• 제목/요약/키워드: TN-LCD

검색결과 137건 처리시간 0.03초

반사형 LCD를 위한 홀로그래픽 반사판의 제작 (Fabrication of a holographic reflector for reflective LCDs)

  • 우성일
    • 한국광학회지
    • /
    • 제10권1호
    • /
    • pp.27-31
    • /
    • 1999
  • DuPont 社의 광폴리머를 홀로그램 기록매질로 사용하여, 반사형 LCD에 적용할수 있는 단색의 홀로그래픽 반사판을 설계 및 제작하였다. 홀로그램 동작파장을 514nm로 하여 기록함으로써, 녹색 영역에서 가장 밝은 이미지를 구현할 수 있었다. 이미지의 방행을 표면방사와 분이시킴으로써 높은 콘트라스트 미를 얻을수 있는데, 제작한 홀로그래픽 반사판을 TN-LC cell에 적용하여, 6:1의 on/off 콘트라스트 비를 얻었다.

  • PDF

폴리이미드막 표면에 직선 편광된 UV광 조사에 의한 프리틸트각 발생과 전기광학특성 (Pretilt Angle Generation and EO Performance in MLC with Polarized UV Light Irradiation Polyimide surface)

  • 서대식;이정호;이창훈
    • 한국전기전자재료학회논문지
    • /
    • 제11권10호
    • /
    • pp.878-884
    • /
    • 1998
  • We have investigated that the monodomain alignment of nematic liquid crystal (NLC) is obtained with polarized ultraviolet(PUV) light irradiation on polyimide (PI) surface. The LC alignment capability increases with increasing the UV light irradiation time. The polarized UV light irradiation on oblique angle of 60。 irradiated on PI surface rotated by 90。 at 10 min. after being normally irradiated on PI surface at 30 min., the generated pretilt angle of NLC is about 2.5。. The pretilt angle of NLC is attributed to the interaction between the LC molecules and the asymmetric triangular structure of polymer surface due to photo-depolymerization of polymer with the oblique UV light on PI surface. The voltage -transmittance and response time characteristics of photo-aligned twisted nematic (TN)-LCD with UV light irradiation time 60 min. were almost same in comparison with the rubbing-treated TN-LCD.

  • PDF

셀갭 변화에 따른 Flexible 기판 TN-LCD의 전기광학특성 (Electro-Optical Performances of Flexible Liquid Crystal Display on Twisted Nematic Mode according to Cell Gap)

  • 강희진;황정연;이휘원;김종환;서대식
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
    • /
    • pp.289-290
    • /
    • 2005
  • We have investigated the electro-optical (EO) performances of the flexible liquid crystal display (LCD) on twisted nematic (TN) mode according to variation of cell gap in comparison with glass LCD. There were four kinds of cells which were having cell gaps of 3$\mu$m, 4$\mu$m and 5$\mu$m, especially the lowest 2$\mu$m on flexible and glass substrates separately. The EO performances of the flexible cells on the rubbed potyimide (PI) were almost the same those of glass cells. The response time of flexible cells was shorter than that of glass cells but the alignment of liquid crystal (LC) of flexible cells was weaker than that of glass cells. The residual DC of flexible cells was on the increase like that of glass cells in compliance with lowering cell gap.

  • PDF

다결정질 Si TFT-LCD에서의 Flicker에 대한 Simulation 연구 (A Simulation Study on the Flicker Analysis for the Poly-Silicon TFT-LCD)

  • 손명식;송민수;유건호;허지호;경희대학교물리학과;경희대학교물리학과
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2001년도 하계종합학술대회 논문집(2)
    • /
    • pp.225-228
    • /
    • 2001
  • We simulated and analyzed the flicker phenomena in the poly-Si TFT-LCD using PSpice for the development of wide-area and high-quality LCD display We define the electric quantity of flicker in the TFT-LCD, which is the ratio of half frame frequency (30Hz) to DC (0 Hz) frequency. We compared two different types of TFTs, excimer laser annealed (ELA) poly-Si TFT and silicide mediated crystallization (SMC) poly-Si TFT, and found that the ELA and SMC TFTs show different flicker characteristics because of their mobility and leakage current. In addition, we showed that the gate voltage should be chosen carefully at the minimum flicker because of the larger leakage current of poly-Si Tn as compared with a-Si TFT

  • PDF

Blinking Backlight System과 Liquid Crystal Overdriving Methode를 사용한 TFT-LCD의 동영상 화질개선을 위한 연구 (The improvement of moving picture quality in TFT-LCD with Blinking Backlight System and Liquid Crystal Overdriving Methode)

  • 한정민;김종환;김영환;김귀열;서대식
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2005년도 춘계학술대회 논문집 디스플레이 광소자 분야
    • /
    • pp.146-149
    • /
    • 2005
  • In applying LCD to TV application, one of the most significant factors to be improved is image sticking on the moving picture. LCD is different from CRT in the sense that it's continuous passive device, whichholds images in entire frame period, while impulsetype device generate image in very short time. We realized articulate image generation similar to CRT by CCFL blinking drive and TN-LCD overdriving. As a result, reduced image sticking phenomenon was validated by naked eye and response time measureme.

  • PDF

고내열성 광폴리머 표면을 이용한 액정 표시 소자 연구 (Study of Liquid Crystal Device using a High Thermal Photopolymer)

  • 황정연;남기형;이상민;서대식;김재형;서동학
    • 한국전기전자재료학회논문지
    • /
    • 제17권1호
    • /
    • pp.65-69
    • /
    • 2004
  • We synthesized photoalignment material of high thermal resistance with hydroxyl aromatic polyimide, and studied the liquid crystal (LC) aligning capabilities on the photopolymer layers. Also, electro-optical (EO) performances for the twisted-nematic (TN)-liquid crystal display (LCD) photoaligned with linearly polarized UV exposure were investigated. A good LC alignment with UV exposure on the photopolymer surface can be obtained. However, the low pretilt angles were obtained below 1$^{\circ}$. The Voltage-transmittance (V-T) curve without backflow bounce in the photoaligned TN cell with UV exposure was observed. The response time of photoaligned TN cell was measured about 24 ms. Finally, The photoaligned TN cell has few hysteresis, and shows the residual DC voltage that is less.

기울어진 두 액정 층을 이용한 비틀린 네마틱 액정 셀의 시야각 조절 (The viewing angle switching of TN-LCD with two tilted LC layer)

  • 최민오;임영진;정은;이승희
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2006년도 학술대회 및 기술세미나 논문집 디스플레이 광소자
    • /
    • pp.45-46
    • /
    • 2006
  • We have studied the viewing angle control using a twist nematic liquid crystal display (TN-LCDs). These TK-LCDs have the characteristics, of which is not good image quality, for examples low Contrast ratio and gray scale inversion problems at upper and down viewing direction. TN-LCDs have the function of switching between the wide viewing mode and narrow viewing angle mode using two tilted LC layers. Tilt angles of the two LC layers, $14^{\circ}$ and $60^{\circ}$ were required in both wide viewing angle and narrow viewing angle modes, respectively. Consequently, this device is compatible with two image performances of which the wide viewing angle mode and Narrow viewing angle mode.

  • PDF

High Speed Response Time of Nematic Liquid Crystal Mixtures for LCD Monitor and TV Applications

  • Kim, Y.B.;Hur, I.K.
    • Journal of Information Display
    • /
    • 제2권3호
    • /
    • pp.32-38
    • /
    • 2001
  • The most important parameter for TV application of LCD is a fast switching time for the display of moving image. To achieve faster switching time, the novel LC single materials with large dielectric anisotropies ($16{\sim}20$), high clearing temperatures ($195.5{\sim}237.4^{\circ}C$), broad nematic ranges (up to 169.9 $^{\circ}C$) and high birefringence ($0.254{\sim}0.2200$) were developed. KUR-series LC mixtures blended these single materials having significantly higher clearing temperatures and dielectric anisotropy values compared with conventional LC mixture. Especially, their clearing temperatures are $10{\sim}30^{\circ}C$ higher than their host mixture. These LC mixtures showing about lOms of high-speed switching time in Tv/Monitor of TFT LCD, is short enough to be addressed in a single time frame of 60Hz (16.7 ms). The threshold voltage $V_{th}$ was low enough to operate at a driving voltage of 5 V. The VHR values were found to be high enough for TFT-LCD in wide temperature range. Our novel LC mixtures are suitable materials for the inclusion in to LC mixtures for TV application of TN-LCD

  • PDF

LCD 연구 개발 동향

  • 이종천
    • 전자공학회지
    • /
    • 제29권6호
    • /
    • pp.76-80
    • /
    • 2002
  • 'Liquid Crystal의 상전이(相轉移)와 광학적 이방성(異方性)이 1888년과 1889년 F. Reinitzer와 O. Lehmann에 의해 Monatsch Chem.과 Z.Physikal.Chem.에 각각 보고된 후 부터 제2차 세계대전이 끝난 뒤인 1950년대 까지는 Liquid Crystal을 단지실험실에서의 기초학문 차원의 연구 대상으로만 다루어 왔다. 1963년 Williams가 Liquid Crystal Device로는 최초로 특허 출원을 하였으며, 1968년 RCA사의 Heilmeier등은 Nematic 액정(液晶)에 저주파(低周波) 전압(電壓)을 인가하면 투명한 액정이 혼탁(混濁)상태로 변화하는 '동적산란(動的散亂)'(Dynamic Scattering) 현상을 이용하여 최초의 DSM(Dynamic Scattering Mode) LCD(Liquid Crystal Display)를 발명하였다. 비록 150V 이상의 높은 구동전압과 과소비전력의 특성 때문에 실용화에는 실패하였지만 Guest-Host효과와 Memory효과 등을 발견하였다. 1970년대에 이르러 실온에서 안정되게 사용 가능한 액정물질들이 합성되고(H. Kelker에 의해 MBBA, G. Gray에 의한 Cyano-Biphenyl 액정의 합성), CMOS 트랜지스터의 발명, 투명도전막(ITO), 수은전지등의 주변기술들의 발전으로 인하여 LCD의 상품화가 본격적으로 이루어지게 되었다. 1971년에는 M. Shadt, W. Helfrich, J.L. Fergason등이 TN(Twisted Nematic) LCD를 발명하여 전자 계산기와 손목시계에 응용되었고, 1970년대 말에는 Sharp에서 Dot Matrix형의 휴대형 컴퓨터를 발매하였다. 이러한 단순 구동형의 TN LCD는 그래픽 정보를 표시하는 데에는 품질의 한계가 있어 1979년 영국의 Le Comber에 의해 a-Si TFT(amorphous Silicon Thin Film Transistor) LCD의 연구가 시작되었고, 1983년 T.J. Scheffer, J. Nehring, G. Waters에 의해 STN(Super Twisted Nematic) LCD가 창안되었고, 1980년 N. Clark, S. Lagerwall 및 1983년 K.Yossino에 의해 Ferroelectric LCD가 등장하여 LCD의 정보 표시량 증대에 크게 기여하였다. Color화의 진전은 1972년 A.G. Ficher의 셀 외부에 RGB(Red, Green, Blue) filter를 부착하는 방안과, 1981년 T. Uchida 등에 의한 셀 내부에 RGB filter를 부착하는 방법에 의해 상품화가 되었다. 1985년에는 J.L. Fergason에 의해 Polymer Dispersed LCD가 발명되었고, 1980년대 중반에 이르러 동화상(動畵像) 표시가 가능한 a-Si TFT LCD의 시제품(試製品) 개발이 이루어지고 1990년부터는 본격적인 양산 시대에 접어들게 되었다. 1990년대 초에는 STN LCD의 Color화 및 대형화(大型化) 고(高)품위화에 힘입어 Note-Book PC에 LCD가 본격적으로 적용이 되었고, 1990년대 후반에는TFT LCD의 표시품질 대비 가격경쟁력 확보로 인하여 Note-Book PC 시장을 독점하기에 이르렀다. 이후로는 TFT LCD의 대형화가 중요한 쟁점으로 부각되고 있고, 1995년 삼성전자는 당시 세계최대 크기의 22' TFT LCD를 개발하였다. 또한 LCD의 고정세(高情細)화를 위해 Poly Si TFT LCD의 개발이 이루어졌고, 디지타이져 일체형 LCD의 상품화가 그 응용의 폭을 넓혔으며, LCD의 대형화를 위해 1994년 Canon에 의해 14.8', 21' 등의 FLCD가 개발되었다. 대형화 방안으로 Tiled LCD 기술이 개발되고 있으며, 1995년에 Sharp에 의해 21' 두장의 Panel을 이어 붙인 28' TFT LCD가 전시되었고 1996년에는 21' 4장의 Panel을 이어 붙인 40'급 까지의 개발이 시도 되었으며 현재는 LCD의 특성향상과 생산설비의 성능개선과 안정적인 공정관리기술을 바탕으로 삼성전자에서 단패널 40' TFT LCD가 최근에 개발되었다. Projection용 디스플레이로는 Poly-Si TFT LCD를 이용하여 $25'{\sim}100'$사이의 배면투사형과 전면투사형 까지 개발되어 대형 TV시장을 주도하고 있다. 21세기 디지털방송 시대를 맞아 플라즈마디스플레이패널(PDP) TV, 액정표시장치 (LCD)TV, 강유전성액정(FLCD) TV 등 2005년에 약 1500만대 규모의 거대 시장을 형성할 것으로 예상되는 이른바 '벽걸이TV'로 불리는 차세대 초박형 TV 시장을 선점하기 위하여 세계 가전업계들이 양산에 총력을 기울이고 있다. 벽걸이TV 시장이 본격적으로 형성되더라도 PDP TV와 LCD TV가 직접적으로 시장에서 경쟁을 벌이는 일은 별로 없을 것으로 보인다. 향후 디지털TV 시장이 본격적으로 열리면 40인치 이하의 중대형 시장은 LCD TV가 주도하고 40인치 이상 대화면 시장은 PDP TV가 주도할 것으로 보는 시각이 지배적이기 때문이다. 그러나 이러한 직시형 중대형(重大型)디스플레이는 그 가격이 너무 높아서 현재의 브라운관 TV를 대체(代替)하기에는 시일이 많이 소요될 것으로 추정되고 있다. 그 대안(代案)으로는 비교적 저가격(低價格)이면서도 고품질의 디지털 화상구현이 가능한 고해상도 프로젝션 TV가 유력시되고 있다. 이러한 고해상도 프로젝션 TV용으로 DMD(Digital Micro-mirror Display), Poly-Si TFT LCD와 LCOS(Liquid Crystals on Silicon) 등의 상품화가 진행되고 있다. 인터넷과 정보통신 기술의 발달로 휴대형 디스플레이의 시장이 예상 외로 급성장하고 있으며, 요구되는 디스플레이의 품질도 단순한 문자표시에서 그치지 않고 고해상도의 그래픽 동화상 표시와 칼라 표시 및 3차원 화상표시까지 점차로 그 영역이 넓어지고 있다. <표 1>에서 보여주는 바와 같이 LCD의 시장규모는 적용분야 별로 지속적인 성장이 예상되며, 새로운 응용분야의 시장도 성장성을 어느 정도 예측할 수 있다. 따라서 LCD기술의 연구개발 방향은 크게 두가지로 분류할 수 있으며 첫째로는, 현재 양산되고 있는 LCD 상품의 경쟁력강화를 위하여 원가(原價) 절감(節減)과 표시품질을 향상시키는 것이며 둘째로는, 새로운 타입의 LCD를 개발하여 기존 상품을 대체하거나 새로운 시장을 창출하는 분야로 나눌 수 있다. 이와 같은 관점에서 현재 진행되고 있는 LCD기술개발은 다음과 같이 분류할 수 있다. 1) 원가 절감 2) 특성 향상 3) New Type LCD 개발.

  • PDF

$90^{\circ}C$꼬인 네마틱 액정 ($90^{\circ}C$ Twisted-Nematic LC)의 이상 굴절 축($n_e$ axis) 방향 결정 방법에 대한 고찰 (Consideration into method of deciding upon extraordinary axis direction in Twisted-Hematic LC)

  • 조규보;신창목;서동환;배장근;김수중
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
    • /
    • pp.267-270
    • /
    • 2002
  • LCD is not very expensive and according to the principle that twisted-nematic LCD can modulate by electric signal, lots of researches been developed about many of theory, methods of design and calculating parameters effectively. In 1999 J. A. Davis et ai. proposed the method of deciding upon extraordinary and ordinary axis direction, which is based on Blazing Effect, inspect into changes of diffraction patterns. But in laboratory, it is difficulty to observe 5th or 6th diffraction pattern, and not clear in mathematical. In this paper, illuminating circular polarized beam been to TN LCD (twisted-nematic LCD), we found extraordinary axis direction with inspecting into maximum intensity distribution appeared in the side of analyzer Using Jones matrix method, we endowed with mathematical propriety.

  • PDF