• Journal of the Korea Fashion and Costume Design Association
• /
• v.16 no.2
• /
• pp.151-161
• /
• 2014

This study suggests method of expression of nail art utilizing Salvador Dali's Paranoiac Critical Method and produced the actual works based on discussions on Salvador Dali's painting, Paranoiac Critical Method, Nail Art's artistry and technique of expression. The result of the study is as follows: 1) Characteristic of Dali's painting is a Paranoiac Critical Method. If suggesting this characteristic in a method of expression of nail art, a good work which can be expressed on a small space, a nail, representing Dali is selected and 5 tips which are very similar to the rate of the painting are used in order to obtain an aesthetic effect just like a painting. And after composing on tips using the whole paining or part of painting, actual techniques of expression such as Hand Painting, Protranse or Water Decal are used. 2) the result of nail art produced utilizing Dali's Paranoiac Critical Method is as follows. Most of all, for nail art I with the topic of "The Persistence of Memory" (1931), after giving changes to 5 tips for the watch which is a part of the painting, Hand Painting technique is used using Acrylic Painting with colors which are similar colors to the painting. Then for nail art II which adopted "Slave Market with Invisible Bust of Voltaire" (1940), the whole painting is divided into 5 tips and Protranse technique which attaches printed paper onto nails was used. Lastly, for nail art III with the subject of "The Enigma of Desire My Mother, My Mother, My Mother" (1929), Water Decal which is emphasizing the parts of the painting and composing on 5 tips and copying printed picture onto Water Transfer Paper in order to attach on the nails is used. These nail arts show aesthetic characteristics such as fantasy, unconsciousness, grotesque, infinity, non-realism and horror just like paintings.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.04a
• /
• pp.80-80
• /
• 2019

This study describes an efficient and widely applicable droplet-vitrification following cryopreservation for shoot tips of (Fragaria x ananassa DUCH. cvs. 'Derunoka' and 'Jumbo pure berry'. The shoot tips of strawberry were precultured in Murashige and Skoog (MS) liquid medium supplemented with sucrose (0.3-0.7M). Precultured explants were treated with loading solution (LS, C4) containing glycerol 17.5% and sucrose 17.5% for 40 min and exposed to dehydration solution (B1) containing 50% of glycerol and 50% of sucrose for 60 min at $25^{\circ}C$, and then transferred onto droplets containing $2.5{\mu}l$ PVS3 on sterilized aluminum foils ($4cm{\times}0.5cm$) prior to direct immersion in liquid nitrogen (LN) for 1 h. The highest regeneration rate (%) was obtained when shoot tips were precultured with treatment-2 (exposing of shoot tips to MS + 0.3M Sucrose for 30 h and then treated with MS+0.5 M sucrose for 16 h) at $25^{\circ}C$ in both the cultivars. The viability of cooled samples, followed by culturing on MS medium for 4 weeks was 77.8% and 60.0% for 'Derunoka' and 'Jumbo pure berry', respectively. This result shows droplet-vitrification would be a promising method for cryobanking strawberry germplasm.

• Korean Journal of Plant Resources
• /
• v.31 no.6
• /
• pp.675-683
• /
• 2018

This study describes an efficient and widely applicable droplet-vitrification following cryopreservation for shoot tips of Chrysanthemum morifolium (Ramat.) cvs. 'Borami' and 'Yes morning'. The shoot tips of Chrysanthemum were precultured in Murashige and Skoog (MS) liquid medium supplemented with sucrose (0.3-0.7 M). Precultured explants were treated with loading solution (LS, C6) containing glycerol 20% and sucrose 20% for 30 min and exposed to dehydration solution (B5) containing 40% of glycerol and 40% of sucrose for 60 min at $25^{\circ}C$, and then transferred onto droplets containing $2.5{\mu}l$ PVS3 on sterilized aluminum foils ($4cm{\times}0.5cm$) prior to direct immersion in liquid nitrogen (LN) for 1 h. The highest regeneration rate (%) was obtained when shoot tips were precultured with treatment-2 (exposing of shoot tips to MS + 0.3M sucrose for 30 h and then treated with MS+0.5 M sucrose for 16 h) at $25^{\circ}C$ in both the cultivars. The viability of cooled samples, followed by culturing on $NH_4NO_3$-free MS medium for first 5 days was increased to two-fold (80.7%) regrowth rate over those cultured on normal MS medium or MS medium containing plant growth regulators. This result shows droplet-vitrification would be a promising method for cryobanking chrysanthemum germplasm.

• Korean Journal of Plant Resources
• /
• v.36 no.6
• /
• pp.571-579
• /
• 2023

In this study, cryopreservation by droplet-vitrification was applied to pear (Pyrus spp.) germplasm. We focused on the development and assessment of various strategies for the selection of suitable tissue, osmoprotection, and dehydration. We also evaluated post-thaw recovery of cryopreserved explants by droplet-vitrification. Preferentially, we tested the effects of preculture and loading treatments to determine which tissues were more suitable, either the apical shoot tips or the axillary buds. Apical shoot tips showed the better regrowth rate than in vitro axillary buds. The most effective techniques for cryopreservation were as follows. Shoots from in vitro seedlings which had been cultured for about 5-6 weeks were cold-hardened at 4℃ for one week, excised shoot tips were precultured on liquid MS medium including 0.3 M sucrose for 31 hours and 0.7 M sucrose for 17 hours, osmoprotected in loading solution (LS) for 40 min, and then cryoprotected in dehydration solution (PVS3) for 90 min. In addition, we found that regrowth rates of explants on regrowth medium after exposure to liquid nitrogen (LN) were higher than those on MS medium. Results indicated that the highest regrowth percentage was 95.6% for 'Bartlett' cultivar and 68.9% for 'BaeYun No.3' cultivar. Consequently, apical shoot tips of two pear cultivars, 'Bartlett' (P. communis) and 'BaeYun No.3' (P. pyrifolia), were successfully cryopreserved by droplet-vitrification. Results of this study show that the enhanced droplet-vitrification method described in the present study could be used as an effective means for long-term storage of pear genetic resources.

• Journal of Plant Biotechnology
• /
• v.2 no.3
• /
• pp.151-155
• /
• 2000

Shoot proliferation was obtained from shoot tips and nodal explants of Vitex negundo L. on MS medium supplemented with either BAP or KIN (0.1-2.0 mg/L) alone or in combination with NAA (0.1 mg/L). The concentrations of cytokinins combined with NAA produced multiple shoots from shoot tips and nodal explants. The highest mean percentage (84.3$\pm$8.0) of shoot multiplication's were observed on nodal explants in the presence of BAP (1.5 mg/L) and NAA (0.1 mg/L) followed by shoot tips (65.0$\pm$5.0). The regenerated shootlets were rooted on MS basal medium IAA, IBA, NAA (0.1-1.5 mg/L). The maximum number of roots (51.0$\pm$2.6) was achieved on the medium containing IBA (1.0 mg/L) followed by other auxins (NAA, IAA). The regenerated plants were successfully transferred to a mixture of vermiculate and soil. About 95% of the plantlets survived when transferred to the field.

• Journal of KSNVE
• /
• v.10 no.2
• /
• pp.229-239
• /
• 2000

To reduce the drag rise on the advancing helicopter rotor blade tips, the tip of the blade is modified to have sweep, anhedral and pretwist. The equations of motion of rotor blade with these tip angles were derived using Hamilton principle, programmed using FORTRAN and named as ARMDAS(Advanced Rotorcraft Multidisplinary Design and Analysis System). Rotating frequency analysis of rotor blades with swept tipe was performed that is necessary in conceptual and preliminary design phases of the helicopter design. Vibration analysis of non-rotating blades was also accomplished and compared with MSC/NASTRAN resutls for the basis of comparison with the vibration test data. The rotating frequency analysis of blades with an actual rotor blade data was also performed to verify coded program and to check the possibility of a resonance of an actual rotor blade at the specific rotating speed.

• Journal of Welding and Joining
• /
• v.21 no.1
• /
• pp.42-47
• /
• 2003

Stainless rolling stocks are usually fabricated by spot welding process without painting. Indentation on the surface of the car body after spot welding injures the beauty of the stainless rolling stocks. In this study, insulated electrode tips to reduce the indentation are developed and applied to the actual spot welding works. The developed tips are composed of head, neck, hole for cooling water, body and resistance material. They provide large surface contact area with the base materials during spot welding and enhance the current density by necking. Experimental results using the developed tips show that small indentation and sufficient tensile shear strength is produced due to large contact area and enhanced current density.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.501-504
• /
• 2004

This paper describes the fabrication method for atomic force microscopy(AFM) tip with multi-walled carbon nanotube(MWNT). For making a carbon nanotube (CNT) modified tips, AC electric field which cause the dielectrophoresis was used for alignment and deposition of CNTs in this research. By dropping the MWNT solution and applying an electric field between an AFM tip and an electrode, MWNTs which were dispersed into a diluted solution were directly assembled onto the apex of the AFM tips due to the attraction by the dielectrophoretic force. In this case, we investigate the effect of the angle between a tip axis and an electrode. Experimental setup were presented, and then CNT attached AFM tips are successfully shown in this paper.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1997.10a
• /
• pp.79-80
• /
• 1997

1. 서론 : 열유도 상분리법(TIPS)은 일반적으로 상온에서 적정용매가 없는 고분자 소재를 아용하여 고분자-희석제 2성분계의 혼합물을 적절한 냉각 속도로 상분리 온도 이하로 급냉시켜 연속상과 분산상의 상분리를 일으킨 후 matrix전체에 다공성을 부여하여 분리막을 제조하는 공정이다. 폴리올레핀계 고분자를 중심으로 나일론11. 폴리카보네이트, PVC, ABS 수지 등을 소재로 plasmapheresis, 인공심폐기, breathing wear 등의 용도로 많이 응용되어 왔으며 현재 한외여과나 정밀여과 등 수투과 공정 및 battery separator 등으로의 응용이 활발하게 연구되고 있다. TIPS공정에 의해 제조된 고분자 분리막은 기존의 분리막에 비해 내열성 및 내약품성이 우수하며 여러 가지 다양한 변수로 부터 막의 미세구조를 조절할 수 있어 기공의 크기 및 모양이 조절 가능하다. 본 연구에서는 TIPS 공정을 이용한 고분자 분리막의 제조시 take-up speed와 air gap 등을 변화시켜 이에 따른 영향을 조사하였고 또한 cold stretching에 의한 구조변화를 알아보았다.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1996.10a
• /
• pp.75-76
• /
• 1996

다공성 고분자 분리막을 제조하는 방법으로 기존의 용매교환법을 대신하여 내용매성, 내약품성 및 내열성이 매우 뛰어난 고분자를 소재로하여 다공성 고분자막을 만드는 열유도 상분리법(Thermally Induced Phase Separation, TIPS)이 개발되었다. TIPS공정에서는 주로 고분자/희석제 system의 열역학적인 불안정성에 의하여 polymer-rich phase와 polymer-lean phase로 상이 분리되는 liquid-liquid phase separation과 결정성 고분자의 결정화에 의한 solid-liquid phase separation을 주로 상분리 mechanism으로 사용하고 있다. 따라서 위에 언급된 TIPS 이론에 근거한 melt spinning 공정에 의하여 PP 중공사막을 제조하였는데 wet spinning 공정에 의한 용매 교환법에 비해 비교적 공정이 단순하고 다공도를 조건하기가 용이하며 구조 및 성능면에서도 높은 재현성을 가지고 있다. 또한 우수한 소재임에도 불구하고 절절한 용매의 부재로 용매교환법에서 사용할 수 없었던 폴리올레핀계, 나일론계, 방향족출합계 고분자를 사용할 수 있게 되어 소재의 폭이 넓어졌다는데에 가장 큰 장점이 있다. 본 연구에서는 PP중공사막을 제조하기 위하여 먼저 용융 방사장치를 제작하였고 melt spinning 공정에 의해 막을 제조하는데 적합한 방사조건들을 확립한 후 결정된 방사조건에 의해 얻어진 PP 중공사막의 구조 및 성능에 영향을 미치는 인자들에 관하여 조사하였다.