• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.509-512
• /
• 2008

In this study, colorimetric characteristics of a 2.2-inch iriver MP4 based upon OLED was evaluated and compared with another MP4 based upon Liquid Crystal Display (LCD). According to IEC61966-4, the two displays were tested in terms of spectral power distribution, tone reproduction curve (TRC), luminance, contrast, correlated color temperature, 2D color gamut and spatial uniformity. Consequently, the OLED showed better performance for the first four aspects but a similar quality was observed for the rest.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.337-344
• /
• 2007

This paper is about the examination and selection of the special method applied to the railway tunnel which will lie under the road. Moreover, the road was constructed on the weak ground. Eventually, we select DSM, considering geological condition, stability during construction of the railway tunnel, and economic efficiency. The 3D-analysis, performed with PENTAGON-3D and MIDAS CIVIL-3D, shows that allowable standards are all satisfied. In the design of the railroad tunnel under the road at low depth, this paper will give useful data for the selection of the tunneling method.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.17 no.32
• /
• pp.73-79
• /
• 1994

본 연구는 관리한계설정을 위한 새로운 방법을 제시한다. 일반적 관리한계는 중심선(Central Line)과 표준편차(Standard Deviation)에 기인한다. 그러나 본 연구에서는 제품수명주기(PLC)의 각 단계상 발생되는 손익분기점(Break-even Point)과 한계이익곡선 특성을 통하여 탄력적 관리한계(Elastic Control Limit : ECL)를 구축하고자 하였다. 탄력적 관리한계와 한계이익곡선의 관계에서 중심선은 최대이익, $3{sigma}$한계는 최대이익점과 가장 근접해 있는 (상위/하위)손익분기점까지의 거리로 파악할 수 있다. 그리고 총 변동은 ｛상위손익분기점(UBEP) - 하위손익분기점(LBEP)｝으로 고려할 수 있다. 전개 과정으로서는 1. 각 제품별 수명주기(PLC)를 각 단계별로 구분한다. 2. 각 단계별 총이익곡선(TRC)과 총비용곡선(TCC)을 구한다. 3. 한계이익곡선상의 최대이익지점을 구한다. 이러한 연구는 제품성장단계별 평균과 분산의 변동을 동시에 고려하여 탄력적 관리가 가능하다는 장점이 있다. 나아가 마케팅과 소비자 행동의 분석으로 확대될 수 있다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.267-268
• /
• 2008

부분축열을 기준으로 주로 300RT급 이상에서 주로 보급되고 있으며, 하계 전력수요를 심야로 이전시켜 전력사용의 효율성을 높일 수 있으며 동시에 하계발전설비를 회피할 수 있는 측냉식냉방에 대한 회피비용을 분석하고자 한다. 가격, 비용, 요금 등의 자료를 조사하여 이를 토대로 캘리포니아테스트(RIM, P, UC, TRC)를 분석하여 그 결과를 통해 적정 지원금여부를 판단하고자 한다. 또한 이에 대한 비교대상으로 중대형급에서 같이 보급되고 있는 가스 흡수식 냉방시스템과 비교 분석하고자 한다.

• Steel and Composite Structures
• /
• v.25 no.5
• /
• pp.523-534
• /
• 2017

Cable-supported ribbed beam composite slab structure (CBS) is proposed in this study. As a new cable-supported structure, it has many merits such as long span availability and cost-saving. Inspired by the previous research on cable-supported structures, the fabrication and construction process are developed. Pre-stress design method based on static equilibrium analysis is presented. In the algorithm, the iteration convergence can be accelerated and the calculation result can be kept in an acceptable precision by setting a rational threshold value. The accuracy of this method is also verified by experimental study on a 1:5 scaled model. Further, important parameters affecting the mechanical features of the CBS are discussed. The results indicate that the increases of sag-span ratio, depth of the ribbed beam and cable diameter can improve the mechanical behavior of the CBS by some extent, but the influence of strut sections on mechanical behavior of the CBS is negligible.

• Journal of Korea Multimedia Society
• /
• v.18 no.2
• /
• pp.168-177
• /
• 2015

To increase the overall utility and decrease the link delay and power consumption, a joint optimal cross-layer design of congestion control at the transport layer, link delay at the data link layer and power allocation at the physical layer for mobile ad hoc networks is considered in this paper. As opposed to previous work, the rate outage probability in this work is based on exactly closed-form; therefore, the proposed method can guarantee the globally optimal solutions to the underlying problem. The non-convex formulated problem is transformed into a convex one, which is solved by exploiting the duality technique. Finally, simulation results verify that our proposal achieves considerable benefits over the existing method.

• Structural Engineering and Mechanics
• /
• v.55 no.1
• /
• pp.137-160
• /
• 2015

The one-way (two-way) flexural strength of RCC prisms (circular slabs) reinforced with glass fiber textiles is addressed. To this end, alkaline-resistant glass fiber textiles with three surface weights were used in the composite, the matrix concrete was designed with zero/nonzero slump, and the textiles were used with/without an intermediate layer provided by epoxy resin and sand mortar. Prisms were tested under a four-point loading apparatus and circular slabs were placed on simple supports under a central load. Effects of the amount and geometry of reinforcement, matrix workability, and the intermediate layer on the ultimate load and deflection were investigated. Results revealed that, with a specific reinforcement amount, there is an optimum textile tex for each case, depending on the matrix mix design and the presence of intermediate layer. Similar results were obtained in one-way and two-way bending tests.

• Journal of Welding and Joining
• /
• v.2 no.2
• /
• pp.62-69
• /
• 1984

In this study, cold crack susceptibility of high strength steel (ABS EH32 Steel) welded zone with shielded metal are welding was investigated by tensile restraint cracking test method. Effects of diffusible hydrogen content on root cracking, lower critical stress, crack initiation and fracture mode, hardness value distribution of welded zone and fractograph were mainly investigated. Following conclusions are made: 1. In the view of the lower critical stress level, wet electrode, containing much diffusible hydrogen content shows lower value than dried electrode. 2. Hardness value(Hv 5kg) in Heat Affected Zone of wet electrode is higher than that of dried electrode caused by hydrogen embrittlement. 3. In the case of wet electrode, root crack is initiated and propagated in Heat Affected Zone and then propagated to weld metal, but using of dried electrode, root crack is initiated in Heat Affected Zone and propagated to weld metal without propagating in HAZ. 4. For wet electrode, quasi-cleavage fracture mode is majorly observed on the fracture surface of HAZ and partially of weld metal due to hydrogen embrittlement.

• Journal of information and communication convergence engineering
• /
• v.20 no.4
• /
• pp.317-325
• /
• 2022

In this study, we propose a technological system designed to provide machine vision-based automatic inspection and autonomous operation services for an entire process related to product inspection in wire harness manufacturing. The smart factory paradigm is a valuable and necessary goal, small companies may encounter steep barriers to entry. Therefore, the best approach is to develop towards this approach gradually in stages starting with the relatively simple improvement to manufacturing processes, such as replacing manual quality assurance stages with machine vision-based inspection. In this study, we consider design issues of a system based on the proposed technology and describe an experimental implementation. In addition, we evaluated the implementation of the proposed technology. The test results show that the adoption of the proposed machine vision-based automatic inspection and operation service system for multi-wire harness production may be considered justified, and the effectiveness of the proposed technology was verified.

• Journal of the Korea Society for Simulation
• /
• v.29 no.1
• /
• pp.57-69
• /
• 2020

Many researchers have recommended that DBR scheduling would be an efficient method to maintain the balance of their workload among many processes in the general flow shop. However, as product variety has increased in recent years, the process has become more complex and requires the re-entrance of raw materials and work in process. The re-entrant line has known for the complex manufacturing process that raw materials are repeatedly processed on the same machine. This study reviews the applicability of DBR against the re-entrant manufacturing line due to the distinguishing characteristics and the higher complexity caused by multiple visits of a job into the identical process. In order to apply the DBR method to the re-entrant process, the main idea is to reconstruct re-entrant process into a virtual flow process(loop) that has a single bottleneck. This study discusses the following two questions. First, DBR is also superior to traditional scheduling methods against re-entrant manufacturing line. And how we structure and detect the system bottleneck (or sub-bottleneck) through drum-buffer-rope concepts. To answer the above questions, we experimented and analyzed the effects of the applicability of DBR under the general re-entrant process model(TRC, Technology Research Center). As a result, we have identified a balance between loops for cycle time and work in process.