• 펄프종이기술
• /
• 제41권4호
• /
• pp.15-24
• /
• 2009

This paper estimates the nation wide amount of forest biomass arising from management operation for domestic forest based on the simulations that are composed of five scenarios for selecting the target area of thinning. In 2009, the forest biomass arising from thinning is estimated to be 6,642,174 $m^3$. The estimates of forest biomass in 2015 and 2018 are 5,935,140 $m^3$ and 5,682,538 $m^3$, respectively. Since the target forest for thinning policy is estimated to be decreasing, the biomass generated by thinning will decline too. The estimates of forest biomass can be used to induce more effective application of woody biomass rather than one-sided use such as raw materials for solid fuels including pellets and charcoals.

• 한국분무공학회지
• /
• 제15권2호
• /
• pp.83-93
• /
• 2010

Feedwater heaters of many nuclear power plants have recently experienced severe wall thinning damage, which will increase as operating time progresses. Several nuclear power plants in Korea have experienced wall thinning damage in the area around the impingement baffle inside feedwater heater installed downstream of the turbine extraction stream line. At that point, the extract steam from the turbine is two phase fluid at high temperature, high pressure, and high speed. Since it flows to reverse direction after impinging the impingement baffle, the shell wall of feedwater heaters may be affected by flow-accelerated corrosion. In this paper, to compare degree of shell wall thinning mitigation rate to squared type with mitigation rate of other type baffle plate, four different types of impingement baffle plate-squared, curved, mitigating type and multi-hole type-applied inside the shell. With these comparison data, this paper describes operation of experiments and numerical analysis which is composed similar condition with real feed water heater. And flow visualization is operated for verification of experiments and numerical analysis. In conclusion, this study shows that mitigating type and multi-hole type baffle plate are more effective than other baffle plate about prevention of pressure concentration and pressure value decrease.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.822-827
• /
• 2003

Topological maps have drawn more attention recently because they are compact, provide natural interfaces, and are applicable to path planning easily. To build a topological map incrementally, Voronoi diagram was used by many researchers. The Voronoi diagram, however, has difficulty in applying to arbitrarily shaped objects and needs long computation time. In this paper, we present a new method for global topological map from the local topological maps incrementally. The local topological maps are created through a thinning algorithm from a local grid map, which is built based on the sensor information at the current robot position. A thinning method requires simpler computation than the Voronoi diagram. Localization based on the topological map is usually difficult, but additional nodes created by the thinning method can improve localization performance. A series of experiments have been conducted using a two-wheeled mobile robot equipped with a laser scanner. It is shown that the proposed scheme can create satisfactory topological maps.

• 대한기계학회논문집B
• /
• 제31권1호
• /
• pp.1-7
• /
• 2007

Feedwater heaters of many nuclear power plants have recently experienced severe wall thinning damage, which will increase as operating time progresses. Several nuclear power plants in Korea have experienced wall thinning damage in the area around the impingement baffle - installed downstream of the high pressure turbine extraction steam line - inside number 5A and 5B feedwater heaters. At that point, the extracted steam from the high pressure turbine is two phase fluid at high temperature, high pressure, and high speed. Since it flows in reverse direction after impinging the impingement baffle, the shell wall of the number 5 high pressure feedwater heater may be affected by flow-accelerated corrosion. This paper describes the comparisons between the numerical analysis results using the FLUENT code and the down scale experimental data in an effort to determine root causes of the shell wall thinning of the high pressure feedwater heaters. The numerical analysis and experimental data were also confirmed by actual wall thickness measured by an ultrasonic test.

• Journal of Ecology and Environment
• /
• 제34권4호
• /
• pp.347-355
• /
• 2011

Effects of forest thinning on community level properties have not been understood yet in Korea. We investigated regeneration patterns and trajectories after a disturbance by applying a chronosequence approach. Light availability, litter and woody debris cover, and species composition were determined for twenty 50 m line-transect samples representing a disturbance duration gradient (within 11 years). Environmental factors such as light availability and coverage of woody debris and litter changed abruptly after thinning and then returned to the pre-disturbance state. Although species richness was gained at shrub and ground layer in a limited way in both forests, cover of various functional types revealed diversity in their responses. Notably, Alnus firma stands exhibited a larger increment of cover in woody plants. Ordination analysis revealed different regeneration trajectories between natural and planted stands. Based on ordination analysis, rehabilitated stands showed movement to alternative states compared with natural ones, reflecting lower resilience to perturbation (i.e., lower stability). Our results suggest that community resilience to artificial thinning depends on properties of the dominant species. But to get more explanatory ecological information, longer-term static observations are required.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.281-286
• /
• 2008

Wall thinning defect due to flow accelerated corrosion is one of major aging phenomena in most power plant industries, and it results in reducing load carrying capacity of the piping systems. A failure testing system was set up for real scale elbows containing various simulated wall thinning defects, and monotonic in-plane bending tests were performed under internal pressure to find out the failure behavior of thinned elbows. Various finite element models were generated and analysed to figure out and simulate the behavior for other thinning shapes and loading conditions. This paper presents the decreasing trends of load carrying capacity according to the thinning dimensions which were revealed from the investigation of finite element analysis results. A mechanical integrity evaluation model for thinned elbows was proposed, also. This model can be used to calculate the TES plastic load of thinned elbows for general internal pressure, thinning location, and in-plane bending direction.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 추계학술대회
• /
• pp.719-721
• /
• 2013

지문인식센서로부터 획득한 이미지를 처리하기 위한 알고리즘에서 세선화 단계가 차지하는 비율이 전체 마이크로프로세서 동작 사이클의 39%에 이른다. 세선화 단계는 가보필터와 달리 초월함수 등 복잡한 함수를 사용하는 동작이 아니므로 하드웨어로 구현하는 것이 전체 시스템의 소형화와 저전력에 도움이 된다. 본 논문에서는 반복작인 단순동작을 수행하는 세선화를 위한 $64{\times}64$ 픽셀이미지 처리기를 RTL 수준에서 설계하고 FPGA 환경에서 논리합성을 통하여 그 동작을 검증하고자 한다. 이를 통하여 향후 저성능 마이크로콘트롤러와 세선화 프로세서 내장형 지문인식 SoC 의 가능성을 보여준다.

• Nuclear Engineering and Technology
• /
• 제40권7호
• /
• pp.607-614
• /
• 2008

Since pipes with wall-thinning defects can collapse at fluid pressure that are lower than expected, the collapse moment of wall-thinned pipes should be determined accurately for the safety of nuclear power plants. Wall-thinning defects, which are mostly found in pipe bends and elbows, are mainly caused by flow-accelerated corrosion. This lowers the failure pressure, load-carrying capacity, deformation ability, and fatigue resistance of pipe bends and elbows. This paper offers a support vector regression (SVR) model further enhanced with a fuzzy algorithm for calculation of the collapse moment and for evaluating the integrity of wall-thinned piping systems. The fuzzy support vector regression (FSVR) model is applied to numerical data obtained from finite element analyses of piping systems with wall-thinning defects. In this paper, three FSVR models are developed, respectively, for three data sets divided into extrados, intrados, and crown defects corresponding to three different defect locations. It is known that FSVR models are sufficiently accurate for an integrity evaluation of piping systems from laser or ultrasonic measurements of wall-thinning defects.

• Journal of Ecology and Environment
• /
• 제30권3호
• /
• pp.251-255
• /
• 2007

Self-thinning was measured in Salix communities on Bam Island in Seoul at various age stages. $D^2H$ was used to estimate tree biomass, where D is stem diameter at breast height or 10 cm height for plants with height <1.5 m, and H is height. A log-log plot of density versus $D^2H$ and correlation analysis indicated a significant relationship between density and biomass with equation 'log $D^2H$ = -1.27 log N + 7.06'. This indicates that self-thinning affects biomass in the Salix community with -1.27 as the thinning coefficient. If we assume a thinning exponent -3/2, then the allometric coefficient of the equation, log w = a log $D^2H$ + b, is 1.18. This is much higher than that for any other species studied in Korea. There were statistically significant relationships between age and density and between age and basal area and these relationships suggest guidelines for transplantation of willows and for the assessment of Salix community restoration projects in riverine wetlands based on standard density, basal area, and age. The results of this study may also increase understanding of succession processes in Salix community restoration in riverine wetlands.

• 정보처리학회논문지B
• /
• 제8B권6호
• /
• pp.651-656
• /
• 2001

본 논문은 기존의 신경망을 이용한 세선화 방법 중에서 자기 구성 그래프(Self-Organized Graph：SOG) 세선화 기법의 우수한 세선화 결과를 유지하면서, 수행 속도를 향상시키기 위하여 Kohonen Features Map의 새로운 점증 기법을 변형된 SOG에 적용한 개선된 SOG(Improved SOG：$SOG^*$) 세선화 기법을 제안한다. 실험 결과로써 숫자와 문자 모두 기존의 SOG와 같은 우수한 세선화 결과를 나타내며, O((logM)3)의 시간 복잡도를 가지는 속도 향상을 이루었다. 따라서 본 논문에서 제안한 방법은 숫자 또는 문자 인식에 있어 특징 추출의 빠른 전처리 과정으로 사용할 수 있다.