• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.3
• /
• pp.252-255
• /
• 1999

The quality characteristics of the Korean traditional salt-fermented fish sauces, the traditional anchovy sauce (TAS) and the sandlance sauce(TKS) were evaluated comparing to the commercial anchovy sauce (CAS) and sandlance sauce (CKS). The acidity was higher in TKS than in TAS, whereas the contents of VBN, total-N and amino-N were higher levels in TAS. In color values, L and b values in TAS were generally higher than those in TKS, whereas a and ${\Delta}E$ values were higher in TKS. The contents of total free amino acids in TAS and TKS were $12.40\;g\%$ (w/v) and $9.549 g\%$ (w/v), respectively. The contents or six amino acids, alanine, glutamic acid, leucine, isoleucine, valine and Iysine were higher in TAS, whereas the contents of arginine, glutamic acid, leucine, alanine and valine were higher in TKS. Nucleotides such as IMP and hypoxanthine were principal components in both TAS and TKS. The nitrogen related compounds, TMAO, TMA and total creatinine were determined to be $108.8\;mg\%$ (w/v), $60.5\;mg\%$ (w/v), $62.4\;mg\%$ (w/v) in TAS, and those in TKS were $60.1\;mg\%$ (w/v), $24.1\;mg\%$ (w/v), $67.6\;mg\%$ (w/v), respectively.

• Journal of Fisheries and Marine Sciences Education
• /
• v.3 no.2
• /
• pp.47-72
• /
• 1991

To obtain the principal data for useful treatment and processing of Korean geoduck (Panope japonica A. ADAMS) which inhabit mostly at Dong-Hae coastal area in Korea, changes of $NH_2$-N, TMAO, TMA, total creatinine, protein composition and fatty acid composition in raw and blanched geoduck muscle during storage at $-20^{\circ}C$ were investigated. In addition, its chemical composition variation in the whole year was elucidated. The moisture content in geoduck muscle meat was 78.1% to 82% in the whole year. Particularly, in July its moisture content was maximum as 82% and in September minimum as 78.1%. Crude protein was in the range of 12.3-16.4%, crude lipid the average was 1.5%, crude ash on the average was 1.4%. The abundant fatty acids in geoduck muscle oil were $C_{16}$ : 0, $C_{16}$ : 1, $C_{18}$ : 0, $C_{18}$ : 1, $C_{20}$ : 5, and $C_{22}$ : 6 acids. During storage at $-20^{\circ}C$, content of unsaturated fatty acid such as eicosapentaenoic acid (EPA, $C_{20}$ : 5) and docosahexaenoic acid (DHA, $C_{22}$ : 6)in raw geoduck muscle decreased somewhat and the raw geoduck was slightly oxidized. Trimethylamine (TMA), volatile basic nitrogen (VBN)and $NH_2$-N of raw muscle increased compared to blanched muscle. Trimethylamine oxide (TMAO) was slightly decreased during the storage period. The muscle protein was approximately composed of 37% sarcoplasmic, 29% myofibrillar, 22% alkali soluble, and 12% stroma protein. Among several proteins, myofibrillar protein content decreased mostly, while the alkali-soluble and stroma protein content increased slightly during storage at $-20^{\circ}C$.

• The Journal of Advanced Prosthodontics
• /
• v.5 no.2
• /
• pp.153-160
• /
• 2013

PURPOSE. This in vitro study intended to investigate the mechanical and thermal characteristics of Valplast, and of polymethyl methacrylate denture base resin in which different esthetic fibers (E-glass, nylon 6 or nylon 6.6) were added. MATERIALS AND METHODS. Five groups were formed: control (PMMA), PMMA-E glass, PMMA-nylon 6, PMMA-nylon 6.6 and Valplast resin. For the transverse strength test the specimens were prepared in accordance with ANSI/ADA specification No.12, and for the impact test ASTM D-256 standard were used. With the intent to evaluate the properties of transverse strength, the three-point bending (n=7) test instrument (Lloyd NK5, Lloyd Instruments Ltd, Fareham Hampshire, UK) was used at 5 mm/min. A Dynatup 9250 HV (Instron, UK) device was employed for the impact strength (n=7). All of the resin samples were tested by using thermo-mechanical analysis (Shimadzu TMA 50, Shimadzu, Japan). The data were analyzed by Kruskal-Wallis and Tukey tests for pairwise comparisons of the groups at the 0.05 level of significance. RESULTS. In all mechanical tests, the highest values were observed in Valplast group (transverse strength: $117.22{\pm}37.80$ MPa, maximum deflection: $27.55{\pm}1.48$ mm, impact strength: $0.76{\pm}0.03$ kN). Upon examining the thermo-mechanical analysis data, it was seen that the E value of the control sample was 8.08 MPa, higher than that of the all other samples. CONCLUSION. Although Valplast denture material has good mechanical strength, its elastic modulus is not high enough to meet the standard of PMMA materials.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.9
• /
• pp.1515-1521
• /
• 2004

As one of the research series for the industrialization of sikhae, this study was evaluated the taste compounds present in different temperature conditions, $5^{\circ}C$, $20^{\circ}C$ and alternating temperature (stored at $5^{\circ}C$ after 10 days fermentation at $20^{\circ}C$), respectively. The changes in proximate compositions were negligible but the amounts of total sugar decreased during fermentation. The pH of sikhae products except the product fermented at $5^{\circ}C$, decreased during fermentation and was maintained at the rage of 3.8~4.4 after 10 days. The values of acidity, VBN and amino-N gradually increased with fermentation times and with increasing temperature condition in all products. Three organic acids (lactic, citric and malic acid) were disclosed as key compounds affecting the sourness in Alaska pollack sikhae. The result of taste value revealed that 6 amino acids having sweet and umami taste (aspartic acid, glutamic acid, alanine and lysine) and bitter taste (valine and methionine) as major amino acids affecting the taste of sikhae products, and increased with fermentation times. Hypoxanthine was the main component in ATP related compounds. Amino-N was comprised more over 50% of the Ex-N in sikhae products, and followed by total creatinine-N, TMAO-N and TMA-N in that order.

• Journal of Food Hygiene and Safety
• /
• v.1 no.1
• /
• pp.39-46
• /
• 1986

Comparison of ethylene oxide(E.O) fumigation and gamma irradiation on the sterilization, microbiological, physicochemcial and sensory quality of dried fishery products (shucked shellfish and mussel powder) were investigated. The viable cell count of mesophilic total bacterial was reduced by over 2 to 3 log cycles with irradiation of 3 to 5 kGy, and those samples were completely sterilized by irradiation dose of 7 to 10 kGy. In view of reduction of microorganisms, D10 value of each samples were ranged from 1. 36-1. 46 kGy. fungi, mesophilic spores, acid tolerant bacteria and coliforms were sterilized at 5 to 7 kGy irradiation but E.O. fumigation proved insulfficient to eliminate the mesophilic total bacteria and fungi. In the physicochemical and sensory quality of samples, such as the amino acid, TBA value, TMA-N, color difference and overall acceptability irradiated sample with optimum dose was similar to those of the nonirradiated sample, while E.O. fumigated sample was remarkably deteriorated in the physicochemical and sensory quality of samples.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.10a
• /
• pp.104-107
• /
• 2004

In this work, the blend of diglycidylether of bisphenol A (DGEBA) and modified polyurethane (PU) was prepared and characterized in the cure behaviors and mechanical interfacial properties. The N-benzylpyrazinium hexafluoroantimonate was used as a cationic initiator for cure, and the content of PU was varied within 0-20 phr. The cure behaviors and mechanical interfacial properties were studied by DSC, near­IR, and the critical stress intensity actor $(K_{IC})$ measurements. Also thermal stabilities were carried out by TMA and TGA analyses. As a result, the cure activation energy $(E_a)$ and the conversion $(\alpha)$ were slightly increased with increasing the PU content, and a maximum value was found at 10 phr PU. The mechanical interfacial properties measured from $K_{IC}$ showed a similar behaviors with the results of conversion. These results were probably due to the increase of the hydrogen bonding between the hydroxyl groups of DGEBA and isocyanate groups in PU.

• Korean journal of food and cookery science
• /
• v.6 no.2
• /
• pp.97-104
• /
• 1990

건조 수산가공품 및 혼합조미료 각 5종의 위생적 살균 및 저장방법의 개발을 목적으로 현행살균 방법으로 살균효과의 불충분, 제품의 품질저하, 약제성분의 잔유 등 많은 문제점을 내포한 ethylene oxide에 의한훈증처리와 방사선 조사와의 미생물 살균효과, 이화학적 특성 및 관능적 품질에 미치는 영향을 검토한 결과는 다음과 같다. 시료의 미생물 오염은 전 세균이 $10^3~10^7$ CFU/g으로 그중 90%이상이 내열성 세균이었으며, 곰팡이류는 $10^2~10^3$ CFU/g, 대장균도 시료 5종에서 $10^2~10^6$ CFU/g이나 오염되었다. 살균효과 실험에서 대장균군, 곰팡이류는 5~10 kGy 방사선 조사로서 완전 사멸되었으며, 전세균도 오염도가 매우 높았던 혼합조미료 몇종을 제외하고는 제거되었다. 반면, ethylene oxide훈증처리는 전 미생물의 살균이 불충분하였다. 이 화학적 특성 즉, TBA가 TMA-N 함량, 아미노산, 무기질, 색도 등은 적정 선량의 방사선 조사로서는 무처리구 시료와 거의 차이가 없었으나, ethylene oxide 훈증처리구는 심한 품질의 변화를 나타내었다. 또한 관능검사에 의한 전반적 기호성에 있어서도 방사선조사구가 무처리구 및 ethylene oxide 처리구보다 유의적으로 우수함을 나타냈다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.26 no.3
• /
• pp.456-461
• /
• 1997

Sodium lactateand sodium citrate, traditional food preservatives, were added to extend the shelf-life of the loow-salted Myungran-jeot, and various chemical and microbiological analyses were carried out with Muungran-jeot, and various chemical and microbiological analyses were carried out with Myungran-jeot femented at 1$0^{\circ}C$. pH was decreased in the beginning stage of fermentation and then increased, whereas the content of lactic acid was increased during fermentation. But, lactic acid production of the low-salted Myungran-jeot with preservative were lower than control. The NH$_2$-N content of the low-salted Myungran-jot with sodium citrate was increased in the beginning of fermentation and then decreased. Sodium citrate inhibited the productions of VBN and TMA during the fermentation of Myungran-jeot, whereas sodium lactate inhibited the productions of VBN and TBA. Sodium lactate inhibited the growths of proteolytic bacteris and fungi. The estimated shelf-lives of the Myungran-jeot with control, sodium lactate, and sodium citrate were about 11, 13, and 13 days, respectively.

• Korean Journal of Food Science and Technology
• /
• v.31 no.3
• /
• pp.727-733
• /
• 1999

Endo- and exoproteases were used to hydrolyze Alaska pollack processing scrap. In 2 stage hydrolysis, the optimal conditions by Protamex were: temperature, $45.8^{\circ}C$; pH, 6.73; enzyme concentration, 0.11%; time, 105.5 min, whereas those by Flavourzyme were: temperature, $42.0^{\circ}C$; pH, 6.54; enzyme concentration, 0.28%; time, 20.4 hrs. But, the optimal conditions of 1 stage hydrolysis by equal proportion of Protamex and Flavourzyme were: temperature, $52.9^{\circ}C$; pH, 6.3; enzyme concentration, 0.46%; time 10.9 hrs. The contents of carbohydrate and ash were higher in the 2 stage hydrolyzate than the 1 stage, while that of crude lipid was in the reverse order. There were no significant differences in the contents of moisture and crude protein between both methods. The contents of total creatine and IMP, and viable cell counts were higher in the 1 stage hydrolyzate than the 2 stage, while the contents of TMAO, TMA, and Hx was in the reverse order. But, there were no significant differences in the contents of amino-N and color between both methods. The free amino acid contents of the 1 and 2 stage hydrolyzate were 2,741.77 and 3,529.47 mg/100 mL, respectively.

• Bulletin of the Korean Space Science Society
• /
• 2010.04a
• /
• pp.25.4-26
• /
• 2010

We present a three-mirror anastigmat(TMA) optical system for New Generation GOCI. In order to reduce the ghost optimized filter and baffle. By using carefully chosen antireflective coating and tilted filter angle, we fulfilled the design SNR requirement of 1500. We then designed a new entrance baffle and an internal baffle capable of producing the ghost ratio better than 0.01% of the nominal signal. The entrance baffle limits FOV to $0.75^{\circ}$ (E/W) $\times$ $0.60^{\circ}$ (S/N), and prevents the system from strong sun illumination, and the internal baffle prevents stray and scattered ray from entering into the telescope cavity. From these filter and baffle design, we confirmed that the instrument signal to noise ratio can be met with the current conceptual opto-mechanical design.