• The Journal of Advanced Prosthodontics
• /
• 제2권3호
• /
• pp.81-87
• /
• 2010

PURPOSE. The purpose of this study was to compare the linear sintering behavior of presintered zirconia blocks of various densities. The mechanical properties of the resulting sintered zirconia blocks were then analyzed. MATERIALS AND METHODS. Three experimental groups of dental zirconia blocks, with a different presintering density each, were designed in the present study. Kavo $Everest^{(R)}$ ZS blanks (Kavo, Biberach, Germany) were used as a control group. The experimental group blocks were fabricated from commercial yttria-stabilized tetragonal zirconia powder (KZ-3YF (SD) Type A, KCM. Corporation, Nagoya, Japan). The biaxial flexural strengths, microhardnesses, and microstructures of the sintered blocks were then investigated. The linear sintering shrinkages of blocks were calculated and compared. RESULTS. Despite their different presintered densities, the sintered blocks of the control and experimental groups showed similar mechanical properties. However, the sintered block had different linear sintering shrinkage rate depending on the density of the presintered block. As the density of the presintered block increased, the linear sintering shrinkage decreased. In the experimental blocks, the three sectioned pieces of each block showed the different linear shrinkage depending on the area. The tops of the experimental blocks showed the lowest linear sintering shrinkage, whereas the bottoms of the experimental blocks showed the highest linear sintering shrinkage. CONCLUSION. Within the limitations of this study, the density difference of the presintered zirconia block did not affect the mechanical properties of the sintered zirconia block, but affected the linear sintering shrinkage of the zirconia block.

• 한국작물학회지
• /
• 제44권4호
• /
• pp.373-381
• /
• 1999

Six soybean cultivars having different SDS susceptibility were planted with sorghum seedinoculum infested with F. solani isolate 171 in the greenhouse. First leaf symptoms appeared on unifoliar leaves at 9 days after inoculation and all cultivars showed the typical leaf symptoms at 13 days after inoculation, when trifoliar leaves emerged. Leaf symptoms development in susceptible cultivars was faster than in resistant cultivars. Leaf symptom severities during the period of 25 to 29 days after inoculation showed a significant difference between cultivars which had SDS resistance and sus ceptibility. In this period, area under the diseaseprogress curve (AUDPC) of Hartz 6686 was the highest and that of PI 520733 was the lowest. SDS caused serious damage to the growth of soybean in all cultivars. Average reductions of growth rate of root fresh weight and dry weight were greater than those of plant tops. Duyu-kong showed less severe leaf symptoms than that of SDS suscetible cultivars; however, average growth rate of plants top and roots of this cultivar was less but not significantly different than those of SDS susceptible cultivars. In all cultivars, as severity of leaf symptoms increased, plant top weight decreased. Root rot symptoms were observed in all cultivars before leaf symptoms appeared. Average proportions of tap root reddish-brown discoloration of all cultivars was up to 75 % at 15 days after inoculati on; however there was no significant differenc between cultivars at each rating date. Appearances of leaf symptoms on leaves varied in each cultivar. SDS resistant cultivars had a significantly higher level of crinkling than susceptible cultivars and SDS susceptible cultivars had a significantly higher level of necrosis than resistant cultivars. Further study will be needed to identify the relationships between the physiological growth rate and SDS severities in soybeans.

• 한국정밀공학회지
• /
• 제33권6호
• /
• pp.431-438
• /
• 2016

Recently, concerns about the environment are becoming more important because of global warming and the exhaustion of earth's resources. In the aviation and automobile industries, the application of light materials is increasingly important for eco-friendly and effective. Carbon Fiber Reinforced Plastics is a composite material which great formability and the high strength of carbon fiber. CFRP, which is both light and strong, is hard to manufacture. In addition, CFRP machining has a high chance of defects. This research discusses the development of a manufacturing system package for CFRP machining. It involving CFRP Drilling/Water-jet Manufacturing Machines, Inspection/Post-processing Systems, CNC platform for an EtherCAT servo Communication, Flexible Manufacturing Systems and CFRP machining Processes.

• 대한원격탐사학회지
• /
• 제27권6호
• /
• pp.703-715
• /
• 2011

Forests have been considered one of the most important ecosystems on the earth, affecting the lives and environment. The sustainable forest management requires accurate and timely information of forest and tree parameters. Appropriately interpreted remotely sensed imagery can provide quantitative data for deriving forest information temporally and spatially. Especially, analysis of individual tree detection and crown delineation is significant issue, because individual trees are basic units for forest management. Individual trees in aerial imagery have reflectance characteristics according to tree species, crown shape and hierarchical status. This study suggested a method that identified individual trees and delineated crown boundaries through adopting gradient method algorithm to amplified greenness data using red and green band of aerial imagery. The amplification of specific band value improved possibility of detecting individual trees, and gradient method algorithm was performed to apply to identify individual tree tops. Additionally, tree crown boundaries were explored using spectral intensity pattern created by geometric characteristic of tree crown shape. Finally, accuracy of result derived from this method was evaluated by comparing with the reference data about individual tree location, number and crown boundary acquired by visual interpretation. The accuracy ($\hat{K}$) of suggested method to identify individual trees was 0.89 and adequate window size for delineating crown boundaries was $19{\times}19$ window size (maximum crown size: 9.4m) with accuracy ($\hat{K}$) at 0.80.

• 한국잠사곤충학회지
• /
• 제32권2호
• /
• pp.118-120
• /
• 1990

홍수로 침·관수되었던 뽕밭 밑 묘포의 피해 정도를 구명하기 위하여 1987년 7월 21일경 2-5일간 침·관수되었던 충남 부여군의 묘포 3필지와 뽕밭 1필지를 조사하는 한편, 침수 뽕밭에 금비를 추비하고 수량을 조사한 결과 다음과 같았다. 1. 2일 동안 침관수만 되었던 묘목은 침수부위의 잎은 삭은 채 살았으며, 5일동안 관수되었던 것 중 가지 끝이 나와 있던 것은 살았으나, 완전히 잠겨 있었던 것은 죽었다. 2. 뽕나무는 흐르는 물에 5일까지 침수되어도 가지 끝만 나와 있으면 피해가 없었다. 3. 뽕밭에 쌓인 황토펄을 분석한 결과 원래 토양의 pH는 5.52인데 비해 6.43이었고, 유기물과 유효인산이 각각 2.4%, 124ppm으로 비옥도가 높았으며, 식토로 사토인 뽕밭에 객토의 효과가 기대되었다. 4. 침수 뽕밭에 연간 금비 시비량의 30%를 추비한 결과 추기 수량이 무시구 대비 34%의 증수를 보인 것으로 보아, 침수에 의한 실소질의 손실이 일어났던 것으로 추정되었다.

• 한국패션뷰티학회지
• /
• 제1권1호
• /
• pp.105-118
• /
• 2003

The purpose of this study was to analyze entertainer Byeon Jeong-su's hair styles and thereby, apply the results to models. For the applications, models' hair styles were bisected into two sections, and thereby, the edges of the outsides were cut into solid points, and thereupon, into diverse bases by using vertical section, Perpendicular direction and square angles. On the other hand, the insides were cut in the same way of the outside bases by using radial section, varied combing and $45{\sim}90$ degree head angles. In addition, tops and sides were arranged in their corners, while a graduation technique was used to express a natural difference of levels. The fringes were cut by using free-hand and slicing techniques. furthermore, the quantity and mass of the hairs were treated with such techniques as thinning, swing, effect, rolling, slide and slicing, while a bridge product was used for coloring together with a highlight technique. The hair styles were rendered for straight and wave by using an magic iron machine. It was confirmed through this study that the same cutting techniques would result in different images depending on individuals' physical shapes, facial shapes, head skeletons and types of hairs. Thus, it is required of the hair designers to suggest their own custom hair designs adequate to individuals' images through continued image-wise hair design practices.

• 한국의류산업학회지
• /
• 제18권3호
• /
• pp.289-300
• /
• 2016

This study surveys children's costumes and games from the 11 Genre paintings by Junkeun Kim in the book "Korean Games(Stewart Culin 1858-1929)". The character of the general dress-costumes, games and the culture of life from the late $19^{th}$ century in genre painting of Junkeun Kim are as follows. The study results on the games are as follow. The boy's games are kite-flying, spinning tops, playing shuttlecock with the feet, blindman's buff, yut("Four-Stick Game"). Girl's games are seesaw with board, blindman's buff, marbles. Combined games are mount shoulder, sledge, tightrope walking for men with boy. The strengthen one's body type were seesaw with board, tightrope walking, the compete score type were playing shuttlecock with the feet, marbles and the multi complex type were yut("Four-Stick Game"), kite-flying. Through genre painting in the $19^{th}$ century we know a boy's 'Jeogori 'and 'Ba-ji' were similar to a modern man's and boy's 'Hanbok' with a traditional method of wearing. We believe that the originality of a traditional costume was an unchangeable characteristic. Girl's 'Jeogori' and 'Chi-ma' changed in length and width, and method of wearing; however, the basic shape did not change. The analysis for artist's genre painting which was ordered by a foreigner and the late of $19^{th}$ century's children's costume and game of life culture is useful to match the counters and show how to wear a modern Korean costume used to understand the 'Hanbok' and establish a costume of life.

• 한국의류산업학회지
• /
• 제19권5호
• /
• pp.579-588
• /
• 2017

This study investigates the wearing behavior and athleisure wear design preferences of women in their twenties as related to the design development of athleisure wear. A questionnaire survey was conducted on 185 women in their 20s. The survey was conducted from September to October 2016. Questionnaire items consisted of respondents' general items, athleisure wear and preference related items, and athleisure wear purchase related items. We collected 185 questionnaires from participants; subsequently, 169 were used as analytical data (except for incomplete questionnaires). The results of the study are as follows. Fit and wear comfort was the most important factor in the selection of athleisure wear. As a result of investigating the popularity of the athletic wear brand, the preference for the total sportswear brand was higher than the professional athletic wear brand. When the preferred colors were examined, the achromatic colors were ranked higher than chromatic colors. An examination of the preferred designs according to items indicated that the bra top preferred the 'U' shaped front plate and the 'Y' base basic type; in addition, T-shirts with the round neckline and the 1/4 length sleeves were preferred as tops. Leggings preferred long length type. It is necessary to develop a brand that matches the preference of the twenties' consumers by adjusting the aged target that can avoid the overheated competition and develop a niche market.

• 한국환경농학회지
• /
• 제13권2호
• /
• pp.175-182
• /
• 1994

색비름(Amaranthus tricolor L.) 유식물에 인공산성비 pH 2.0, 3.0, 4.0, 5.0 및 수도물(pH 6.5)을 엽면처리하여 생장, 색소 및 엽표면의 형태에 미치는 영향을 조사하였다. pH 3.0 이하에서는 지상부 및 근부가 다같이 생장이 심하게 억제되었으며 잎에는 괴사반점이 나타났다. 색소의 흡광 spectrum은 7개의 peak가 나타났는데 Early splendor는 473nm과 535nm에 peak가 없었고, Tricolor는 476nm 및 546nm에 peak가 보이지 않았다. 강산성비는 식물색소 발현에 관여하였고 엽록소는 pH가 낮을수록 증가하였다. 주사현미경에 의한 엽표면 관찰에서는 pH 5에서도 이상이 관찰되기 시작하고 pH 4 이하에서는 괴사가 급격히 진행되고 있었다.

• Structural Engineering and Mechanics
• /
• 제40권4호
• /
• pp.471-488
• /
• 2011

The Ting Kau Bridge in Hong Kong is a cable-stayed bridge comprising two main spans and two side spans. The bridge deck is supported by three towers, an end pier and an abutment. Each of the three towers consists of a single reinforced concrete mast strengthened by transverse cables and struts. The bridge deck is supported by four inclined planes of cables emanating from anchorages at the tower tops. In view of the heavy traffic on the bridge, and threats from typhoons and earthquakes originated in areas nearby, the dynamic behaviour of long-span cable-supported bridges in the region is always an important consideration in their design. Baseline finite element models of various levels of sophistication have been built not only to match the bridge geometry and cable forces specified on the as-constructed drawings but also to be calibrated using the vibration measurement data captured by the Wind and Structural Health Monitoring System. This paper further describes the analysis of axle loading data, as well as the generation of random axle loads and simulation of vibrations of the bridge using the finite element models. Various factors affecting the vehicular loading on the bridge will also be examined.