• Journal of Digital Convergence
• /
• v.13 no.11
• /
• pp.141-148
• /
• 2015

In this paper, for developing and implementing the HLS(Http Live Streaming) transmitter based embedded linux which is operated easily and cheap and lower power, portable in all networks and client environments compared to exist video live streaming transmitters. We design the developed HLS transmitter hardware using the Arm11 core and then porting the Embedded Linux OS(Operating System) and implementing the HLS protocol using the open source FFmpeg and Segmenter. For proving the performance of developed HLS transmitter, we make the testing environment for testing the performance of HLS transmitter including the notebook, iPhone, android Phone, Notebook and then analysis the received video in the client displayer. In this paper, we suggest the developed HLS transmitter performance data values higher than the Apple company's HLS recommended specification values and the picture of developed HLS transmitter operation in the testing environment. The application field of this paper result is that the man who works in the emergency situation take HLS and transmit the live emergency situation to the head quarter using this portable HLS.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.4
• /
• pp.571-578
• /
• 2023

In this paper, we propose a low EMI data transmitter employing a delay-locked loop for vehicles. For the low EMI characteristic, the transmitter has been designed to have low slew rate and employs the delay-locked loop to correct the amount of change in the slew rate due to process variations. According to simulation results, the proposed transmitter which the delay-locked loop has smaller slew rate change as compared to the conventional transmitter. The proposed circuit has been designed with a 65nm process technology and the data rate is 20Mbps with a supply voltage of 1.1V. As compared to a conventional transmitter, the proposed transmitter shows that variations of the slew rate become 53.6% lower in a fast condition and 13.07% lower in a slow condition.

• Journal of Broadcast Engineering
• /
• v.9 no.1
• /
• pp.32-42
• /
• 2004

In this paper we apply space-time block code with multiple transmitter/receiver antennas to the Advanced Television Systems Committee (ATSC) terrestrial broadcasting systems. Especially, we apply Aiamouti scheme with two transmitter antennas and multiple receiver antennas to the ATSC broadcasting system. Also. diversity technique with multiple receiver antennas and space-time block code scheme with multiple transmitter/receiver antennas are compared. Our simulation results show that the ATSC broadcasting system with multiple transmitter/receiver antennas has an extremely good performance than the scheme with single transmitter/receiver antenna in the Rayleigh fading channel.

• 유체기계공업학회:학술대회논문집
• /
• 2001.11a
• /
• pp.404-410
• /
• 2001

A new thermal type fluid level transmitter was designed and tested at the HITROL R&D institute. The relation of heat transfer and electric resistance was adopted as an operation principle. The length of a fabricated level transmitter was two meters and a water under normal temperature was used as a working fluid for the experiment Finally, the new product could have a high precision, acceptable accuracy and reasonable response time. Foreign-made level transmitter of this type is under in use for measuring water level of containment building in nuclear power plants so far. It is expected that new product will substitute it.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.12
• /
• pp.16-22
• /
• 1994

In this paper, transmitter and receiver modules for free space optical interconnection are implemented and characterized. In the transmitter module, bias circuitry which inject current into the direct modulated laser diode is fabricated and in the receiver module, p-i-n diode is integrated with an MMIC amplifying stage. Laser diode has a direct-modulated bandwidth of 2 GHz at 1.4 Ith bias while p-i-n diode and amplifying stage has a bandwidth of 1.3 GHz and 1.5 GHz, repectively. Optical interconnection has a bandwidth of 1.3 GHz and linearly transmit modulated voltage signal up to 1.5 Vp-p. Measured loss of optical interconnection is 5dB which is composed of optoelectronic conversion loss of 15 dB, electrical impedance mismatch loss of 6.7 dB in transmitter module and gain of 18 dB in receiver module. Seperation between transmitter and receiver can be extended up to 50 cm by using a lens.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.2
• /
• pp.194-201
• /
• 2015

A frequency modulated ultra-wideband (FM-UWB) transmitter with a high-robust relaxation oscillator for subcarrier generation and a dual-path Ring VCO for RF FM is proposed, featuring low power and low complexity. A prototype 3.65-4.25 GHz FM-UWB transceiver employing the presented transmitter is fabricated in $0.18{\mu}m$ CMOS for short-range wireless data transmission. Experimental results show a bit error rate (BER) of $10^{-6}$ at a data rate of 12.5 kb/s with a communication distance of 60 cm is achieved and the power dissipation of 4.3 mW for the proposed transmitter is observed from a 1.8 V supply.

• Laser Solutions
• /
• v.15 no.4
• /
• pp.1-5
• /
• 2012

We demonstrate that reduced graphene oxide (rGO) coated thin aluminum film is an effective optoacoustic transmitter for generating high pressure and high frequency ultrasound previously unattainable by other techniques. The rGO layer of different thickness is deposited between a 100 nm-thick aluminum film and a glass substrate. Under a pulsed laser excitation, the transmitter generates enhanced optoacoustic pressure of 64 times the aluminum-alone transmitter. A promising optoacoustic wave generation is possible by optimizing thermoelasticity of metal film and thermal conductivity of rGO in the proposed transmitter for laser-induced ultrasound (LIUS) applications.

• Journal of Korea Society of Industrial Information Systems
• /
• v.12 no.4
• /
• pp.148-152
• /
• 2007

This paper develops an integrated optic transmitter/receiver based on ring-type WDM PON. The optic transmitter/receiver can transmit real-time images from the CCTV of a remote street without compression and transmit TCP/IP data using an optic fiber. This system can also perform remote controls of the CCTV camera. The developed optic transmitter/receiver can provide the monitoring service of an advanced image quality of remote traffic using a broadband technology.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.4
• /
• pp.415-424
• /
• 2016

This paper describes a high data rate proximity transmitter design for high resolution smartphone-mirrored display applications. A 2 Gb/s transmitter is designed with a low transmission power of -70 dBm/MHz and a wide bandwidth of nearly 3 GHz. A digital pre-correction method is employed in the transmitter to mitigate the inter-symbol interference problem. A carrier-based digital pulse shaping and a reconfigurable digital envelope generation methods are employed for robust operation by utilizing 20 phases from a 2 GHz phase-locked loop. A 6.5-9.5 GHz transmitter implemented in 65 nm CMOS achieves the maximum data rate of 2 Gb/s, consuming only 7.6 mW from a 1 V supply.

• Journal of IKEEE
• /
• v.13 no.4
• /
• pp.50-56
• /
• 2009

This paper describes the design of image data transmitter for portable media device for Mobile Display Digital Interface standard. The transmitter uses connection lines to 6 to transmit QVGA image data. In this paper, the transmitter is using only 9 packets for image processing and a state-machine based design is adapted for packet processing. The design was verified using FPGA Xilinx virtex4-LX60. Data rate of the transmitter is 363Mbps with six connection lines. The transferring capability is 30 frame of 24bit RGB 500,000 pixel image data per second.