• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.308-311
• /
• 2000

The organic electroluminescene (EL) device has gathered much interested because of its potential in materials and simple device fabrication. We fabricated EL device which have a mixed single emitting layer containing N,N'-diphenyl-N,N'-(3-methylphenyl)-1,1'-biphenyl-4,4'-diamine [TPD] and poly(3-hexylthiophene) [P3HT]. The molar ratio between P3HT and TPD chaged with 1:1, 3:1, 5:1, 3:2 and 5:2. EL intensity of ITO/P3HT+TPD/Mg:In devices is enhanced by addition of TPD into P3HT. This can be explained that the energy transfer occurs from TPD to P3HT. Recombination probability increases in emitting layer because that TPD as hole transport material plays a role more injection hole and Mg:In (3.7eV) electrode has low work function make easily electron injection. ITO/P3HT+TPD(5:2)/Mg:In devices emit orange-red light at 28V.

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1469-1471
• /
• 1997

In this study, Organic electroluminescent(EU devices with multilayer structures were fabricated using tris (8-hydroxy quinolinate) aluminum($Alq_3$) as an electron-tran sporting emitting layer and TPD(N,N'-diphenyl-N,N'-bis(3-methylphenyl)-[1,1'-biphenyl]-4,4'-diamine : aromatic diamine) as a hole-transporting layer. A cell with a structure of glass substrate/indium-tin-oxide(ITO)/$Alq_3$/TPD/Mg:In exhibited bright green electroluminescence from the TPD layer. The peak intensity of TPD and $Alq_3$ different from spin coating and vacuum evaporation. The peak emission energy shifts to a higher energy with deposition technique. An emission peak at 500nm was achieved at a driving voltage of 30V.

• The Journal of Korean Physical Therapy
• /
• v.18 no.5
• /
• pp.13-23
• /
• 2006

Purpose: This study was to investigate two-point discrimination(TPD) and related factors in rural community residents. Methods: The sample consisted of 68 people who have been living in rural community in June 2005 studied. TPD was measured from the tips of the thumb, index, middle, ring, and little finger of each hand with the TPD esthesiometer. The research was designed to be a cross-sectional measured study. SAS statistical software was used for the analysis. The characteristics of the study sample were described by mean and standard deviation(SD) for continuous variables and by frequency and percentage for categorical variables. The Student's t-test and analysis of variance (ANOVA) were used to compare TPD in gender and diabetes mellitus. A Pearson's correlation analysis was conducted for relationship among values of 5 fingers. Multiple regression analysis was performed to determine the factors associated with TPD. Results: A total of 68 residents were measured, their average $age{\pm}SD$ was $54.2{\pm}23.2$ years(range: $12{\sim}88\;yr$). The mean TPD for 5 fingers tips in dominated side was 4.76mm(thumb 3.98mm, index 4.22mm, middle 4.79mm, ring 5.17mm, and little finger 5.65mm, respectively). 4.91mm for thumb finger of women was significantly higher than 3.54mm that of men's in difference between gender(p=.01l4), also women(4.39mm) was higher than men(3.71mm) in median nerver area(p=.0318). There was a statistically significant difference in age(p=.0022), which were under age of 20(3.36mm), 30 years(3.61mm), 40 years(5.38mm), 50 years(4.84mm), 60 years(5.28mm), 70 years(5.18mm), and over age of 80(5.29mm). Factors related to TPD of fiver fingers by multiple regressions were gender(${\beta}=.03$, p=.0001). Conclusions: Taken together, gender and age were significantly associated with TPD. We recommend that further research should measure TPD by using larger sample sizes and more sensitive measurement instruments.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.87-88
• /
• 2008

In the structure of ITO/N,N'-diphenyl-N,N' bis (3-methylphenyl)-1,1'-biphenyl-4,4'-diamine(TPD)/tris (8-hydroxyquinoline)aluminum$(Alq_3)$/Al device, we studied the efficiency improvement of organic light-emitting diodes due to variation of deposition rate of TPD materials. The thickness of TPD and $Alq_3$ was manufactured 40 nm, 60 nm, respectively under a base pressure of $5\times10^{-6}$Torr using a thermal evaporation. The $Alq_3$ used for an electron-transport and emissive layer were evaporated to be at a deposition rate of 2.5 $\AA$/s. When the deposition rate of TPD increased from 1.5 to 3.0 $\AA$/s, we found that the average roughness is rather smoother, external quantum efficiency is superior to the others when the deposition rate of TPD is 2.5 $\AA$/s. Compared to the ones from the devices made with the deposition rate of TPD 3.0 $\AA$/s, the external quantum efficiency was improved by a factor of eight.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.04b
• /
• pp.124-127
• /
• 2002

In this study, The cathode interface layer (CIL) was investigated using aromatic diamine derivatives. Cz-TPD (4,4'-biscarbazolyl(9)-biphenyl) used in the cathode interface layers is investigated emition charcaracteristics at the green organic electroluminescent devices. TPD (N,N' -dyphenyl -N -N'-bis (3-methy phenyl)-1,1' -biphenyl-4,4' -diamine) as the hole transformer layer and $Alq_{3}:tris$ (8-hyd-roxyquinoline) aluminium) as the electron transport layer and emiting layer maded use of the organic electroluminescent device. The Organic Electroluminescent Device with Ag cathode and CIL of Cz-TPD(4,4'-biscarbazolyl(9)-biphenyl) showed good EL characteristics compare to a conventional Mg:Ag device and also an improved storage stability. [1] As the change in MgAg, Cz-TPD/Ag, Ag at the chthode, the electrical and optical charcaracteriseics were investigated.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1404-1407
• /
• 2005

We have fabricated organic light-emitting diodes using poly(N-vinylcarbazole)(PVK) doped with N,N'- diphenyl-N,N'-bis(3-methylphenyl)-[l,l'-biphenyl]- 4,4/-diamine (TPD) as the hole transport layer. TPD molecules act as the trapping sites in PVK and reduce the hole mobility, which can enhance the electronhole balance in the emitting layer, resulting in the enhanced device performance. We have found the optimum ratio of TPD to PVK for the EL efficiency.

• Environmental Analysis Health and Toxicology
• /
• v.7 no.1_2
• /
• pp.53-57
• /
• 1992

Amount of lead burden in a tissue reflects poisoning of lead in that tissue, so is the removal of lead directly connected to curement of lead poisoning. The purpose of present study was to investigate the relative effects of penicillamine and thiamine tetrahydrofurfuryl disulfide (TTFD) or thiamine propyl disulfide (TPD) in the removal of lead from rat brain tissue treated with excessive lead. Wistar rat pups of both sexes were used in this experiment. Within 1 day of parturition, experimental mothers nursing their pups as well as rat pups were given drinking water containing 0.2% lead acetate, TTFD 20mg/1.2 L (2 mg/kg/day), TPD 20 mg/1.2 L (2mg/kg/day), penicillamine 40 mg/1.2 L (40 mg/kg/day), 0.2% lead acetate+TTFD 20mg/1.2 L (2 mg/kg/day), 0.2% lead acetate+ TPD 20 mg/1.2 L (2 mg/kg/day) or 0.2% lead acetate+ penicillamine 40 mg/1.2 L (40 mg/kg/day) ad libitum, throughout the entire period of experiment. Rat pups in the control group received normal tap water. The animals were sacrificed by decapitation on the day when they become 2 or 8 weeks of age. Brains were dissected into five regions: telencephalon, diencephalon, midbrain, pons/medulla and cerebellum. The dissected brain tissues were lyophillized and then solubilized by acid mixture (nitric acid + sulfuric acid). Lead levels in the solubilized brain tissues were measured by the inductively coupled plasma. In lead-exposed rats, lead levels were significantly higher than those of control group in all brain legions, lead levels in brain regions of TTFD or TPD group were generally lower than those of control group. The simultaneous administration of lead with TTFD or TPD to animals caused significant decrement of lead from all brain regions. In the elimination of lead from brain regions, effectiveness of TTFD or TPD was equivalant to penicillamine.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.125-128
• /
• 1998

Electroluminescent(EL) devices based on organic thin films have attracted lots of interests in large-area light-emitting display. One of the problems of such device is a lifetime, where a degradation of the cell is possibly due to an organic layer's thickness, morphology and interface with electrode. In this study, light-emitting organic electroluminescent devices were fabricated using Alq$_3$(8-hydroxyquinolinate aluminum) and TPD(N,N'-diphenyl-N,N'-bis(3-methylphenyl)-[1-1'-biphenyl]-4,4'-diamine).Where Alq$_3$ is an electron-transport and emissive layer, TPD is a hole-transport layer. The cell structure is ITO/TPD/Alq$_3$/Al and the cell is fabricated by vacuum evaporation method. In a measurement of current-voltage characteristics, we obtained a turn-on voltage at about 9 V. And we used other buffer layer of PPy(Polypyrrole) with ITO/PPy/TPD/Alq$_3$/Al structure. We observed a surface morphology by AFM(Atomic Force Microscopy), UV/visible absorption spectrum, and PL(Photoluminescence) spectrum. We obtained the UV/visible absorption peak at 358nm in TPD and at 359nm in Alq$_3$, and at 225nm and the PL peaks at 410nm in TPD and at 510nm in Alq$_3$ and at 350nm. We also studied EL spectrum in the cell structure of ITO/TPD/Alq$_3$/Al and ITO/PPy/TPD/Alq$_3$/Al and we observed the EL spectrum peak at 510nm from our cell

• Journal of the Korean Chemical Society
• /
• v.41 no.3
• /
• pp.144-149
• /
• 1997

Organic electroluminescence devices(ELD) were fabricated using by molecularly doped method with N,N'-diphenyl-N,N'-bis(3-methylphenyl)-1,1'-biphenyl-4,4'-diamine(TPD) as a hole transport agent, squarylium dye as an emitting agent, and side chain liquid crystalline polymer(MCH) as matrix for TPD. An indium-tin-oxide(ITO) coated glass and an Mg electrode were used as the hole and the electron injecting electrode, respectively. The highest stability of ELD was obtained by spin coating method using dichloroethane as a solvent at a polymer/TPD concentration of 0.005 wt%. For the EL cell with ITO/polymer-TPD/SQ dye/Mg structure, we achieved light red luminescence at a current of 102 mA/$cm^2$ with an applied voltage of 23 V.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.1
• /
• pp.74-80
• /
• 2009

In the structure of ITO/N,N'-diphenyl-N,N' bis (3-methylphenyl)-1,1'-biphenyl-4,4'-diamine(TPD)/tris (8-hydroxyquinoline)aluminum($Alq_3$)/Al device, we studied the efficiency improvement of organic light-emitting diodes due to variation of deposition rate of hole transport layer (TPD) materials using hole-size of crucible boat. The thickness of TPD and $Alq_3$ was manufactured 40 nm, 60 nm, respectively under a base pressure of $5{\times}10^{-6}$ Torr using a thermal evaporation. The $Alq_3$ used for an electron-transport and emissive layer were evaporated to be at a deposition rate of $2.5\;{\AA}/s$. When the deposition rate of TPD increased from 1.5 to $3.0\;{\AA}/s$, we studied the efficiency improvement of TPD using the hole-size of crucible is 1.0 mm. When the deposition rate of TPD is $2.5\;{\AA}/s$, we found that the average roughness is rather smoother, the luminous efficiency the external quantum efficiency is superior to the others. Compared to the two from the devices made with the deposition rate of TPD is $2.0\;{\AA}/s$ and $3.0\;{\AA}/s$, the external quantum efficiency was improved by four-times and two-times, respectively.