• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2006년도 하계 학술대회 논문집
• /
• pp.47-51
• /
• 2006

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2017년도 춘계공동학술대회
• /
• pp.73-73
• /
• 2017

가축의 영양소 요구량 유지, 비육, 증체, 생산, 번식, 계절환경에 따라 달라지는 변동요인을 감안하여 하루 동안에 필요로 하는 영양소 요구량을 충족하도록 여러 종류의 사료를 혼합한 TMR(Total Mixed Ration)사료의 중요성이 커지고 있다. 이에 가축의 생산성 향상(등급 향상)과 축산농가의 영농비용 절감, 생력화를 위해 범용적으로 사용가능한 TMR플랜트의 개발이 반드시 필요하다. 본 연구에서는 사료비절감을 위한 식품부산물 발효탱크의 개발을 통해 발효탱크 밑 부분을 구성하고 있는 스위프오거와 이를 고정하면서 Z축으로 회전하는 고정부를 대상으로 하여 시각화 할 수 있는 FEM 시뮬레이션 기법을 이용하여 작업 중 적용되는 하중에 대해 충분한 구조 안전성을 가지고 있는지 해석하였다. 스위프오거의 재질은 SM45C, 작용하는 하중은 감속기의 출력량, RPM을 이용하여 토크 값을 구하고 조사료와 부산물사료가 포함된 TMR사료의 무게와 스위프오거의 단면적을 이용하여 압력 값을 도출하였다. 하지만 부산물사료가 발효되면서 저장탱크를 통해 배출되기 때문에 전체 사료 무게가 줄어 스위프오거에 작용하는 압력 또한 작아지는 것을 확인하였다. 이에 본 연구에서는 저장탱크에서 TMR사료가 배출되기 직전의 가장 높은 압력 상태를 가정하였다. 이 가정을 통해 토크 값은 $1.4N{\cdot}m$, 압력 값은 43 Mpa으로 나타났고 이를 바탕으로 구조해석을 진행하였다. 그 결과 스위프오거는 고정단 부근에서 최대 폰 미세스 응력 310 Mpa이 발생하여 구조적으로 가장 취약한 것으로 나타났다. 하지만 이는 SM45C의 항복강도인 343 Mpa 보다 낮아 안전한 것으로 분석된다. 또한 사료가 배출되면서 스위프오거에 작용하는 압력이 작아져 폰 미세스 응력도 작아지는 것으로 나타났다.

• Journal of Biosystems Engineering
• /
• 제34권5호
• /
• pp.342-350
• /
• 2009

Currently TMR feed produced in commercial plant is one of the major source to feed cattle for both beef and dairy farm. However, because of lack of cutting and mixing system for utilizing domestic produced firmly baled round roughage in commercial TMR plant, these commercial TMR feed can not satisfy to farmers both in quality and price points of view. In order to solve these problems, a farm group size TMR plant model was developed in this study. The model plant was consist of round bale receiving and cutting system, pneumatic conveying system for transfer the roughage which was cut at the cutter to TMR mixer through pneumatic conveyor, TMR mixer enable to soften the stiff rice strew and to mix with other ingredients, finished feed bin which can be transfer to either packing system or individual farm, packing system by tycon bag which contains 400 kg unit and bulk unloading system to individual farmer. Also, a simulation model ARENA was applied to the model system in order to evaluate and check the production rate in each unit process and operation rate of total system and to find out if there are any clogged unit system obstructing the smooth flow of the total process flow. Processing cycle for produce one batch of the model plant was less than 30 minutes. Thus, it will take less than four hours for producing 16 tons per day equivalent to 1,000 beef cattle's daily feed.

• Journal of Biosystems Engineering
• /
• 제35권2호
• /
• pp.91-99
• /
• 2010

A Model of small scale total mixed rations(TMR) plant which can be utilized round bales was developed, tested and analyzed in this study. This study consist of two parts. One is development of a small scale TMR plant model which was already reported at the previous paper. This is the second part of the study. For the study, a series of tests of the model plant were performed and its costs was analyzed. Also, the break-even point of the model plant by comparing with market price of commercial TMR feed was determined. Results of the research are summarized as follows ; As the results of mixing test, the average coefficient of variation(CV) value for mixing of the feed was 13.0 % at the gate of the mixer. The production cost was estimated as 8,298 won/head for dairy cattle farm and 2,495 won/head for beef cattle farm, when producing 8 batch a day. Also, it is recommended to utilize the model plant when farm size is over 79 heads for dairy cattle farm and 113 heads for beef cattle farm. As an overall conclusion, the model plant designed for farm size TMR feed mill will be very useful model for both beef cattle and dairy farms in Korea. Also it is expected that the capital investment for the model plant can be recovered with 8 months compare with purchasing commercial TMR feed if the model plant feeds 1,000 beef cattle approximately.