• 제목/요약/키워드: TMS320C32

Search Result 113, Processing Time 0.033 seconds

Development of Hardware for Power System Stabilizer(PSS) (발전기 제어계통 안정화 장치용 하드웨어 개발)

  • Kim, C.K.;Park, M.K.;Kim, J.M.;Kweon, S.M.
    • Proceedings of the KIEE Conference
    • /
    • 2001.07a
    • /
    • pp.131-133
    • /
    • 2001
  • The basic function of a Power-System Stabilizer(PSS) is to add damping to the generator rotor oscillations by controlling its excitation using auxiliary stabilizing signals. To provide damping. the stabilizer must produce a component of electrical torque in phase with the rotor speed deviations. This paper introduces the hardware specifications and various functions of microprocessor (TMS320C32)-based digital PSS to provide the damping torque.

  • PDF

Improvement of learning performance and control of a robot manipulator using neural network with adaptive learning rate (적응 학습률을 이용한 신경회로망의 학습성능개선 및 로봇 제어)

  • Lee, Bo-Hee;Lee, Taek-Seung;Kim, Jin-Geol
    • Journal of Institute of Control, Robotics and Systems
    • /
    • v.3 no.4
    • /
    • pp.363-372
    • /
    • 1997
  • In this paper, the design and the implementation of the adaptive learning rate neural network controller for an articulate robot, which is being developed (or) has been developed in our Automatic Control Laboratory, are mainly discussed. The controller reduces software computational load via distributed processing method using multiple CPU's, and simplifies hardware structures by the time-division control with TMS32OC31 DSP chip. Proposed neural network controller with adaptive learning rate structure using expert's heuristics can improve learning speed. The proposed controller verifies its superiority by comparing response characteristics of conventional controller with those of the proposed controller that are obtained from the experiments for the 5 axis vertical articulated robot. We, also, present the generalization property of proposed controller for unlearned trajectory and the change of load through experimental data.

  • PDF

A DSP based Three Phase Power Quality Analyzer for Motor Drives (모터 구동장치를 위한 DSP기반 3상 전력품질분석 시스템)

  • 김우용;정영국;임영철
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • v.6 no.1
    • /
    • pp.27-33
    • /
    • 2001
  • This paper presents a digital instrument for a DSP based power quality analysis in three phase power system where current waveform is non-sinusoidal. it is based on stand alone type TMS320C31 DSP(digital signal processor)board and on a special high-speed data acquisition system. Power quality of low power motor drives are analyzed and processed by using a simple average power algorithm, and result of power analysis are displayed by LCD in the proposed system. This paper also goes on to discuss the performance of an instrument prototype, both in terms of accuracy and speed of measurement under the transient and steady state condition.

  • PDF

Implementation of 16Kpbs ADPCM by DSK50 (DSK50을 이용한 16kbps ADPCM 구현)

  • Cho, Yun-Seok;Han, Kyong-Ho
    • Proceedings of the KIEE Conference
    • /
    • 1996.07b
    • /
    • pp.1295-1297
    • /
    • 1996
  • CCITT G.721, G.723 standard ADPCM algorithm is implemented by using TI's fixed point DSP start kit (DSK). ADPCM can be implemented on a various rates, such as 16K, 24K, 32K and 40K. The ADPCM is sample based compression technique and its complexity is not so high as the other speech compression techniques such as CELP, VSELP and GSM, etc. ADPCM is widely applicable to most of the low cost speech compression application and they are tapeless answering machine, simultaneous voice and fax modem, digital phone, etc. TMS320C50 DSP is a low cost fixed point DSP chip and C50 DSK system has an AIC (analog interface chip) which operates as a single chip A/D and D/A converter with 14 bit resolution, C50 DSP chip with on-chip memory of 10K and RS232C interface module. ADPCM C code is compiled by TI C50 C-compiler and implemented on the DSK on-chip memory. Speech signal input is converted into 14 bit linear PCM data and encoded into ADPCM data and the data is sent to PC through RS232C. The ADPCM data on PC is received by the DSK through RS232C and then decoded to generate the 14 bit linear PCM data and converted into the speech signal. The DSK system has audio in/out jack and we can input and out the speech signal.

  • PDF

A study on implementing Moving Picture Transmission System through UBS (USB(Universal Serial Bus)에서의 동영상 전송시스템 구현에 관한 연구)

  • 이재형;박인규
    • Proceedings of the IEEK Conference
    • /
    • 1998.10a
    • /
    • pp.739-742
    • /
    • 1998
  • 실시간 동영상의 전송을 위해 본 논문에서는 USB를 전송매체로 하여 구현했다. USB는 키보드, 스태너, 모뎀등 다양하게 사용되고 있는 인터페이스를 한나로 통일하고, 포트의 부족을 해결하기 위해서 개발된 것으로 고속의 데어터전송(12Mbps)을 가능하다. USB의 고속데이터 전송의 특징은 정지화상(JPEG) 뿐만 아니라 실시간 동영상(MPEG1, MPEG2)의 전송을 가능하게 한다. 본 논문에서는 USB로 실시간 동영상 전송을 위한 시스템 구조를 제시하였고 보다 효율적인 데이터 전송을 위한 USB Data Transfer Type에 관해 연구하였다. 720×480의 동영상의 압축을 위해 기존의 널리 이용되는 DCT대신 wevelet 알고리즘을 이용하였고 실시간 압축과 복원을 위해 video compression codec인 adv601를 사용하여 동영상 및 정지화상압축을 하였다. 또한 DSP(TMS320C32)를 이용하여 Quantization Bin Width Calculation을 함으로써 video bit stream의 크기를 가변적으로 제어하려 하였다. 이로서 동영상의 전송시 발생될 수 있는 데이터 병목현상을 해결 하였고 USB뿐만 아니라 다양한 통신망{ISDN(128Kbps), T1(1.5Mbps) T3(45Mbps)}에서의 동영상의 실시간 전송이 가능한 시스템 구조를 제시하였다.

  • PDF

A Implementation of an Inverted Pendulum with Centrifugal Force using the NonLinear Sliding Mode Contrl (비선형 슬라이드 모드 제어를 적용한 원심력을 갖는 도립진자 제어기의 구현)

  • 황윤호;원태현;이만형
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 1995.10a
    • /
    • pp.606-609
    • /
    • 1995
  • To stabilize a satellite, a spin stabilization method is used for attitude control. The spin stabilization uses the centrifugal force of a pendulum damper which is tilted long boom, to stabilize the unstable satellite. In this paper, an inverted pendulum system is implemented which is similar to the spin stabilization method. Study on the velocity of the rotation axis and the inverted pendulum's angle stability is shown. We designed a controller using a 32bit TMS320C31 DSP for the CPU and also performances by PLD control and Sliding Mode Control is compared.

  • PDF

Development of Motor Drives for Machine Tools (공작기계용 모터 드라이브 개발사례)

  • 임형빈;노철원;최종률
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 1995.10a
    • /
    • pp.1009-1012
    • /
    • 1995
  • This paper presents an example of the development of motor drives for machine tools. Machine tools need motor drives with high control precision and performance. We developed a motor drive system that meets these requirements. The converter, the one component of drive system, adopts modular structure and high DC-link voltage. The drive which consists rest part of drive system is developed based on TMS320C32 DSP and state-of-the-art circuit technology. In this paper each developed parts are described in terms of its structure, specification and features.

  • PDF

Implementation of Brushless Linear Motor Drive using DSP (DSP를 이용한 브러쉬 없는 선형 모터 드라이브 구현)

  • Kim, Sang-U;Park, Jeong-Il;Lee, Gi-Dong;Lee, Seok-Gyu;Jeong, Jae-Han
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.19 no.8
    • /
    • pp.155-160
    • /
    • 2002
  • In this paper, a controller design for brushless linear motor is implemented. The designed controller is mainly composed of current, speed and position controller, which are carried out by the high-speed digital signal processor (DSP). In addition the PWM inverter is controlled by space voltage PWM method. This system is implemented by using 32-bit DSP (TMS320C31), a high-integrated logic device (EPM7192), and IPM (Intelligent Power Module) for compact and powerful system design. The experimental results show the effective performance of controller for the brushless linear motor.

Decomposition of EMG Signal Using MAMDF Filtering and Digital Signal Processor

  • Lee, Jin;Kim, Jong-Weon;Kim, Sung-Hwan
    • Journal of Biomedical Engineering Research
    • /
    • v.15 no.3
    • /
    • pp.281-288
    • /
    • 1994
  • In this paper, a new decomposition method of the interference EMG signal using MAMDF filtering and digital signal processor. The efficient software and hardware signal processing techniques are employed. The MAMDF filter is employed in order to estimate the presence and likely location of the respective templates which may include in the observed mixture, and high-resolution waveform alignment is employed in order to provide the optimal combination set and time delays of the selected templates. The TMS320C25 digital signal processor chip is employed in order to execute the intensive calculation part of the software. The method is verified through a simulation with real templates which are obtain ed from needle EMG. As a result, the proposed method provides an overall speed improvement of 32-40 times.

  • PDF

Dynamic Voltage Restorer Control Using $H_{\infty}$ Algorithm ($H_{\infty}$ 알고리즘을 이용한 Dynamic Voltage Restorer의 제어)

  • Chun, Yeong-Han;Kim, Ji-Won;Jeon, Jin-Hong
    • The Transactions of the Korean Institute of Electrical Engineers D
    • /
    • v.50 no.12
    • /
    • pp.561-565
    • /
    • 2001
  • Recent trend of increasing automated factories needs supply of high quality power from the utilities. Among the items of the power quality, voltage sag can be compensated by Dynamic Voltage Restorer(DVR). The key feature of the DVR is high response with less transient period to recover from the voltage sag due to the lightning or line-to-ground faults. In this paper we report that $H_{\infty}$ controller is very promising for the practical application to the controller of DVR. Experimental results shown in this paper was obtained by applying the control algorithm to 20 kVA DVR system. The experimental set consists of IGBT-based three phase inverter and the TMS320C32-60 DSP used for main processor of the control board. To simulate the 50% voltage sag, the SCR-based experimental set was constructed.

  • PDF