• Archives of Plastic Surgery
• /
• 제41권1호
• /
• pp.19-28
• /
• 2014

Recently, in Korea, the septal extension graft from the septum or rib has become a common method of correcting a small or short nose. The success rate of this method has led to the blind faith that it provides superior tip projection and definition, and to the failure to notice its weaknesses. Even if there is a sufficient amount of cartilage, improper separation or fixation might waste the cartilage, resulting in an inefficient operation. Appropriate resection and effective fixation are essential factors for economical rhinoplasty. The septal extension graft is a remarkable procedure since it can control the nasal tip bidirectionally and three dimensionally. Nevertheless, it has a serious drawback since resection is responsible for septal weakness. Safe resection and firm reconstruction of the framework should be carried out. Operating on the basis of the principle of "safe harvest" and rebuilding the structures is important. Further, it is important to learn several techniques to manage septal weakness, insufficient cartilage quantity, and failure of the rigid frame during the surgery.

• Archives of Plastic Surgery
• /
• 제41권1호
• /
• pp.29-34
• /
• 2014

The septal extension graft is a very useful method of controlling nasal lengthening and tip projection, rotation, and shape by fixing a graft to the septum, which leads to a strong supporting structure. Enhancing graft stability is important for better long-term outcomes and minimizing complications or relapse, and even more efficient application of these methods is needed for East Asians who lack enough cartilage to be harvested in addition to possessing a weak cartilage framework. In this paper, the methods for overcoming the drawbacks of the septal extension graft, such as instability, a fixed tip, and insufficiency of cartilage, are presented, and the applications of each method for greater satisfaction with surgical outcomes are also discussed.

• 한국항공우주학회지
• /
• 제41권10호
• /
• pp.761-769
• /
• 2013

헬리콥터의 후류가 공기력에 미치는 영향은 매우 크다. 하지만 후류의 형상은 매우 복잡하며 예상하기 힘들다. 본 연구에서는 수치적인 방법을 통하여 후류를 자세히 관찰할 것이다. 후류에서의 와류를 자세히 관찰하기 위한 수치적 방법으로는 와류격자법과 자유후류법을 사용하였다. 본 연구에서 제자리 비행에서의 후류 형상을 관찰하였다. 적절한 추력계수를 갖는 제자리 비행에서는 익단 와류 뿐 아니라 블레이드의 안쪽에서 발생하는 counter-rotating vortex도 관찰할 수 있다. 이러한 와류들이 아래로 내려가면서 익단 와류와 counter-rotating vortex가 서로 가까워지며 서로에게 영향을 끼치게 된다. 이에 따라 와류들은 자체적인 불안정성으로 인해 형상이 변한다.

• 대한기계학회논문집B
• /
• 제30권1호
• /
• pp.41-47
• /
• 2006

High resolution dopant profiling in semiconductor devices has been an intense research topic because of its practical importance in semiconductor industry. Although several techniques have already been developed. it still requires very expensive tools to achieve nanometer scale resolution. In this study we demonstrated a novel dopant profiling technique with nanometer resolution using very simple setup. The newly developed technique measures the thermoelectric voltage generated in the contact point of the SPM probe tip and MOSFET surface instead of electrical signals widely adopted in previous techniques like Scanning Capacitance Microscopy. The spatial resolution of our measurement technique is limited by the size of contact size between SPM probe tip and MOSFET surface and is estimated to be about 10 nm in this experiment.

• Geomechanics and Engineering
• /
• 제19권2호
• /
• pp.115-126
• /
• 2019

The long-term settlement characteristics for the cast-in-place bored pile in the deep-thick soft soil are investigated by post-grouting field tests. Six cast-in-place bored engineering piles and three cast-in-place bored test piles are installed to study the long-term settlement characteristics. Three post-grouting methods (i.e., post-tip-grouting, post-side-grouting, and tip and side post-grouting) are designed and carried out by field tests. Results of the local test show that decreased settlements for the post-side-grouted pile, the post-tip-grouted pile and the tip and side post-grouted pile are 22.2%~25.8%, 30.10%~35.98% and 32.40%~35.50%, respectively, compared with non-grouted piles. The side friction resistance for non-grouted piles, post-side-grouted pile, post-tip-grouted pile and the tip and side post-grouted pile undertakes 89.6~91.3%, 94.6%, 92.4%~93.0%, 95.7% of the total loading, respectively. At last, the parameters back analysis method and numerical calculation are adopted to predict the long-term settlement characteristics of the cast-in-place bored pile in the deep-thick soft soil. Determined Bulk modulus (K) and a creep parameter (Ks) are used for the back analysis of the long-term settlement of the post-grouted pile. The settlement difference between the back analysis and the measurement data is about 1.11%-7.41%. Long-term settlement of the post-grouted piles are predicted by the back analysis method, and the predicted results show that the settlement of the post-grouted pile are less than 6 mm and will be stable in 30 days.

• Journal of Welding and Joining
• /
• 제3권1호
• /
• pp.22-31
• /
• 1985

Hot straining embrittlement is one of the most important factors which cause the brittle fracture initiation even in the service temperature in the case of mild steel and high tensile steel. Therefore it is necessary to analyze thoroughly the hot straining embrittlement occurred in weld HAZ of the structural steels. The behaviors of plastic deformation and fracture toughness at the notch tip of the hot strained weld HAZ in structural steels (SB 41 KS, SA 588-Grade A ASTM) have been studied by the recrystallization technique and crack opening displacement (COD) test method. The obtained results are summarized as follows; 1. The plastic zone is formed at the notch tip of weld HAZ owing to nomotonic and cyclic hot stran, and the maximum plastic strain increases with the accumulated hot straining amounts. 2. The distribution of the effective strain at the plastic deformed zone in HAZ can be determined as follows; (.epsilon. over bar $_{p}$ )$_{\chi}$=.epsilon. over bar $_{cr}$ ( $R_{/chi}$/.chi.)$^{m}$ where, .epsilon. over bar $_{cr}$ : (SB 41; .epsilon. over bar $_{cr}$ = 0.2, SA 588; .epsilon. over bar $_{cr}$ = 0.1) 3. The embrittlement of weld HAZ in SB 41 and SA 588 is influenced by hot strain, and the degree of embrittlement becomes deeper with hot straining amounts. 4. The embrittlement of weld HAZ of SB 41 is not influenced by the hot straining amounts until .epsilon. over bar $_{max}$ = 0.36, $R_{\chi}$ = 0.065mm, however the embrittlement of structure in SA 588 is considerably influenced even by a small quantity of the hot straining amounts.s.

• 한국자원식물학회지
• /
• 제10권2호
• /
• pp.114-121
• /
• 1997

범부채(Belamcandi chinensis)의 신초정단을 배양 재료로하여 캘러스, 신초형성 및 뿌리분화에 미치는 식물생장조절물질 및 무기물의 첨가효과를 조사하였다. 캘러스 형성은 1/2 MT배지보다 MT배지에 2, 4-D를 1.0 혹은 2.0mg/l 첨가시킨 구에서 효과적이었으며, 신초형성은 MT 배지나 1/2MT배지에 zeatin을 1.0mg/l 첨가시킨 구에서 효과적이었다. 뿌리의 분화를 위하여 발근배지에 배양하였을 때 1/2MT배지에 NAA를 1.0mg/l 첨가시킨 구에서 양호한 결과(41%)를 보였다.

• 한국토양비료학회지
• /
• 제44권3호
• /
• pp.380-386
• /
• 2011

시설재배 부추의 잎끝마름증상 발생에 영향을 미치는 인자를 구명하기 위하여 포항지역 부추 재배지 토양 132 개소의 토양특성을 분석하였고 통계적 방법으로 관련인자를 조사한 결과, pH는 7.0, 유기물함량 $41g\;kg^{-1}$로 적정 범위에 비해 높은 편이었으며 점토함량이 많은 식질토양인 Alfisols에서 pH, 치환성 양이온, 전기전도도, 질산태 질소함량이 높았고 잎끝마름증 발생비율이 높았으며 pH와 치환성 칼슘함량과 매우 높은 연관성을 나타내었다. pH가 높고 암모니아태 질소함량이 높을수록 암모니아 가스의 생성이 증가하였으며, 질산태질소와 토양유기물은 암모니아 가스 생성에 직접적인 영향은 없으나 토양의 pH 변화에 따라 질산태질소의 암모니아태 질소로 환원 및 유기태질소의 무기화에 따른 암모니아태 질소의 농도변화에 영향을 미치는 것으로 나타났다. 부추의 잎끝마름증은 토양 pH 변화에 따른 무기태질소의 환원에 따른 암모니아 가스생성에 따른 것으로 사료된다.

• 해양환경안전학회지
• /
• 제7권2호
• /
• pp.1-11
• /
• 2001

Many investments and works being continued to preserve green ocean in each countries of the world. Especial1y, the researches on the prevention of marine oil pollution being strengthened. It is not easy to disclose sludge oils that were produced necessarily in the ships operation, so that they are transferred to shore treating facility after collected inside the ship＇s sludge tank mostly. However, this shore transferring method is not only costly and time consuming but also entails risk of oil pollution. In this regard, it will be the best way to manage the sludge oils inside ship itself. The purpose of this study is to device an ultrasonic breaking systems which recycle the sludge oil from ships into usable oil to be burnt. In this paper, the first place, matrix structures of sludge fuel oil(SFO) and sludge lubricating oil(SLO) with the irradiation time for ultrasonic vibrator were interpreted. And, erosion damage for vibrator horn tip which is one of important part of ultrasonic breaking systems was examined under such an environment of the sludge oils. The material for horn tip is being made of SS41 steel and its erosion phase was investigated with variation of the vibration amplitude of 50${\mu}{\textrm}{m}$ and 24${\mu}{\textrm}{m}$ as well as the change of temperature in the oil environments. It is suggested that the experimental results can be helpful to the development of sludge oil disposing systems for the vessel.

• Journal of Korean Neurosurgical Society
• /
• 제41권1호
• /
• pp.11-15
• /
• 2007

Objective : The authors attempted to confirm the risk factors for recurrent chronic subdural hematoma[CSDH] after simple burr-hole drainage. Methods : A total of 302 patients with CSDH who were treated at our hospital between January 1998 and May 2005 were studied. Various parameters considered for analysis of factors associated with CSDH recurrence; demographic and clinical findings [age, sex, history of seizures, diabetes, vascular diseases], initial and perioperative CT findings [hematoma density, location of catheter tip, post operative intracranial air, intracranial hematoma extension, hematoma width, hematoma site]. Results : Twenty-four patients [7.9%] experienced recurrence, whereas 278 patients [92.1%] did not. Five major risk factors should be considered : 1) layered type by hematoma density, 2) type I, II by location of catheter tip, 3) presence of postoperative intracranial air, 4) cranial base type of intracranial hematoma extension, 5) greater hematoma width. Conclusion : In this study, we report that the incidence of postoperative CSDH recurrence can be reduced by the examination of the hematoma characteristics on initial and perioperative CT findings and by preventing subdural air accumulation during operation. In addition, the location of the catheter tip can be used as a helpful factor in reducing the recurrence.