• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.473-473
• /
• 2011

In recent years, organic thin film transistors OTFTs based on conductive-conjugated molecules have received significant attention. We report a fabrication of organic single crystal nanowires that made on Si substrates by liquid bridge-mediated nanotransfer molding (LB-nTM) with polyurethane acrylate (PUA) mold. LB-nTM is based on the direct transfer of various materials from a stamp to a substrate via a liquid bridge between them. In liquid bridge-transfer process, the liquid layer serves as an adhesion layer to provide good conformal contact and form covalent bonding between the organic single crystal nanowire and the Si substrate. Pentacene is the most promising organic semiconductors. However pentacene has insolubility in organic solvents so pentacene OTFTs can be achieved with vacuum evaporation system. However 6, 13-bis (triisopropylsilylethynyl) (TIPS) pentacene has high solubility in organic solvent that reported by Anthony et al. Furthermore, the substituted rings in TIPS-pentacene interrupt the herringbone packing, which leads to cofacial ${\pi}-{\pi}$ stacking. The patterned TIPS-Pentacene single crystal nanowires have been investigated by Atomic force microscopy (AFM), Transmission Electron Microscopy (TEM), X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and electrical properties.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.343-343
• /
• 2008

Newly designed structure of a thin ultrasonic rotary motor was proposed. Thin brass plate was used as a cross shaped vibrator and eight ceramic plates were attached on the upper and bottom sides of the brass plate as in Figure 1. The thin type ultrasonic motor has the structure adherent piezoelectric ceramic on the top and bottom surface of the thin elastic body. The direction of polarization is decided so as to occur the elliptical displacement in regular sequence at touch point A, B, C and D of stator contacted with rotor. By applying two electric fields which have 90 degree phase difference on the ceramics, each contact points make rotational displacements as in figure 2. Finite element analysis program ATILA was used to find the optimal size of the stator. As a result of the simulation, elliptical displacements of the tips were obtained at off-resonance frequencies. The maximum displacements of the contact tips were obtained at the length of 16[mm], width of 6[mm] and thickness of 0.4[mm]. Changes of the resonance frequencies were inversely proportional to the length of ceramic and proportional to the width of ceramic. Elliptical motions of the contact tips. of the stator were consistently obtained at off resonance frequencies. From a prototype motor, speed of 600[rpm] was obtained at 20[Vrms].

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1271-1272
• /
• 2007

Experimental results regarding to the structural properties of carbon nanotubes (CNTs) and the field-emission characteristics of CNT-coated tungsten (W) tips are presented. CNTs are successfully grown on conical-type W-tips by inductively coupled plasma-chemical vapor deposition (ICP-CVD) with or without inserting a TiN-buffer layer prior to the formation of Ni catalysts. For all the CNTs grown, their nanostructures, morphologies, and crystalline structures are analyzed by FESEM, HRTEM, and Raman spectroscopy. Furthermore, the emission properties of CNT-based field-emitters are characterized to estimate the maximum current density and the threshold voltage. The results obtained in this study indicate that the emission current level of the CNT-emitter without using a TiN buffer is desirable for the application of micro-focused x-ray systems.

• Korean Journal of Materials Research
• /
• v.34 no.2
• /
• pp.105-110
• /
• 2024

Scanning probe microscopy (SPM) has become an indispensable tool in efforts to develop the next generation of nanoelectronic devices, given its achievable nanometer spatial resolution and highly versatile ability to measure a variety of properties. Recently a new scanning probe microscope was developed to overcome the tip degradation problem of the classic SPM. The main advantage of this new method, called Reverse tip sample (RTS) SPM, is that a single tip can be replaced by a chip containing hundreds to thousands of tips. Generally for use in RTS SPM, pyramid-shaped diamond tips are made by molding on a silicon substrate. Combining RTS SPM with Scanning spreading resistance microscopy (SSRM) using the diamond tip offers the potential to perform 3D profiling of semiconductor materials. However, damage frequently occurs to the completed tips because of the complex manufacturing process. In this work, we design, fabricate, and evaluate an RTS tip chip prototype to simplify the complex manufacturing process, prevent tip damage, and shorten manufacturing time.

• Korean Journal of Plant Tissue Culture
• /
• v.21 no.3
• /
• pp.161-166
• /
• 1994

Since garlics (Allium sativum L.) are propagated through cloves, infection by virus or other pathogens may become severe problem if not using high quality seed bulbs every year resulting in the reduction of yield and bulb quality, In order to solve this problem, the establishment of virus-free bulb production and its supply system have been required because no chemicals were found to eliminate viruses from seed bulbs. This experiment was conducted to develop an effective production technique of high quality seed bulbs using shoot-tip culture. Over 90% of shoot-tips explanted on January L 1990 were survived at constant temperature of either 20, 24 or 28$^{\circ}C$, wheres 88% at alternate temperature (28/20$^{\circ}C$). The growth of shoot and root was most vigorous at constant 24$^{\circ}C$, and least at alternate temperature (28/20$^{\circ}C$) condition. When shoot-tips were explanted June 21 to August 1,1991, survival and growth of shoot-tips was most vigorous on MS medium supplymented with 0.1 mg/L NAA and 2 mg/L kinetin and least 1 mg/L Gh$_3$. The shoot-tips taken from the seed bulbs stored at 4$^{\circ}C$ for 15 to 60 days were placed on MS medium, shoot growth and in vitro bulblet formation increased slightly as affected by the increase of told treatment period at 4$^{\circ}C$.

• Korean Journal of Food Science and Technology
• /
• v.52 no.3
• /
• pp.290-295
• /
• 2020

In this study, the optimum conditions were established for anthocyanidin extraction from sweet potato tips and tubers. The dependent variables of ethanol concentration (X1), citric acid concentration (X2), and extraction temperature (X3) were designed using a central composite design. All three variables significantly affected anthocyanidin extraction, and the influence of X1 was greater than that of X2 and X3. The highest anthocyanidin content in tips and tubers were 26.58±0.07 and 117.32±0.39 mg/100 g at 50% (X1), 0.3% (X2), and 50℃ (X3), respectively. The optimal extraction conditions for the tips were 56.10% (X1), 0.25% (X2), and 52.24℃ (X3) and tubers were 55.08% (X1), 0.30% (X2), and 53.06℃ (X3). The predicted values under optimal extraction conditions were 27.45 and 119.61 mg/100 g, and the experimental values were 27.09±0.11 and 118.72±0.67 mg/100 g, respectively. The extraction conditions were validated by comparing the predicted and actual values with those of 98.69 and 99.26%, respectively.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.52 no.3
• /
• pp.303-310
• /
• 2007

Sweetpotato shoot tops (leaves, tips and petioles) are known to be very useful parts as vegetables because of their high nutritive values and great biomass yield. In this study, the phenolic compound contents, antibacterial activity, mutagenic activity, and antimutagenic activity were investigated in sweetpotato tips that were 10-15cm of shoot top including stems, petioles and tender leaves after sprout of storage roots. The study was done by extracting sweetpotato tips with 80% ethanol and the ethanol fraction was re-extracted with hexane, chloroform, ethyl acetate, butanol and water. In ethyl acetate and butanol fractions, total phenolic compounds contained 95. 6mg/g extract and 69.3 mg/g extract, respectively, The antibacterial activity was measured using the paper disk method with concentrations of 1, 2, 5 and 10 mg/disk of butanol and ethyl acetate fractions against L. monocytogenes and S. Typhimurium strains. Higher doses of solvent extracts showed the higher antibacterial activities. In addition, 5, 10 and 20 mg/mL of the extracts were tested to determine the antibacterial activity in liquid culture. The sweetpotato leaf extract by ethyl acetate showed 1 log reduction compared to control after 24 hrs on Listeria monocytogenes, but 20 mg/ml of butanol extract completely inhibited the growth of the pathogen after 12 hrs. The extracts from ethyl acetate or butanol on Salmonella Typhimurium did less than 1 log reduction during cultivation compared to control. The numbers of S. Typhimirium TA98 and TA100 revertant colonies were 29-33 and 159-188 CFU/plate, respectively, indicating that solvent extracts were no mutagenic activity. The antimutagenic test was performed by adding direct mutagen 2-NF and MMS, and butanol and ethyl acetate showed antimutagenic effect. Thus, this study showed that sweetpotato tips had high phenolic contents and both antimicrobiol and antimutagenic properties. Sweetpotato tips would be good nutritive source because of their high nutrient content without any toxicity in consuming.

• Proceedings of the KWS Conference
• /
• v.43
• /
• pp.94-96
• /
• 2004

• 대한두경부종양학회:학술대회논문집
• /
• 2009.11a
• /
• pp.187-189
• /
• 2009

• 대한치과보철학회:학술대회논문집
• /
• 2002.11a
• /
• pp.41-41
• /
• 2002