.71%, soil pH 5.29, and available phosphorus is 9.29%. Correlation coefficients analysis based on environmental factors, vegetation and soil analysis shows that the coverage of Iris odaesanensis is correlated with pH and dominance, and species richness is positive related with species diversity.