• Korean Chemical Engineering Research
• /
• v.57 no.1
• /
• pp.5-10
• /
• 2019

In this study, electrochemical characteristics of artificial graphite coated with petroleum pitch using solvent method as anode material of lithium ion battery were investigated. As the solvent, n-hexane, toluene, tetrahydrofuran and quinoline were used. The surface of the prepared anode material was analyzed by SEM and TEM. Also the electrochemical performances of the prepared anode materials were performed by constant current first charge/discharge, cycle, cyclic voltammetry and impedance tests in the electrolyte of $LiPF_6$ dissolved inorganic solvents (EC:DEC=1:1 vol%). The coating thickness of the prepared graphite was about 100-500 nm and the graphite coated with THF solvent had a smoother surface than that using other solvents. It was found that pitch-coated graphite (THF) show the low initial irreversible capacity (51 mAh/g), the high discharge capacity (360 mAh/g) and coulombic efficiency (99%).

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.642-647
• /
• 2007

Determination of loading conditions for tube hydroforming(THF) process that implies an amount of the increment in axial feeding and internal pressure for each step is one of the most important constituents at the process design level. On account of the fact that those design factors mentioned above are imposed simultaneously during the process, suitable loading conditions are required to obtain robust products without any failure such as buckling, necking, bursting and so on. In which, especially, bursting is well known as the most frequently occurred failure in general THF process. In this study, therefore, determination of the loading condition based on the adaptive method was carried out to obtain safe loading paths. In addition, forming limit curves are applied to evaluate the derived loading conditions by using the simulation results. Consequently, it is found that described method in this study for THF process design is useful and has a feasibility.

• Journal of the Korean Ceramic Society
• /
• v.37 no.6
• /
• pp.517-523
• /
• 2000

Effect of catalysts, which was catalyzed by acid(HCl and HNO3) and base(NH4OH), on characteristics of the mullite powders prepared by sol-gel methdo wa sinvestigated by XRD, TGA, SEm AND BET. As a result, weight loss as a function of catalysts was in order of HCl=32.6%>HNO3=25.44%>Non=24.0%>NH4OH=22.5%. The mullite powder dried at 100$^{\circ}C$ appeared spherical shape in acid catalyst and different shape in base catalyst, but sintering powder at 1400$^{\circ}C$ appeared very fine particle of 0.05∼0.1$\mu\textrm{m}$ regardless of catalysts. In all cae, the pore quantity, which was capable to adsoprtion, was decreased with increasing temperature. In base catalyst, no change of special surface area in mullite appeared.

• Journal of the Korean Chemical Society
• /
• v.48 no.1
• /
• pp.28-32
• /
• 2004

The condensation reaction of (benzylene)triphenylphosphoranes with carbonyl compounds in supercritical carbon dioxide was examined. Reactions of (benzylene)phosphoranes (ca. 1 mmol) with several benzaldehydes in a supercritical carbon dioxide (80 $^{\circ}C$, 2,000 psi) containing THF entrainer (5%) in a 24 mL reactor proceed smoothly to yield olefination products in fairly good to excellant yields but slower, compared to reactions in a conventional THF solvent. Generally, phosphoranes that are not substituted with a nitro group show more (Z)-selective reactions with aromatic aldehydes under $scCO_2$ condition than in THF. The reaction of (benzylene)triphenylphosphoranes with 4-t-butylcyclohexanone gave the corresponding olefin compounds with a low conversion under both the supercritical carbon dioxide and the organic THF solvent. Our preliminary study showed the Wittig reaction carries out smoothly in supercritical carbon dioxide medium and also a possibile tunability of this reaction pathway by adding a entrainer. The results would be useful for devising a novel process for the environmentally friendly Wittig reaction.

• Journal of the Korean Chemical Society
• /
• v.27 no.3
• /
• pp.201-207
• /
• 1983

The rate constants for solvated electrons with benzene in the binary mixture (tetrahydrofuran-water) were measured at a various temperatures$(-18{\circ}C{\sim}+51{\circ}C)$ by photolysis. From Arrhenius plots of rate constants it was observed that the activation energies were decreased with increasing tetrahydrofuran(THF) content. Decreasing the viscosity of solvent mixtures by adding water, the rate constants were also decreased. It indicates that the reaction of solvated electrons are not controlled by diffusion. The change of activation enthalpy in kcal $M^{-1}$ and the rate constants in$ M^{-1}sec^{-1}$ were 4.90 and $8.80{\times}10^8$ for 30M% of THF, 2.80 and $5.14{\times}10^8$ for 49M% of THF, and -0.30 and %1.43{\times}10^8$ for 75M% of THF, respectively. The slope of the linear plot of activation enthalpies against activation entropies was $244{\circ}K$, which supports the reaction parameter is the change of activation entropy in the range of the experimental temperature. From the solvent effect on the activation energy, it was found that the step of the reaction, ${e_s}^-+B{\rightleftharpoons}B^-$ shifted to the exothermic reaction with increasing THF content.

• Journal of the Korean Chemical Society
• /
• v.45 no.5
• /
• pp.442-447
• /
• 2001

The charge-transfer compound (OMTTF)AuCl$_4$ was prepared from the direct reaction of octamethylenethiafulvalene (OMTTF) with HAuCl$_4{\cdot}xH_2$O in THF. (OMTTF)$_2PtCl_4$, (OMTTF)_2IrCl_6{\cdot}2H_2$O, and (OMTTF)Os$Cl_5{\cdot}THF$ were also formed using $H_2PtCl_6{\cdot}xH_2O$, $H_2IrCl_6{\cdot}xH_2O$ and $H_2OsCl_6$, respectively. The prepared compounds were characterized by magnetic (EPR, magnetic susceptibility), spectroscopic (IR, UV-Vis), electrochemical (CV) methods, and the powdered electrical conductivity measurement. The powdered electrical conductivities at room temperature were ~$10^{-7}S{\cdot}cm^{-1}$. The experimental results show that $OMTTF^+$ monocation radicals exist in all of the prepared compounds. The redox potential of OMTTF supports that $OMTTF^+$ is relatively stable. The magnetic properties indicate that there are significant magnetic interactions between the localized odd electrons on the central metal (Ir and Os) ions and the odd electrons resided on $OMTTF^+$ cation radicals in both (OMTTF) $_2IrCl_6{\cdot}2H_2O$ and (OMTTF)$OsCl_5{\cdot}THF$.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1993.04a
• /
• pp.125-125
• /
• 1993

Saikosaponin은 한방에서 중요하게 사용되고 있는 시호의 항염증작용 성분으로서 주로 염증의 후기 단계에 작용하고 있다. 그러나 현재 시호는 생약자체로만 사용되고 성분이 약물로서 개발되지 못하고 있다. 그것은 Saikosaponin의 용해성이 극히 저조하여 제제화하기 힘든 때문이다. 연자는 시호 Saponin의 용해성을 증가시킬 목적으로 시호 Saponin의 하나인 saikosaponin-a를 Pyridine 중에서 succinic anhydride와 반응시켜 6"-hemisuccinyl saikosaponin-a를 얻고 이를 THF에 용해한 후 KOH와 반응시킨 후 다량의 THF를 추가하여 hemisuccinyl esler의 potassium염을 합성하였다. 이 화합물의 용해도를 원래의 Saponin과 비교시험하였다.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.3
• /
• pp.295-298
• /
• 2003

α,β-Unsaturated aldehydes and ketones are regioselectively reduced to the corresponding allylic alcohols with /Dowex1-x8 system in THF at room temperature. This system is also efficient for the conversion of α-diketones and acyloins to the vicinal diols in refluxing THF.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.8
• /
• pp.720-724
• /
• 1996

Catecholalane (1,3,2-Benzodioxaluminole, CA) prepared from catechol and aluminum hydride in tetrahydrofuran (THF) is found to be a selective reducing agent. The systematic study in order to characterize the reducing properties of the reagent under practical conditions (THF, 0 or 25 ℃, the quantitative amount of reagent to compound) has been done. The reagent reduces aldehydes, ketones, esters and acid chlorides to the corresponding alcohols, and primary amides to the corresponding amines. Especially noteworthy is that the reagent can convert both aromatic and aliphatic nitriles to the corresponding aldehydes in very high yields.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.154.1-154.1
• /
• 2010

석탄가스화복합발전(IGCC)에서는 석탄을 가스화하여 얻어진 합성가스로부터 이산화탄소를 분리/회수하고 수소는 유용하게 사용할 수 있다. 이 기술의 핵심은 $H_2+CO_2$ (40%) 합성가스로부터 $CO_2$를 경제적이고 효과적으로 분리/회수하는 것이다. 본 연구에서는 합성가스로부터 $CO_2$를 효과적으로 분리/회수하기 위해 가스 하이드레이트 형성법을 제안하였다. 하이드레이트 형성 조건을 완화시켜 주기 위하여 열역학적 촉진제로서 TBAB, TBAF, THF를 첨가하여 열역학적 촉진 현상을 살펴보았다. 다양한 농도의 TBAB (10, 40, 60 wt%), TBAF (10, 34, 45 wt%), THF (4, 19, 31 wt%)에 대하여 3상 평형 (하이드레이트 (H) - 물 (LW) - 기상 (V))을 측정한 결과 40 wt%의 TBAB, 34 wt%의 TBAF, 19 wt%의 THF의 농도에서 가장 큰 촉진효과를 보였으며, 그 이상의 조성에서는 오히려 촉진효과가 줄어드는 것을 확인할 수 있었다. 순수계와 촉진제 첨가계에 대하여 하이드레이트 생성 후의 기상과 하이드레이트상의 $CO_2$ 조성을 측정하였다. 그 결과 모든 실험조건에서 하이드레이트상에 85% 이상의 높은 농도로 $CO_2$가 농축되는 것을 확인하였다. 이러한 과정을 반복하면 순도 99% 이상의 매우 높은 $CO_2$ 기체를 얻을 수 있다. 또한, 가스 하이드레이트 형성과정의 반응특성을 살펴보기 위하여 반응시간에 따른 기상의 $CO_2$ 농도변화를 측정하였다. 본 실험에서 얻어진 결과는 가스 하이드레이트 형성법을 이용한 합성가스 분리 공정 개발에 중요한 기초자료가 될 것으로 사료된다.