• Journal of Practical Agriculture & Fisheries Research
• /
• v.25 no.1
• /
• pp.20-35
• /
• 2023

Chemical preservatives have a good effect on antibacterial activity, but many side effects on the human body have been reported. Recently, the development of natural preservatives that are harmless to the human body and have preservative functions and self-efficacy is active. In addition, in order to increase the absorption rate of natural products by the human body, the method of fermentation using strains is also increasing. Therefore, this study selected varieties that are harmless to the human body and have good antibacterial activity. 1. The yield of origin, thickness and solvent was investigated. Scutellaria baicalensis Georgi was made in China and received a yield of 21.88% from 50% ethyl alcohol extract. Salvia miltiorrhiza Bunge was made in Korea and received a yield of 25.62% from 50% ethyl alcohol extract. Dryopteris crassirhizoma Nakai was made in China and received a yield of 6.50% from 70% ethyl alcohol extract. 2. The solid fermentation with the S. baicalensis and S. miltiorrhiza with B. Subtilis yield gained 24.40%, 39.30%, and D. crassirhizoma obtained 11.10% yield when fermented with L. casei. 3. After the liquid fermentation, a clear zone of 9mm was identified for the S. aureus strain in the S. baicalensis, and the antibacterial activity was not confirmed in S. miltiorrhiza and D. crassirhizoma. 4. When the S. baicalensis was fermented with L. Casei, it showed high antibacterial activity in C. albicans and S. aureus. S. miltiorrhiza showed antibacterial activity in S. aureus when it was solid with S. cerevisiae. When the spectators were solid with L. casei and S. cerevisiae, antibacterial activity was high in E. coli and S. aureus. Overall, the antibacterial activity after fermentation was much higher than when fermented. 5. The change in active ingredients was baicalin 101.57, baicalein 28.26, and wogonin 5.33mg/g in the S. baicalensis that did not ferment solid. When solid fermentation with S. cerevisiae, the content of baicalinin with baicalin 94.31, baicalein 30.41, and wogonin 3.57mg/g was found to have increased. S. miltiorrhiza that was not fermented, salvianolic acid A was 1.82mg/g, and when fermented with S. cerevisiae, it increased to 5.70mg/g. The active ingredients of the spectators were flavaspidic acid AP, flavaspidic acid PB, flavaspidic acid AB, and flavaspidic acid BB.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.6
• /
• pp.71-82
• /
• 2006

One of the most popular pre-reinforcement methods of tunnel heading in cohesionless soils would be the fore-polling of grouted pipes, known as RPUM (reinforced protective umbrella method) or UAM (umbrella arch method). This technique allows safe excavation even in poor ground conditions by creating longitudinal arch parallel to the tunnel axis as the tunnel advances. Some previous studies on the reinforcing effects have been performed using numerical methods and/or laboratory-based small scale model tests. The complexity of boundary conditions imposes difficulties in representing the tunnelling procedure in laboratory tests and theoretical approaches. Full-scale study to identify reinforcing effects of the tunnel heading has rarely been carried out so far. In this study, a large scale model testing for a tunnel in granular soils was performed. Reinforcing patterns considered are four cases, Non-Reinforced, Crown-Reinforced, Crown & Face-Reinforced, and Face-Reinforced. The behavior of ground and pipes as reinforcing member were fully measured as the surcharge pressure applied. The influences of reinforcing pattern, pipe length, and face reinforcement were investigated in terms of stress and displacement. It is revealed that only the Face-Reinforced has decreased sufficiently both vertical settlement in tunnel heading and horizontal displacement on the face. Vertical stresses along the tunnel axis were concentrated in tunnel heading from the test results, so the heading should be reinforced before tunnel advancing. Most of maximum axial forces and bending moments for Crown-reinforced were measured at 0.75D from the face. Also it should be recommended that the minimum length of the pipe is more than l.0D for crown reinforcement.

• Journal of the Korean Geotechnical Society
• /
• v.39 no.5
• /
• pp.51-63
• /
• 2023

Numerical analysis was conducted to determine the effect of soil behavior by thawing and freezing of seasonal frozen soil on pile foundations. The analysis was performed using the finite element method (FEM) to simulate soil-pile interaction based on the atmosphere temperature change. Thermomechanical coupled modeling using FEM was applied with the temperature-dependent nonlinear properties of the frozen soil. The analysis model cases were applied to the MCR and HDP models to simulate the elastoplastic behavior of soil. The numerical analysis results were analyzed and compared with various conditions having different length and width sizes of the pile. The results of the numerical analysis showed t hat t he HDP model was relat ively passive, and t he aspect and magnit ude of t he bearing capacit y and displacement of the pile head were similar depending on the length and width of the pile conditions. The vertical displacement of the pile head by thawing and freezing of the ground showed a large variation in displacement for shorter length conditions. In the MCR model, the vertical displacement appeared in the maximum thaw settlement and frost heaving of 0.0387 and 0.0277 m, respectively. In the HDP model, the vertical displacement appeared in the maximum thaw settlement and frost heaving of 0.0367 and 0.0264 m, respectively. The results of the pile bearing capacity for the two elastoplastic models showed a larger difference in the width condition than the length condition of the pile, with a maximum of about 14.7% for the width L condition, a maximum of about 5.4% for M condition, and a maximum of about 5.3% for S condition. The significance of the effect on the displacement of the pile head and the bearing capacity depended on the pile-soil contact area, and the difference depended on the presence or absence of an active layer in the soil and its thickness.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.38 no.1
• /
• pp.18-25
• /
• 2022

Purpose: This study aimed to evaluate the color stability and antibacterial properties of the surface of polyethyl methacrylate (PEMA) resin with zirconia nanoparticles added. Materials and Methods: The control group was pure PEMA resin, and the experiment group was PEMA resin 15 mm in diameter and 2.5 mm in thickness disk-shaped specimens with 2, 4 and 8 w/v% of zirconia nanoparticles added, which were respectively divided into Group Z2, Group Z4, and Group Z8. After analyzing the surface roughness and color stability of the specimens, their antibacterial properties were evaluated using Porphyromonas gingivalis (P. gingivalis). The Statistical analysis was performed using when normality was met in the Shapiro-Wilk test, one-way ANOVA was used to test parameters, and Tukey's test was used as a post hoc test. When normality was not met, the Kruskal-Wallis test, a non-parametric test was used (P < 0.05). Results: The surface roughness measurement found that there was no significant difference between the experimental and control groups. The color stability evaluation showed that the Z2, Z4, and Z8 groups were within the color range of natural teeth. The adhesion of P. gingivalis was evaluated to be significantly reduced in Group Z2 compared to the control group (P < 0.05). In the Z2 group, Z4 group, and Z8 group, dead cells bacteria than the control group were observed. Conclusion: In conclusion, PEMA resin with zirconia nanoparticles added was within the range of natural teeth in color and reduced the adhesion of P. gingivalis.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.4
• /
• pp.6-22
• /
• 2022

In this paper classifies the types of 228 anchor stones discharged from the west and south coasts, assumes a combined method by type, routes through discharge locations, and It attempted to estimate the burial site. Prior to classification of types, the weight, thickness, width, and length of the anchor stone were measured, and the largest Young in the tomb The scent weight was classified into I~V groups, and the shape of the anchor stone was classified into 1-6 types. All of these weight and shape correlations It was classified into 17 types. The combined method by type is 180kg or less depending on the morphological characteristics of the reference value of the extracted anchor stone, and the type An anchor of type 1 or 2 is used in combination with an anchor, and a anchor of type 3 or 6 weighs more than 180kg and is combined with an anchor The dragon was assumed to be an anchor. Along with this, the route and burial site are identified through past records and testimony of local residents It was checked against the data. The route was largely consistent with past records, but the new route was apparent in waters near the island or inland It was also drawn. In the case of burial sites, small and large in Taean Mado Sea and Jindo Byeokpajin Sea, where anchor stones are concentrated, Considering the pattern of the type anchor stones being discharged, it was consistent with the testimony that ships of various sizes were mysterious in the two seas. Based on this type classification, a study on the spatiality of the anchors was conducted. First, a comparison and analysis was done on whether actual real data, such as anchor stones, old ships, and relics, were identified on the Joun-ro route and international trade routes as recorded in the past literature. Where there was no record, the route was estimated based on real data. To this end, routes estimated based on the testimony of local residents and modern ship workers were analyzed as to whether ships traveled there in the past and whether they could actually sail. Next, the location of each seedling was estimated by ship size according to the weight of the anchor stone. In the case of the Taean Mado Sea and Jindo Byeokpajin Sea, both small and large anchor stones were discharged from the coastline and were far away.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.4
• /
• pp.138-164
• /
• 2022

The Neolithic shell midden in Daejuk-ri, Seosan, is distributed on the gentle slope of a low hill close to the west coast. The bedrock of the area consists mainly of schist with various mafic minerals, but shows a partial gneiss pattern. The site consists of loamy topsoil and clay loam subsoil, and the degree of siallization is relatively low. Although the pottery excavated from the shell midden shares mostly similar features, a variety of shapes and patterns coexist. The surface colors, thickness and physical properties are slightly different. The pottery can be subdivided into three types (IA, IB and II) according to the composition of the body clay, the temper and the existence of a black core. Types IA and IB are colorless mineral pottery with a non-black or black core respectively. TypeII is colored mineral pottery with a non-black core. Type I pottery also contains non-plastic colored minerals, but type II contains a large amount of biotite, chlorite, talc, amphibole, diopside and tremolite, which include a large amount of Mg and Fe. The studied pottery contains a small amount of organic matter. Considering the grain size and relatively poor sorting and roundness of the non-plastic particles, the pottery appears to be made by adding coarse non-plastic tempers for special purposes to the untreated weathered soil around the site. The three types of pottery seem to have been incompletely fired in general. While type IB has the lowest degree of oxidation, typeII shows the highest degree of redness and oxidation. It can be interpreted that these differences depend on the firing temperature and the ratio of non-plastic particles. Through a synthesis of the minerals, geochemical data and thermal history, it can be determined that the firing temperature ranged from 600 to 700℃. The pottery types of the Daejuk-ri Shell Midden have slightly different production conditions, mineral compositions, and physical properties, but have undergone similar production processes with basically the same clay materials. The clay is almost identical to the composition of the bedrock and weathered soil distributed in the Daejuk-ri area. Currently, there is an industrial complex in the area, so it is difficult to confirm the soil and geological distribution of the site. However, it is highly probable that the area around the site was self-sufficient for the clay and tempers required for the production of the Neolithic pottery. Therefore, it can be interpreted that the group that left the shell midden in Daejuk-ri lived near the site, visited the site for the purpose of collecting and processing shellfish, and discarded the broken pottery along with shells.

• The Korean Journal of Zoology
• /
• v.18 no.2
• /
• pp.51-60
• /
• 1975

The present study was performed histologically and histochemically to observe the cutaneous mucous glands in the frog, Rana nigromaculata during metamorphosis. The cutaneous thssues including dermal plicae in the dorsal portions of the frog tadpoles at each metamorphosis stage were fixed in 10% buffered formalin at$4^{\circ}C$, embedded in paraffin wax, sectioned 4 $\mu$m thickness and stained with periodic acid-Schiff(PAS) and alcian blue (AB) at both pH 2.5 and pH 1.0. The results of observation were as follows: 1. The developments of cutaneous mucous glands of the frog tadpole were begun with appearance of gland cell nest in the dermis at metamorphosis XV stage and significant numerical increases could be seen at metamorphosis XX, XXIII and XXIV stages. 2. This cutaneous mucous gland of the frog tadpole could be divided into two types; A-type glands showed strong positivities to both PAS and AB at pH 2.5 in the gland body cells and to PAS in the gland neck cells, and B-type glands at AB pH 2.5 in the gland body cells. 3. In the A-type mucous glands, the reactivities of the glandular epithelial cells to both PAS and AB stain could be first seen at the metamorphosis XIX stage of frog tadpole. The reactivities of the glandular epithelial cells to both PAS and AB pH 2.5 were gradually increased according to the process of metamorphosis after XX stage of metamorphosis. 4. The B-type mucous glands were first seen at the XX stage and the reactivity of the glandular epithelial cells to AB at pH 2.5 was gradually increased according to the process of metamorphosis after XX stage. 5. The A-type and the B-type mucous glands were in the ratio of 99 : 1, 7 : 3 and 5.5 : 4.5 for each of metamorphosis XX, XXI-XXII and XXIII-XXV stages. 6. The remarkable development of the cutaneous mucous glands of the frog tadpoles might be needed to maintain water and electrolyte balances according to the change of way from aquatic life to amphibious.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4C
• /
• pp.247-254
• /
• 2006

Online testing method is one of the numerical experiment methods using experimental information for a numerical analysis directly. The method has an advantage in that analysis can be conducted without using an idealized mechanical model, because mechanical properties are updated from element test for a numerical analysis in real time. The online testing method has mainly been used for the geotechnical seismic engineering, whose major target is sand. A testing method that may be applied to a consolidation problem has recently been developed and laboratory and field verifications have been tried. Although related research thus far has mainly used a method to update average reaction for a numerical analysis by positioning an element tests at the center of a consolidation layer, a weakness that accuracy of the analysis can be impaired as the thickness of the consolidation layer becomes more thicker has been pointed out regarding the method. To clarify the effectiveness and possible analysis scope of the online testing method in relation to the consolidation problem, we need to review the results by applying experiment conditions that may completely exclude such a factor. This research reviewed the results of the online consolidation test in terms of reproduction of the consolidation settlement and the dissipation of excess pore water pressure of a clay specimen by comparing the results of an online consolidation test and a separated-type consolidation test carried out under the same conditions. As a result, the online consolidation test reproduced the change of compressibility according effective stress of clay without a huge contradiction. In terms of the dissipation rate of excess pore water pressure, however, the online consolidation test was a little faster. In conclusion, experiment procedure needs to improve in a direction that hydraulic conductivity can be updated in real time so as to more precisely predict the dissipation of excess pore water pressure. Further research or improvement should be carried out with regard to the consolidation settlement after the end of the dissipation of excess pore water pressure.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.4
• /
• pp.363-371
• /
• 2023

To construct a ship, blocks of various sizes must be moved and erected . In this process, lugs are used such that they match the block fastening method and various functions suitable for the characteristics of each shipyard facility. The sizes and shapes of the lugs vary depending on the weight and shape of the block structures. The structure is reinforced by welding the doubling pads to compensate for insufficient rigidity around the holes where the shackle is fastened. As for the method of designing lugs according to lifting loading conditions, a simple calculation based on the beam theory and structural analysis using numerical modeling are performed. In the case of the analytical method, a standardized evaluation method must be established because results may differ depending on the type of element and modeling method. The application of this ambiguous methodology may cause serious safety problems during the process of moving and turning-over blocks. In this study , the effects of various parameters are compared and analyzed through numerical structural analysis to determine the modeling conditions and evaluation method that can evaluate the actual structural response of the lug. The modeling technique that represents the plate part and weld bead around the lug hole provides the most realistic behavior results. The modeling results with the same conditions as those of the actual lug where only the weld bead is connected to the main body of the lug, showed a lower ulimated strength compared with the results obtained by applying the MPC load. The two-dimensional shell element is applied to reduce the modeling and analysis time, and a safety working load was verified to be predicted by reducing the thickness of the doubling pad by 85%. The results of the effects of various parameters reviewed in the study are expected to be used as good reference data for the lug design and safe working load prediction.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.18 no.1
• /
• pp.13-24
• /
• 2016

Sixty Hanwoo steers(15 months of age; 409±29.2 kg of BW) were used to evaluate the effects of dietary vitamins A and D restriction on carcass characteristics. Steers were allotted randomly to 1 of 4 treatments: Control(diet supplemented with vitamins A, D and E), -A (diet supplemented with vitamins D and E), -D(diet supplemented with vitamins A and E) and -AD(diet supplemented with vitamin E only). Steers were fed the experimental diet for a period of 8 months(until 23 months of age), and then supplemented with vitamins A and D at 0.05% of the diet(as fed-basis) from 24 to 26 months of age, and at 0.1% of the diet from 27 to 31 months of age(harvesting time). Dietary restriction of vitamins A and D did not affect DM intake, daily gain and feed conversion ratio. But the concentration of serum retinol was significantly(P<0.05) decreased by vitamin A restriction with the lowest concentration being seen at 23 months of age(345.0 ㎍/L and 326.7㎍/L for control and -D treatment versus 169.3 ㎍/L and 175.4 ㎍/L for -A and -AD treatments). The serum concentration of 25(OH)D₃ was also decreased significantly(P<0.05) by vitamin D restriction and the lowest concentration was seen at 18 months of age(53.7ng/ml and 61.8ng/ml for control and - A treatment versus 24.0 ng/ml and 24.5 ng/ml for -D and -AD treatments). After the restriction period of vitamins A and D, the concentrations of retinol and 25(OH)D₃ for - A, -D and -AD treatments were recovered at those of control. Dietary restriction of vitamins A and D did not affect carcass weight, backfat thickness, ribeye area, quality grade and yield grade. But marbling score was significantly increased by vitamin A restriction compared with control(6.73, 6.87 and 5.73 for -A, -AD and control, respectively). The results of the present study suggested that dietary vitamin A restriction could improve marbling score in Hanwoo steers.