• Journal of Preventive Medicine and Public Health
• /
• 제14권1호
• /
• pp.97-110
• /
• 1981

This study was conducted in order to investigate the status of harmful working environ ment on twelve rubber and ten chemical products manufacturing industries in Busan area over a period of five months from lune 1 to October 31, 1980. The summarized results were as follows: 1. The highest and lowest mean values of harmful environmental elements in workroom of rubber products manufacturing industries were noted in twisting (98.7dB) and coating department (77.3dB) to noise, molding ($6.43mg/m^3$) and forming ($1.33mg/m^3$) to dust, bonding (toluene 463.7ppm, xylene 457.8ppm and benzene 111.8ppm, respectively) and splicing (toluene 90.0ppm, xylene 83.3ppm and benzene 6.7ppm, respectively) to organic solvents, respectively. Also in chemical products manufacturing, they were noted in grinding (95.1dB) and shining department (76.8dB) to noise, packing ($4.30mg/m^3$) and staining ($3.20mg/m^3$) to dust, shining (393.3ppm and 375.0ppm, respectively) and varnishing(125.5ppm and 121.7ppm, respectively) to toluene and xylene, and scattering (51.8ppm) and mixing (23.9ppm) to benzene, respectively. 2. The mean values of harmful elements in workroom of rubber products manufacturing were 86.3dB to noise, $4.16mg/m^3$ to dust, 258.2ppm to toluene, 230.3ppm to xylene, and 5 4.0ppm to benzene, respectively. Also in chemical products manufacturing, they were 85.2dB to noise, $3.69mg/m^3$ to dust, 227.9ppm to toluene, 213.2ppm to xylene, and 36.3ppm to benzene, respectively. 3. Number of workers exposed to harmful working environment, over TLV, of a total 10,195 workers in rubber products manufacturing were 1,002(9.8%) to noise, 212 (2.1%) to dust, 1,581(15.5%) to toluene, 1,509(14,8%) to xylene, and 1,524(15.0%) to benzene, respectively. Number of workers exposed to harmful working environment, over TLV, of a 1,913 workers in chemical products manufacturing were 112(5.9%) to noise, 132(6.9%) to each organic solvent, respectively. 4. The values of noise and dust of rubber and chemical products manufacturing in 1980 were lower then those in 1977, but the value of organic solvent in 1980 was similar with that in 1977.

• 환경위생공학
• /
• 제11권3호
• /
• pp.53-61
• /
• 1996

The subject of this study was to analyse overviews of companies which exceed TLV by industry, hazardous factors, and to estimate the numbers of companies measured in 1993 and the implementation rate of working environment measurement by the act of industrial safety and health The result of this study was as follow. 1. The number of cases which exceed TLV was 5,937 companies. In distribution of excess companies by the scale of workers, small scale cases under the 49 workers were 3,150 companies(53.0%) of total cases, medium scale cases between 50 - 299 workers were 2,248 companies(37.9%), and large scale cases over 300 workers were 539 companies(9.1%). By the industry of excess companies, it was marked high rate in manufacture of fabricared metal products(except machinary and equipment), manufacture of textiles of each 1,048 companies(17.7%), and 1,018 companies(17.1%). By the area of excess companies, it was shown high rate in Kyeongki area marked 1,679 companies(28.3%) and Daegu-Kyeongbuk area were marked 1,417 companies (23.9%). By the hazardous factors of excess companies, noise was recorded high rate in 5,160 companies (86.9%), dust was shown in 1,245 companies(21.0%), organic solvent was marked 130 companies(7.9%). The number of excess factors by the company was 1.2. In this result, the more it was bigger scale companies, the more excess factors were much more and the more it was recorded higher rate in noise organic solvent heavy metals, etc. 2. The measured cases in institutes during 1994 were 1,596 companies, and excess cases were 157 companies(9.8%) among them. By the scale of workers, small scale cases under the 49 workers were 190 companies (17.9%) among 1,064 companies, cases of medium scale cases between 50-299 workers were 127 companies (27.9%) among 463 companies, and large scale cases over 300 workers were 31 companies(44.9%) among 69 companies. In this result industry of the highest rate shown was manufacture of basic metals in 20 companies exceeded among 53 companies (37.7%), and was manufacture of pulp, paper production in 14 companies exceeded among 40 companies(35.0%), and the excess rate were high in bigger scale. 3. Companies estimated by the data of excess cases and excess rate in 1993 were 30,474 implementation rate estimated for measurement of working environment was 34.3% of companies in korean industry. In this result, it was comparatively shown of measurement rate for the working environment in manufacture of pulp, paper product, manufacture of machinary and equipment n.e.c., and of high measurement rate and excess rate in manufacture of electrial machinary and apparatus, and manufacture of basic metals.

• 한국산업보건학회지
• /
• 제22권3호
• /
• pp.200-208
• /
• 2012

Objectives: This study investigated the performance of three separate units of a portable photoionization detector (PID, ppb-RAE 3000) for measuring volatile organic compounds (VOCs) in a laboratory. Methods: A laboratory evaluation of the accuracy, precision, and inter-instrumental variance of three separate units of a portable PID (ppb-RAE 3000) was performed. The evaluation was based on the preparation of a test air sample of known toluene or ethylacetate concentration in a Tedlar$^{(R)}$ bag. The test air sample was monitored and data were logged consecutively by the three PIDs. A certified gas of 50 ppm toluene was also monitored during the test to ensure the reliability of the generated test air sample. Four different concentrations ranging from 0.1 to 2 TLV were used and a series of five measurements for each concentration level was performed. The accuracy was evaluated using National Institute for Occupational Safety and Health (NIOSH) criteria. Results: The results from the oldest ppb-RAE3000 unit among the three test units generally fell outside the NIOSH recommended accuracy criteria of ${\pm}25%$, whereas the other two units produced results which were acceptable at, or greater than, 25 ppm of toluene, or 0.5 TLV. These units also met the NIOSH criteria for some ethylacetate measurements but the results were not consistent. Conclusions: Considering the inconsistent performance of these ppb-RAE 3000 units, this device may not be appropriate for use as an alternative to the standard measurement methods. However, it can serve good survey instruments to identify exposure sources or concentration profiles. For all applications, the ppb-RAE 3000 should be used with frequent calibration checks, additional validation using a reference material, and careful maintenance.

• 한국산업보건학회지
• /
• 제22권3호
• /
• pp.175-183
• /
• 2012

Objectives: This study developed a harmonized method for risk assessment based on the Hazard & Risk Evaluation of Chemicals (HREC) according to the Industrial Safety and Health Act (ISHA). Methods: Three preliminary studies, performed during 2010 and 2011 by the Occupational Safety and Health Research Institute and three academic research groups, were compared. The differences in risk assessment, especially in the dose-response assessment method, were analyzed. A new harmonized method for dose-response assessment was suggested and its applicability for the HREC was examined. Results: Considering the various steps of each dose-response assessment, the equivalent steps in quantitative correction, uncertainty factor 2 (UF2) for intra-species uncertainty, and UF3 for the experimental period in the uncertainty correction were relatively high. Using our new method, the total correction values (quantitative correction plus uncertainty correction) ranged from 72~15,789 to 30~60, and the ratio of the threshold limit value (TLV) to the reference concentration decreased from 12.8~1900 to 5.4~11.8. Furthermore, when we performed risk characterization by our new method, hazard quotient (HQ) values for chloroethylene, epichlorohydrin, and barium sulfate became 3.0, 14.1, and 1.13 respectively, whereas three previous studies reported HQ values of 7.1, 4580, and 87.3 considering reasonable maximum exposure (RME) conditions. HQs of the three chemicals were calculated to be 0.6, 2.4, and 0.1 respectively, when compared to their TLVs. Conclusions: Our new method could be applicable for the HREC because the total correction values and the ratio of TLVs were within reasonable ranges. It is also recommended that additional risk management measures be applied for epichlorohydrin, for which the HQ values were greater than 1 when compared with both reference values and the TLV. Our proposed method could be used to harmonize dose-response assessment methods for the implementation of risk assessment based on the HREC according to ISHA.

• 한국간담췌외과학회지
• /
• 제26권4호
• /
• pp.308-312
• /
• 2022

Backgrounds/Aims: Although body surface area (BSA)-based standard liver volume (SLV) formulae have been used for living donor liver transplantation and hepatic resection, hemi-liver volume (HLV) is needed more frequently. HLV can be assessed using right or left portal vein diameter (RPVD or LPVD). The aim of this study was to validate the reliability of using portal vein diameter ratio (PVDR) for assessing HLV in living liver donors. Methods: This study included 92 living liver donors (59 males and 33 females) who underwent surgery between January 2020 and December 2020. Computed tomography (CT) images were used for measurements. Results: Mean age of donors was 35.5 ± 7.2 years. CT volumetry-measured total liver volume (TLV), right HLV, left HLV, and percentage of right HLV in TLV were 1,442.9 ± 314.2 mL, 931.5 ± 206.4 mL, 551.4 ± 126.5 mL, and 64.6% ± 3.6%, respectively. RPVD, LPVD, and main portal vein diameter were 12.2 ± 1.5 mm, 10.0 ± 1.3 mm, and 15.3 ± 1.7 mm, respectively (corresponding square values: 149.9 ± 36.9 mm², 101.5 ± 25.2 mm², and 237.2 ± 52.2 mm², respectively). The sum of RPVD2 and LPVD2 was 251.1 ± 56.9 mm². BSA-based SLV was 1,279.5 ± 188.7 mL (error rate: 9.1% ± 14.4%). SLV formula- and PVDR-based right HLV was 760.0 ± 130.7 mL (error rate: 16.2% ± 13.3%). Conclusions: Combining BSA-based SLV and PVDR appears to be a simple method to predict right or left HLV in living donors or split liver transplantation.

• 한국산업보건학회지
• /
• 제3권1호
• /
• pp.91-98
• /
• 1993

This study was carried out to investigate characteristic of vinyl chloride emissioned from poly vinyl chloride extrusion process and to evaluate the efficiency of local exhaust ventilation system. Before local ventilation facility was constructed in poly vinyl chloride extrusion process, the average worker exposure to vinyl chloride was 3.15 ppm, which exceeded Threshold Limit Value of American Conference of Gorvernmental Industrial Hygienists (ACGIH-TLV), 1 ppm. lt is possible that vinyl chloride residues in the poly vinyl chloride resin was released or degased due to extrusion heat. The larger the width of vinyl tube become, the higher worker exposure to vinyl chloride was. It is estimated that vinyl chloride from vinyl chloride resin increased as amount of poly vinyl chloride resin extruded in the extrusion process increased. Canopy hood was an appropriate type for poly vinyl chloride resin extrusion process. This local exhaust ventilation has fan static pressure of 7.65 inch wg($190mmH_2O$, total volumetric flowlate of 4,796 CFM ($135.8m^3$/min) and fan power requirement of 12 hp (8.952 Kw). After this local exhaust ventilation was constructed there, the average concentration of worker exposure to vinyl chloride was reduced to be 0.46 ppm, which was below the Threshold Limit Value, 1 ppm. Also, the removal efficiency rate of vinyl chloride attained by local exhaust ventilation was 85.3%. It was a statistically significant (p<0.01).

• 환경영향평가
• /
• 제21권5호
• /
• pp.695-705
• /
• 2012

The purpose of this study is to investigate concentration level and characteristics of malodour substances generated from landfill site in C city. Also, it is tried to predict distribution of concentration level using ISCST3 model around landfill site. From the results, it can be confirmed that twelfth-class malodour substances such as ammonia, methyl mercaptan, hydrogen sulfide, dimethyl sulfate, dimethyl disulfate, toluene, acetaldehyde, styrene, propionaldehyde, butylaldehyde, n-Valeraldehyde, xylene were generated from landfill site. The levels of the malodour substances were lower than that of permeable concentration regulated by odor control law in Korea. However, the concentration of malodour substances including methyl mercaptan, hydrogen sulfide, acetaldehyde, and propionaldehyde exceeded threshold limit value(TLV). It was seemed that these substances caused the problem of offensive odor around circumstance of landfill. The concentration of malodour substances was higher in slant than in upper part of landfill. The concentrations of malodour substances measured at night time were shown higher level than those at night time because atmospheric condition was stable at night time. It showed that the concentration of malodour substances were higher in spring. The results of atmospheric diffusion model predicted that tolerance limit level of hydrogen sulfide and methyl mercaptan was detected within nearly 5km from the boundary of landfill.

• 한국환경과학회지
• /
• 제27권9호
• /
• pp.781-788
• /
• 2018

The volatile odor compounds emitted form a stuffing agent production process were quantified by ATD and GC-MS, and then odor causing compounds were identified by the method of EOI using each TLV. As the results, 72 odor compounds were detected and total concentration was turned up 87.6 ppmv level. In these compounds, aldehyde group is higher 45.49 ppmv than others group, the next is turn up the order of aliphatics, alcohols, esters, ketones. The EOA of aldehyde group show up 101,720 and 97.2%, respectively, the odor causing compounds were identified each of odor 2-Octenal 28.31%, Hexanal 24.06%, Valeraldehyde 16.07%, Butyraldehyde 9.69%, Heptanal 4.97%, Propionaldehyde 4.64%, Acetaldehyde 3.31%. The TLVs of 7 major odor compounds are lower value level of 0.001~0.0001 ppmv, odor causing even in trace level. We need to be concerned with reduction of aldehyde compounds in the odor problem by a stuffing agent production process or ironing process of the textile containing a stuffing agent.

• 한국보건간호학회지
• /
• 제9권2호
• /
• pp.104-114
• /
• 1995

This study was designed to develop preventing occupational disease programme in small-medium scale industries. The intervention was done in 354 enterprises from July to December in 1993 by health personnels in mobile occupational health centers. The summarized results of the above achievements were as follows. 1. Total number of enterprises were 354. Among them $66.9\%$ was under 100 workers, $26.6\%$ was u!1der 200 workers, and $6.5\%$ was belong to over 200 workers. The majority manufactures were non-metallic mineral product industries $(11.3\)$ fabricated metal product industries $(11.0\%)$. and textile industries $(10.7\%)$. 2. In 1993, for 350 enterprises were carried out evaluation of workplace environment. A total of $76.3\%$ industries were found to improper showing higher level of hazardous agent than the TLV. Noise and dust are the typical agent of which levels in workplace were high in most of industries. 3. A total 60 cases $(0.8\%)$ of occupational diseases were detected through physical check-up from 7,394 industrial workers in 1993. Detection rate by hazardous agent was highest among workers in relation to dust, and secondly highest to noise. 4. Through the systematic approach by hazardous agent was increased to the monitoring of work condition and follow up care of occupational disease. In future, there should be development in the scaled check list of preventing occupational disease management.

• 한국산업보건학회지
• /
• 제9권2호
• /
• pp.1-18
• /
• 1999

The purpose of this study was to compare performances of two analytical methods, the OSHA 42 and the NIOSH 5522, of quantifying total isocyanates in air. These methods were compared in terms of accuracy and precision and the detection limits using four(4) spiked samples in each of four(4) concentration levels which ranged from 0.25 to 2.0 times of the ACGIH TLV-TWA. In addition, two methods were used to as sess airborne concentrations of total isocyanates at the following processes including autobody spray painting, furniture spray painting, polyurethane foaming, urethane adhesion, UV coating, and pigment mixing. The results of this study showed that the NIOSH 5522 method was better than the OSHA 42 method in terms of accuracy, precis ion, and detection limit for quantifying airborne total isocyanates. It was also clear that the NIOSH method was capable of detecting not only monomeric but also non-monomeric isocyanates. The results of air concentrations of total isocyanates among processes studied indicate that some processes may exceed the recommended level of isocyanates. In addition, to evaluate toxicological effects of total isocyanates, it is recommended to consider additive effects of isocyanates present in mixtures.