• 제목/요약/키워드: TKN

검색결과 94건 처리시간 0.027초

하천오염분석에 관한 연구 (A Study on the Stream Pollution Analysis)

  • 김건흥
    • 물과 미래
    • /
    • 제19권4호
    • /
    • pp.321-328
    • /
    • 1986
  • Warburg 실험장치와 회분식 폭기조를 사용하여 하천의 저질을 대상으로 징생물에 의한 분해가능물질의 처리정도와 화학적산소요구량, 총유기성 및 암모니아성 질소, 총유기탄소의 변화를 측정하였다. Warburg 실험장치는 빛을 차단하고 2$0^{\circ}C$로 운영하여 징생물의 시료에 대한 산소소비율, 탈산소계수, 일단계 탄소화합물의 생화학적 산소요구량을 구했으며, 회분식 폭기조는 실혼에서 운영하여 폭기에 의한 COD, TKN 및 TOC의 시간별 처리도를 구하여 상관관계를 조사하였다. 실험결과 시료의 TOC는 매우 높았으나 Warburg 실험장치에 의해 48시간 운영한 후, 초기 TOC의 10% 미만이 징생물에 의한 분해가능 물질로 나타났으며 이들의 상관관계는 찾지 못하였다. 순간산소요구량이 커서 하천의 준설등에 의해 급격히 용존산소가 소비되 수질을 악화시킬 염려가 있었다.

  • PDF

혐기/호기 순산소 생물막공법에 의한 산업폐수의 유기물 및 TKN 제거 성능평가 (Performance Evaluation for the A/O Pure-Oxygen Biofilm (POB) Process on the Removal of Organics and TKN in the Industrial Wastewater)

  • 장암;김홍석;김인수
    • 대한환경공학회지
    • /
    • 제22권5호
    • /
    • pp.837-847
    • /
    • 2000
  • 고농도의 유기물과 질소성분을 포함하는 맥주공장과 석유화학 산업폐수를 처리하기 위하여 실험실 규모의 혐기/호기 순산소-생물막 공정 (POB)이 이용되었다. 그리고 A/O POB process와 장기폭기법의 경제성분석도 수행되었다. TOC 농도기준으로 70에서 150 mg TOC/L 범위의 맥주공장폐수가 유입되었을 때 TOC 제거율은 각각 92% 이상으로 좋은 효율을 보였다. 석유화학폐수의 경우 초기 TOC제거율은 52%로 매우 낮았지만 32일 이후에는 86%의 TOC 제거율을 나타내었으며, TKN의 제거율은 유입부하가 증가함에도 불구하고 27일 이후에 71%의 제거율로 유지되었다. 순산소 생물막공법은 초기 건설비인 순산소 발생장치 (PSA)와 메디아 설치비가 소요되기 때문에 장기폭기법에 비하여 약 2.9배 정도 높았다. 이에 반해서 순산소 생물막공법은 극히 적은 잉여슬러지 발생량과 슬러지의 재순환의 불필요, 낮은 에너지 소요량 등의 많은 장점들로 인하여 운전비와 유지비가 약 2.5배 정도 장기폭기법 보다 적었다. 그러므로 장기적인 측면에서 보면 순산소 생물막공법이 높은 처리효율을 가지면서도 장기폭기법보다 경제적인 것으로 생각된다.

  • PDF

Slaughterhouse wastewater treatment in a bamboo ring anaerobic fixed-bed reactor

  • Tritt, Wolfgang P.;Kang, Ho
    • Environmental Engineering Research
    • /
    • 제23권1호
    • /
    • pp.70-75
    • /
    • 2018
  • A pilot scale anaerobic fixed-bed with a reactor volume of $2.8m^3$ was built to treat slaughterhouse wastewater. Bamboo rings were chosen as support media mainly because of their cheaper price in underdeveloped countries. Even with their lower porosity and specific surface, the reactor performance showed a maximum 95% COD removal efficiency at an organic loading rate (OLR) of $1kg\;COD/m^3-d$ with its corresponding hydraulic retention time (HRT) of 7.5 d. At a higher OLR of $4.0kg\;COD/m^3-d$, the COD removal efficiency of 75% was achieved with an HRT of 2 d. No big difference in COD removal efficiencies was found between the reactors operated in both upflow and downflow modes. Their operational behavior and effluent characteristics were similar. The effluent COD/TKN ratio of 6.67 at an OLR of $4.0kg\;COD/m^3-d$ was only marginal acceptable range for a subsequent biological denitrification process. Otherwise carbon supplementation is required at a lower OLR.

상향류식 고정생물막조를 이용한 오염소하천 정화에 있어서 유출수 농도 예측 (Prediction of Effluent Concentration for Contaminated Stream Purification using UFBR)

  • 박영식;문정현;안갑환
    • 한국습지학회지
    • /
    • 제4권1호
    • /
    • pp.87-95
    • /
    • 2002
  • The objective of this study is to treat contaminated stream by using a UFBR(upflow fixed biofilm reactor) packed with waste-concrete media. This system was tested from June 1999 to January 2000. Over $20.0^{\circ}C$, $COD_{cr}$ removal efficiency did not affected with organic loading rate while, $COD_{cr}$ removal efficiency decreased about 7% with decrease of temperature from $27.0^{\circ}C$ to $8.7^{\circ}C$. Under $16^{\circ}C$, TKN removal efficiency was affected with TKN loading rate. The proposed model apply to mass balance equation of fixed biofilm reactor for predicting effluent was well satisfied with measured value($R^2=0.94$).

  • PDF

ASM No. 2d를 이용한 생물학적 질소, 인 제거 공정의 최적 설계 및 운전인자 고찰 (Optimal Design and Process Parameters of Biological Nutrent Removal Processes using Activated Sludge Model No.2d)

  • 안호철;박명균;유희찬;김대성;안원식;허용록
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2006년도 학술발표회 논문집
    • /
    • pp.1400-1404
    • /
    • 2006
  • 생물학적 질소, 인 제거 공정(이하 BNR)의 운전에 있어서 최적 유입수의 C/N(COD/TKN)비, SRT 및 온도의 범위 및 정량적 수치 등은 유기물 뿐 만아니라 질소, 인의 처리 효율에 있어서 매우 중요하다. 특히, 외국과 다른 저농도 유기물 특성을 보이는 국내 하수에 대해서는 BNR 공정의 선택과 설계 및 운전인자의 선별이 무엇보다도 중요한 역할을 한다. 본 연구에서는 IAWQ에서 제시한 ASM No.2d를 기초로 하여 만들어진 전산모형인 Envirosim사의 Biowin 프로그램을 시뮬레이션 도구로 활용하여, 국내 하수에 비교적 적용하기 용이한 A2/O 공정과 MUCT 공정에 대한 유기물, 질소 및 인처리 효율을 비교하고 유입수의 C/N와 SRT 및 온도에 따른 질소, 인 처리 특성과 유출수의 거동 등을 파악하였다. 시뮬레이션 결과, 국내 하수에서는 A2/O 보다는 MUCT 공정이 질소, 인 처리효율이 더 크게 나타났다. 온도와 SRT가 일정한 상태에서 C/N비는 7이상에서 TKN과 TP제거효율이 양호하게 나타났고, 온도와 C/N비를 일정한 조건에서는 SRT가 7일을 넘어서면 효율이 급격히 낮아지는 현상을 관찰할 수 있었다. 온도조건 실험에서는 $20^{\circ}C$이하, 특히 국내 하수처리장에 BNR 적용시 설게조건인 $13^{\circ}C$에 근접해서는 TKN의 제거효율은 급격히 떨어지는 반면에 인 제거효율이 상승하는 것으로 나타났다.

  • PDF

Physical, Chemical and Biomethanation Characteristics of Stratified Cattle-Manure Slurry

  • Ong, H.K.;Pullammanappallil, P.C.;Greenfield, P.F.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제13권11호
    • /
    • pp.1593-1597
    • /
    • 2000
  • In the quiescent state, cattle-manure slurry stratifies into three discernible layers, namely a floating scum layer, a bottom sludge layer and a watery middle layer. The proportions of top (scum), middle and bottom (sludge) layers were approximately 20, 60 and 20% respectively of the volume of the whole slurry. Particulate matter from the different stratified layers was characterised for particle size distribution and cellulose, hemicellulose and lignin composition. Total solids concentrations of top, middle and bottom layers were 12.7, 2.8 and 7.4% respectively. Larger particles were found in the top layer compared with the bottom. The top layer contained the highest amounts of Neutral Detergent Fibre (NDF), Acid Detergent Fibre (ADF), cellulose and hemicellulose, but the lowest amount of Total Kjeldahl Nitrogen (TKN). The bottom layer contained the highest amounts of Acid Detergent Lignin (ADL) and TKN. With increase in particle size, there were increases in NDF, ADF, cellulose and hemicellulose, accompanied by decreases in ADL and TKN. Biochemical methane potential of the three layers was also measured. The top layer was found to produce the most methane with the middle layer producing the least. Biomethanation rate from the top layer was also the highest. Differences in biomethanation rates and biochemical methane potential were attributed to differences in chemical composition of the particulate matter. About 48%, 23% and 30% of the total chemical oxygen demand (COD) in the top, middle and bottom layers respectively of the slurry was found to be degradable.

무산소-혐기-호기법에서 유기기질제거와 질산화의 동역학적 해석 (The Kinetic Analysis on Organic Substrate Removal and Nitrification in Anoxic-Anaerobic-Aerobic Process)

  • 채수권
    • 한국물환경학회지
    • /
    • 제23권5호
    • /
    • pp.689-696
    • /
    • 2007
  • Kinetic analysis was important to develope the biological nutrient removal process effectively. In this research, anoxic-anaerobic-aerobic system was operated to investigate kinetic behavior on the nutrient removal reaction. Nitrification and denitrification were important microbiological reactions of nitrogen. The kinetics of organic removal and nitrification reaction have been investigated based on a Monod-type expression involving two growth limiting substrates : TKN for nitrification and COD for organic removal reaction. The kinetic constans and yield coefficients were evaluated for both these reactions. Experiments were conducted to determine the biological kinetic coefficients and the removal efficiencies of COD and TKN at five different MLSS concentrations of 5000, 4200, 3300, 2600, and 1900 mg/L for synthetic wastewater. Mathematical equations were presented to permit complete evaluation of the this system. Kinetic behaviors for the organic removal and nitrification reaction were examined by the determined kinetic coefficient and the assumed operation condition and the predicted model formulae using kinetic approach. The conclusions derived from this experimental research were as follows : 1. Biological kinetic coefficients were Y=0.563, $k_d=0.054(day^{-1})$, $K_S=49.16(mg/L)$, $k=2.045(day^{-1})$ for the removal of COD and $Y_N=0.024$, $k_{dN}=0.0063(day^{-1})$, $K_{SN}=3.21(mg/L)$, $k_N=31.4(day^{-1})$ for the removal of TKN respectively. 2. The predicted kinetic model formulae could determine the predicted concentration of the activated sludge and nitrifier, investigate the distribution rate of input carbon and nitrogen in relation to the solid retention time (SRT).

A/O 및 A2/O공정의 생물학적 인제거 특성비교 (Comparison of Biological Phosphorus Removal Characteristics between A/O and A2/O Process)

  • 김광수;서규태;이경호;김낙주
    • 한국물환경학회지
    • /
    • 제18권2호
    • /
    • pp.123-130
    • /
    • 2002
  • Bench scale experiments were carried out with two biological nutrient removal(BNR) units, A/O and $A^2O$ processes, to investigate the behavior of phosphorus in the system and to compare the characteristics of phosphorus removal in two BNR processes. To achieve this goal, COD/T-P and COD/TKN ratios of the influent was varied in the range of 23~64 and 5~24, respectively. In A/O process, influent COD/T-P ratio should be kept higher than 44mg/L to meet the final effluent T-P concentration lower than 1mg/L and in $A^2/O$ process, influent COD/T-P and COD/TKN ratios higher than 56 and 10, respectively, were required for good phosphorus release and uptake with no influence of nitrate nitrogen in return sludge. At this conditions, the rate of phosphorus release in the anaerobic basin should be kept higher than 0.1 kg S-P/kg MLVSS d In A/O process, the phosphorus content of anaerobic and aerobic sludges was increased as SRT of total system was becoming longer resulting in decreasing the difference of phosphorus content between two sludges while phosphorus release in anaerobic basin and phosphorus uptake in aerobic basin was not incident. In $A^2/O$ process, the phosphorus content of anaerobic and aerobic sludges were not increased with higher SRT of total system due to the relatively high nitrate concentration in return sludge. However, the difference of phosphorus content between anaerobic and aerobic sludges was incident when phosphorus release and uptake was observed.

강우시 산업단지에서의 오염물질 유출특성 (Characterization of Stormwater Pollutants Runoff in Industrial Complex)

  • 박기웅;이준호;최종수
    • 대한환경공학회지
    • /
    • 제22권2호
    • /
    • pp.341-353
    • /
    • 2000
  • 본 연구의 목적은 산업단지 유역에서 강우시 유출수를 조사하여 수질변동과 초기유출 특성 등 오염물질 유출특성을 파악함에 있다. 조사대상유역은 청주산업단지내 유역특성이 상이한 8개 소유역을 선정하여 1997년 6월부터 1998년 8월까지 조사하였다. 분석항목은 $BOD_5$, COD, SS, $NO_3-N$, TKN, $PO_4-P$, TP, n-Hexane 추출물질, Cr, Cu, Pb, Fe 등 중금속이다. 강우시 산업단지에서 발생하는 유출수의 농도범위는 $BOD_5$, COD, SS, $NO_3-N$, TKN, $PO_4-P$, TP, n-Hexane 추출물질 Cr, Cu, Pb, Fe에 대해 각각 2~324 mg/L, 5~810 mg/L, 1~1.110 mg/L, 0.01~10.89 mg/L, 0.1~59.8 mg/L, 0.08~7.02 mg/L, 0.1~7.8 mg/L, 0.1~1,723.6 mg/L, 0.001~0.363 mg/L, 0.001~0.488 mg/L, 0.001~1.28 mg/L, 그리고 0.26~18.91 mg/L으로 분석되었다. 또한, 초기유출현상에 대하여 수량화하였으며, 불투수층면적 비율이 증가할수록 초기유출현상의 발생빈도가 증가하는 것으로 분석되었다.

  • PDF

강우시 산업단지에서의 유출오염부하량 원단위 산정 (Pollutants Unit Loadings of the Stormwater Runoff in Industrial Complex)

  • 이준호;방기웅;최종수
    • 대한환경공학회지
    • /
    • 제22권2호
    • /
    • pp.355-362
    • /
    • 2000
  • 본 연구의 목적은 산업단지의 개별공장 및 유사한 공장이 밀집된 유역을 대상으로 유출수를 분석하여 유량가중평균농도를 산정하고, 이를 기초로 하여 업종별 유출오염부하 원단위를 산정하는데 있다. 1997년 6월부터 1998년 8월까지 청주산업단지를 대상으로 유량 및 수질을 조사하였다. 분석결과를 기초로 산정된 조사지점별 EMC 범위는 $BOD_5$, COD, SS, TKN, TP, HEM, $NO_3-N$, $PO_4-P$, Cr, Pb, Cu, Fe에 대해 각각 11~176mg/L, 40~502mg/L, 23~633mg/L, 1.04~20.9mg/L, 0.22~7.51mg/L, 12.7~548.7mg/L, 0.06~2.66mg/L, 0.12~3.39mg/L, 0.01~0.50mg/L, 0.02~0.42mg/L, 0.01~0.15mg/L, 1.29~11.51mg/L로 산정되었다. 또한, 강우시 산업단지에서 유출하는 년평균 오염부하 원단위는 $BOD_5$, COD, SS, TKN, $NO_3-N$, $PO_4-P$, TP, HEM, Cr, Pb, Cu, Fe에 대해 각각 374.4 kg/ha/yr, 924.1kg/ha/yr, 983.6kg/ha/yr, 48.8kg/ha/yr, 8.1kg/ha/yr, 9.7kg/ha/yr, 17.8kg/ha/yr, 943.0kg/ha/yr, 0.7kg/ha/yr, 0.9kg/ha/yr, 0.3kg/ha/yr, 28.9kg/ha/yr로 산정되었다.

  • PDF