• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.1
• /
• pp.53.2-53.2
• /
• 2010

Using the JHK 2MASS near-infrared data, we present photometry results for the old open cluster (OC) Trumpler 5 (Tr 5). From the near-infrared color-magnitude diagrams of Tr 5, we have located the position of the red giant clump (RGC) stars, and used the mean magnitude of the RGC stars in K-band to estimate the distance to Tr 5. From the Padova isochrone fittings, we have estimated the reddening, metallicity, and age of Tr 5. These parameters generally agree well with those obtained from the previous studies on Tr 5 and confirms that this cluster is an old OC with metallicity being metal-poorer than solar abundance, located in the anti-Galactic center region.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.10a
• /
• pp.230-233
• /
• 2004

The purpose of this study is to establish the optimal induction heating conditions of various preform types used for TR forging. The finite element model coupled electro-magnetic and transient heat transfer was employed to evaluate the distribution of temperature at the billet. Power control method was applied to control temperature of preform in induction heating because TR forging is not a continuous process. Power schedule that consists of heating and holding stage was suggested. In heating stage, power is inversely proportional to diameter of preform but the time of heating stage is directly proportional to the diameter of preform. But, in holding stage, the required power for thermal equilibrium per unit volume of the billet decreases with an increase in a diameter of billet due to the increase of efficiency.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.232-233
• /
• 2001

2차 비선형광학 물질이 높은 응용성을 갖기 위해서는 큰 2차 비선형광학 계수뿐만 아니라 넓은 파장 영역에 걸친 투명성을 가지고 있어야 한다. vinylidene fluoride(VDF)와 trifluoroethylene(TrFE)가 공중합된 f(VDf-TrFE) 공중합체는 이러한 조건을 갖추고 있는 강유전성 물질이다. 우리는 몰비율이 72：28인 P(VDF-TrFE)을 ITO기판위에 casting하고 corona 극화한 뒤, 두 개의 입력 파장(1064nm, 532nm)에 대한 2차 조화파 발생 실험을 실시하고 Herman과 Hayden의 마커무의 식을 이용하여 2차 비선형 광학 계수를 측정하였다. (중략)

• ETRI Journal
• /
• v.38 no.6
• /
• pp.1124-1134
• /
• 2016

The tone reservation method is one of the most effective pre-distortion methods for peak-to-average power ratio reduction in orthogonal frequency division multiplexing (OFDM) systems. Its direct application to OFDM systems with offset quadrature amplitude modulation (OQAM) is, however, not effective. In this paper, two novel TR-based methods are proposed, specifically designed for OFDM/OQAM systems by taking into consideration the overlapping nature of OQAM signals. These two methods have different approaches to the generation of the peak-cancelling signal. The first one (overlapped scaling tone reservation) generates the peak-cancelling signal using a least squares approximation algorithm with possible adjacent symbol overlap; the second one (multi-kernel tone reservation) generates the peak-cancelling signal by using multiple impulse-like time domain kernels. It is shown by simulation that, when used in OFDM/OQAM systems, the proposed methods can provide better performance than the direct application of the existing controlled clipping tone reservation method, and even outperform the multi-block tone reservation method.

• YAKHAK HOEJI
• /
• v.30 no.3
• /
• pp.111-120
• /
• 1986

The influence of debrisoquine on pressor actions of norepinephrine (NE) and tyramine (TR) was investigated in rabbits. Debrisquine(D), in the doses of 1.0, 3.0 and 6.0.mu.g/kg, i.v. potentiated significantly the pressor actions of NE and TR, except the action of TR in the dose of 1.0mg/kg of debrisoquine. NE response potentiated by debrisoquine was not affected by tranylcypromine, a MAO inhabiter, or desipramine, a NE uptake blocking agent, but augmented by reserpine, a NE depleting agent, or bethanidine, a sympathetic neuronal blocking agent. NE response potentiated by tranylcypromine or desipramine was augmented by debrisoquine, while NE response potentiated by reserine or bethanidine was not affected by debrisoquine. TR response potentiated by debrisoquine was weakened by tranylcypromine, desipramine or reserpine, and not affected by bethanidine. TR response in rabbit pretreated with tranylcypromine, desipramine or reserpine was augmented by debrisoquine, but in rabbit pretreated with bethanidine was not affected by debrisoquine.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.367-370
• /
• 2000

In this study, thin films of 70/30 and 80/20 mol% P(VDF-TrFE) copolymers were fabricated by physical vapor deposition method. In order to determine the optimum deposition condition, the copolymer thin films were fabricated in the heating temperature of 260$^{\circ}C$, 280$^{\circ}C$, and 300$^{\circ}C$. The deposition rate was measured in a real time by thickness monitor. The surface image of prepared thin films was analyzed by using AFM. From the results of TG-DTA,70/30 and 80/20 mol% P(VDF-TrFE) copolymers were observed the Curie transition point below the melting point. As the results of AFM and FT-IR analysis, we determined that the optimum deposition temperature was 300$^{\circ}C$.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.4
• /
• pp.395-399
• /
• 2008

The purpose of this paper is to investigate the fabrication of P(VDF-TrFE) organic thin films through the vapor deposition method and the piezoelectric properties of the organic thin films thus produced. Vapor deposition was performed under the following conditions: the working temperature, and the pressure of reaction chamber were $300^{\circ}C$, and $2.0{\times}10^{-5}$ Torr, respectively. The molecular structure and crystallinity of the evaporated organic thin films were evaluated by using a FT-IR (Fourier-Transform Infrared spectroscopy) and XRD (X-ray diffractometry), The results showed that crystallinity increased with an increase in the substrate temperature. When the P(VDF-TrFE) organic thin films were fabricated by increasing the substrate temperature, its piezoelectric coefficient($d_{33}$) increased.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.315.2-315.2
• /
• 2013

본 논문에서는 반사방지 VF2-TrFE 박막을 이용한 MIS Solar cell을 제작하여 전기적, 구조적 특성을 평가하였다. ALD법을 이용하여 고유전율의 화학적 안정성이 우수한 산화알루미늄을 절연층으로 한 Al/Al2O3/Si(100)을 제작하였으며 cell의 효율을 향상시키기 위해 spin coating법을 이용하여 VF2-TrFE 반사방지막을 증착시켰다. 제작된 반사방지 VF2-TrFE 박막 MIS solar cell은 MIS 커패시터의 전류밀도-전계 특성, 커패시턴스-전압 특성과 반사방지막 열처리 조건에 따른 태양전지 효율을 Solar simulator 및 Quantum Efficiency system으로 측정하였다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.5 no.1 s.9
• /
• pp.45-54
• /
• 2006

The UWB signal distortion in frequency selective channel has made it difficult to implement the channel estimator and the synchronizer of the UWB receiver. In this paper, we examine the performances of TR(Transmitted Reference) and DTR(Differential TR) UWB which use either reference pulse or differential method to estimate the channels. we also propose a FSK-based PRM(Pulse Repetition Modulation) UWB system as an another form of UWB system which is advantageous in frequency selective channel. Finally, resorting to statistical analysis, we examine the noise effect due to noisy reference at an auto-correlation(AcR) receiver. moreover, SNR dependance of the integration length in the AcR receiver is also investigated.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.6
• /
• pp.550-556
• /
• 2009

In an application of a time reversal(TR) focusing of array transducer on a defect inside the test material, we employ a new time delay focusing technique based the TR process. In order to realize this idea, a multi-channel ultrasonic system is constructed capable of applying necessary time delays to each channel. The TR-based focusing procedure first measures the backscattered signals after firing one of the array elements. A phase slope method is then used to determine the time-of-flights of the backscattered signals received by all elements of the array. These time delays are used to adjust the time of excitation of the elements for transmission focusing on the defect. In addition to the TR focusing, the classical phased array focusing is also considered for comparison. Experimental results show that the TR-based time delay focusing produces much stronger backscattered signals than the phased array focusing, demonstrating the enhanced capability of the TR focusing.