• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 추계학술대회
• /
• pp.698-701
• /
• 2013

비대칭 이중게이트(double gate; DG) MOSFET의 문턱전압이하 스윙의 게이트 산화막 두께에 대한 변화를 고찰하였으며 이를 위하여 포아송방정식의 해석학적 전위분포를 구하였다. 비대칭 DGMOSFET 소자는 대칭적 구조를 갖는 DGMOSFET와 달리 4단자 소자로서 상단과 하단의 게이트 산화막 두께 및 인가전압을 달리 설정할 수 있다. 포아송방정식을 풀 때 전하분포함수에 가우시안 함수를 적용함으로써 보다 실험값에 가깝게 해석하였다. 비대칭 DGMOSFET의 문턱전압 이하 스윙을 상 하단 게이트 산화막 두께 변화에 따라 관찰한 결과, 게이트 산화막 두께에 따라 문턱전압이하 스윙은 크게 변화하는 것을 알 수 있었다. 특히 상 하단 게이트 산화막 두께가 증가할 때 문턱전압이하 스윙 값도 증가하였으며 상단 게이트 산화막 두께의 변화가 문턱전압이하 스윙 값에 더욱 큰 영향을 미치고 있다는 것을 알 수 있었다.

• Imaging Science in Dentistry
• /
• 제48권1호
• /
• pp.51-57
• /
• 2018

Purpose: To perform a comparative analysis of the palatal bone thickness in Thai patients exhibiting class I malocclusion according to whether they exhibited a normal or open vertical skeletal configuration using cone-beam computed tomography (CBCT). Materials and Methods: Thirty CBCT images of Thai orthodontic patients (15-30 years of age) exhibiting class I malocclusion with a normal or open vertical skeletal configuration were selected. Palatal bone thickness was measured in a 3.0-mm grid pattern on both the right and left sides. The palatal bone thickness of the normal-bite and open-bite groups was compared using the independent t-test. The level of significance was established at P<.05. Results: The palatal bone thickness in the normal-bite group ranged from $2.2{\pm}1.0mm$ to $12.6{\pm}4.1mm$. The palatal bone thickness in the open-bite group ranged from $1.9{\pm}1.1mm$ to $13.2{\pm}2.3mm$. The palatal bone thickness was lower at almost all sites in patients with open bite than in those with normal bite. Significant differences were found at almost all anteroposterior sites along the 3 most medial sections (3.0, 6.0, and 9.0 mm lateral to the midsagittal plane)(P<.05). Conclusion: Class I malocclusion with open vertical skeletal configuration may affect palatal bone thickness, so the placement of temporary anchorage devices or miniscrew implants in the palatal area in such patients should be performed with caution.

• Physical Therapy Rehabilitation Science
• /
• 제2권1호
• /
• pp.44-48
• /
• 2013

Objective: The purpose of this study was to investigate changes of abdominal muscles thickness according to the angle during the active straight leg raise (ASLR) in young healthy subjects. Design: Cross sectional study. Methods: Twenty-three healthy university students (13 men and 10 women) voluntary participated to the study in S University. The ASLR was performed with the subject lying supine with lower extremities straight on a standard plinth, hands resting on the chest, and elbows on the plinth. When one subject performed ASLR from each angles ($30^{\circ}$, $45^{\circ}$, $60^{\circ}$, $90^{\circ}$), compared changes in the thickness of rectus abdominis muscle. Changes in muscle thickness during ASLR test were assessed with ultrasonography. All subjects were to provide enough time of rest after performed ASLR. Rectus abdominis thickness were measured using rehabilitative ultrasound image. Results: Good quality rectus abdominal muscle activation data were recorded during ASLR. The length changes of linea alba showed significantly shorter in between $0^{\circ}$ and $30^{\circ}$ (p<0.05). The thickness of rectus abdominis muscle were significantly different between $0^{\circ}$ and $30^{\circ}$, $0^{\circ}$ and $45^{\circ}$, $0^{\circ}$ and $60^{\circ}$, $0^{\circ}$ and $90^{\circ}$. According to increase of pelvic angle, the thickness of rectus abdominis muscle were more thickening (p<0.05). Conclusions: This result is changes of abdominal muscles thickness according to the angle during the ASLR.

• 한국산학기술학회논문지
• /
• 제16권6호
• /
• pp.3667-3671
• /
• 2015

PCB(Printed circuit board) 장착을 주목적으로 하는 포밍공정에서 주름을 발생시키지 않으면서, 실험을 통하여 재료의 두께 변화를 고찰하였다. 실험결과 제 1공정의 포밍 높이는 제 2공정에서의 재료두께 변화에 크게 영향을 미치는 것으로 나타났으며, 제 1공정에서 다이의 입구 모서리는 제품높이 50%정도의 라운드를 가져야 하며, 포밍의 높이는 원래의 제품보다 재료의 두께만큼 높게 하여야 한다. 또한 제 1공정에서 포밍형상을 구현하면 재료의 두께가 85%로 얇아지고 제 2공정에서 리스트라이킹시 재료의 두께가 80%로 얇아진다. 그러므로 정확한 형상을 구현하기 위해서는 재료가 얇아지는 것을 고려하여 다이는 원제품의 형상을 유지하고 펀치는 원제품의 깊이에 재료 두께의 20%이상 더한 값만큼 길이를 길게 하여야 압축의 효과를 얻을 수 있다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.147-148
• /
• 2007

Dye-sensitized solar cell using conversion of solar energy to electrical energy appeared that which solves a environmental matter. The dye-sensitized solar cell uses nano-crystalline oxide semiconductor for absorbing dye. The $TiO_2$ is used most plentifully. The efficiency of the dye-sensitized solar cell changes consequently in the particle size, morphology, crystallization and surface state of the $TiO_2$. In this paper, we report The effect of titania$(TiO_2)$ thickness on the performance of dye-sensitized solar cells. Using doctor blade method, It produced the thickness of the $TiO_2$ with $7\;{\mu}m,\;10\;{\mu}m,\;13\;{\mu}m$. The efficiency was the best from $10{\mu}m$. It had relatively low efficiency on the thickness from $7\;{\mu}m\;to\;13\;{\mu}m$. The reason why it presents low efficiency on $7\;{\mu}m$ thickness is that excited electrons can not be delivered enough due to thin thickness of $7\;{\mu}m\;TiO_2$. And The reason why it presents low efficiency on $13\;{\mu}m$ thickness is that thick $13\;{\mu}m\;TiO_2$ can not penetrate the sunlight enough.

• 한국도로학회논문집
• /
• 제11권4호
• /
• pp.107-115
• /
• 2009

본 연구는 포스트텐션 콘크리트 포장(PTCP: Post-Tensioned Concrete Pavement)의 슬래브 두께가 긴장 설계에 미치는 영향을 분석하여 PTCP에서 최적의 슬래브 두께를 선정하기 위하여 수행되었다. 먼저 슬래브 두께에 따른 차륜과 환경하중에 의한 인장응력을 유한요소해석 모델을 이용하여 구하였으며 허용 휨강도를 선정하여 긴장 응력을 산출하였다. 슬래브의 컬링을 야기하는 환경하중은 두께에 따라 동일한 온도구배 및 동일한 상하부 온도차의 두 가지 가정을 모두 고려하였다. 그리고 프리스트레싱을 위한 강선 긴장 시 긴장량의 손실을 고려하여 슬래브 두께 별로 긴장 설계를 수행하였다. 이러한 설계 결과를 비교 분석해 보면 일반적으로 슬래브 두께가 증가하면 강선의 개수도 따라서 증가되기 때문에 콘크리트와 강재 비용 모두가 증가하게 되어 비경제적인 설계가 된다. 환경하중의 영향이 미약하여 두께가 증가할 때 강선의 개수가 줄어드는 경우에도 두께 증가에 의한 비용이 강재 절감에 따른 비용보다 더 커지므로 두께가 증가할수록 경제적이지 못하다. 따라서 일반적으로 PTCP에서 슬래브 두께는 시공이 가능한 정도에서 최소로 유지하는 것이 타당하다고 할 수 있다.

• The Journal of Korean Physical Therapy
• /
• 제28권6호
• /
• pp.349-354
• /
• 2016

Purpose: The purpose of the study was to investigate the thickness of deep neck flexors (DNF) and sternocleidomastoid muscle (SCM) bilaterally during deep neck flexor endurance test using ultrasonography images. Methods: Healthy volunteers (n=22), 20-25 (mean 22.2) years old, were recruited for the study. Participants were asked to perform the craniocervical flexion test (CCFT) in a seated position to measure deep neck flexor endurance. The thickness of DNF and SCM was assessed bilaterally and was measured using ultrasonography images at resting, contracted, pre-terminal and terminal phases of the neck muscle endurance test. Muscle contraction pattern was also observed along with the changes in muscle thickness from the resting phase to the terminal phase. Repeated-measure ANOVA was employed to compare muscle thickness bilaterally at each phase. Results: The thickness of right and left muscles was found to be significantly different in DNF both at resting and contracted phases (p=0.02, p<0.01, respectively), whereas no significant difference was observed in SCM at resting or contracted phases (p=0.59, p=0.18, respectively). Thickness changes from resting to contracted phase were not significantly different both in DNF and SCM (p=0.18, p=0.22, respectively). Muscle contraction patterns in right and left muscles were shown to be similar. Conclusion: The current study, performed on (with) healthy subjects, significantly detected different right and left muscle thickness in DNF, but the muscle contraction patterns were similar in DNF and SCM bilaterally. Further study is required to investigate DNF and SCM muscle size and function in people with neck pain.

• 비파괴검사학회지
• /
• 제34권2호
• /
• pp.171-175
• /
• 2014

본 연구에서는 박막 표면을 따라 전파하는 표면파의 속도 분산성을 이용하여 박막의 두께를 비파괴적으로 측정할 수 있는 기법을 제안하였다. 표면파의 분산성을 이용하여 박막의 두께를 측정하기 위하여 전자빔증착법(E-beam evaporation)을 이용하여 Si(100) 웨이퍼 위에 니켈의 증착시간을 제어함으로서 두께가 다른 니켈 박막시험편을 제작하였다. 제작된 시험편의 실제 증착된 박막의 두께를 확인하기 위하여 SEM(scanning electron microscope)을 이용하여 박막의 단면사진을 촬영하여 두께를 확인하였다. 그 후에 두께가 다른 시험편에서의 표면파의 속도를 초음파현미경(scanning acoustic microscope)의 V(z) 곡선법을 이용하여 표면파의 속도를 측정하고 실제 측정된 두께와 표면파 속도와의 상관성을 확인하였다. 박막의 두께가 증가함에 따라 표면파의 속도는 감소하는 경향성을 나타내었다. 결론적으로 본 연구에서 제안한 표면파의 속도 분산성을 이용하여 나노 스케일 니켈 박막의 두께를 측정하는 기법이 가능성이 있음을 확인하였다.

• 한국전문물리치료학회지
• /
• 제26권1호
• /
• pp.28-36
• /
• 2019

Background: Temporomandibular disorder (TMD) is characterized by pain and limited range of motion in the jaw. TMD patients generally prefer to chew on the unaffected or less-affected side, and this tendency often results in asymmetries in masseter muscle thickness and range of mandibular motion. Objects: The purpose of this study was to compare the asymmetries in masseter muscle thickness and range of mandibular motion in subjects with and without temporomandibular disorders. Methods: Thirty-nine subjects were divided into two groups: A TMD group ($n_1=19$) and a control group ($n_2=20$). The jaw opening range and laterotrusion were measured using a digital vernier caliper. The masseter muscle thickness was examined in both the resting state and the maximal clenching state using ultrasonography. The absolute asymmetry indices calculated based on the laterotrusion and masseter muscle thickness of the respective right and left sides. A two-way ANOVA and a Mann-Whitney U test were used for statistical analysis. Results: No significant different was found in the masseter muscle thickness between the TMD and control group. A significant difference was found in the absolute asymmetry indices of mandibular laterotrusion between the TMD and control groups (p<.05). Furthermore, the ranges of jaw opening were significantly different between males and females (p<.05). The absolute asymmetry index values of masseter muscle thickness at rest and during maximal clenching were also significantly different between males and females (p<.05). Conclusion: These results demonstrated that the subjects with TMD had a larger degree of asymmetry in laterotrusion than those without TMD. Therefore, a physiotherapy program needs to be designed to restore normal laterotrusion capacities for TMD subjects. These results also showed that female subjects had greater absolute asymmetry indices in masseter muscle thickness than male subjects. Therefore, more training is needed to promote bilaterally balanced chewing among women.

• 한국의류산업학회지
• /
• 제21권1호
• /
• pp.88-95
• /
• 2019

The purpose of this study was to figure out the various characteristics of the thickness sensation among elements of tactile sensation using psychophysical method. Firstly, panel screening was processed to select sensitive thickness panel using the triangle test. As a result of discriminating the paper thickness difference from 1 to 4 pieces, the female students perceived the thickness difference more sensitively than the male students (p<.05). Secondly, JND (Just Noticeable Difference) was obtained at percentage of stimulus detection rate in order to detect the degree of thickness difference by psychophysical method. It was found that the difference threshold of the entire group was about 0.125mm, with male group being about 0.178mm and female group being about 0.095mm. Thirdly, Weber's law was used to find the minimum discrimination difference between the stimuli. The experiments were conducted by increasing the paper's base thickness from 1.950mm to 1.330mm, and it was found that the difference tendency increased when the size of the basic stimulus increased. At this time, the minimum discrimination difference increased, but the Weber' fraction was not proportional to the magnitude of the stimulus. The significance of this study was that sensory evaluation was applied to research in the fields of clothing science and it seems effective to further screen and train sensitive students as material discrimination experts.