• 전기학회논문지
• /
• 제62권1호
• /
• pp.37-42
• /
• 2013

This paper deals with Wound Rotor Synchronous Motor (WRSM) purposely designed for Integrated Starter and Generator (ISG) installed in 42V automotive electrical system. Not only design objective and specifications of WRSM, but its adaptive design to minimize torque ripple and back-EMF Total Harmonics Distortion (THD) are considered. Furthermore, design characteristics of designed prototype have been investigated numerically in terms of torque, back EMF, loss, and efficiency, which are verified by performance comparison with Interior Permanent Magnet Synchronous Machine based on Finite Element Analysis (FEA).

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 학술대회 논문집
• /
• pp.333-337
• /
• 2005

We have studied the loss characteristics of the electronic ballast for the 250 watt HID lamps. The researched electronic ballast has a low loss, a low THD for input current and the other reliable characteristics. By the experrimental results and the analytical method, we concluded that the switching devices loss is 33%, and the Inductances loss is 42.6% of the total losses.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 춘계학술대회 논문집
• /
• pp.34-39
• /
• 2004

Fluorescent lamp operated at high frequency by the electronic ballast provide ballasts like unnoticed flicker effect and higher luminous efficiency. This paper presents analysis of Half-Bridge type resonant inverter for Fluorescent lamp drive for stable characteristic and life improvement of lamp operated at high frequency. Also, it has described an electronic ballast design with the capability of high PF (Power Factor) and low THD (Total Harmonic Distortion). The validity of designed electronic ballast circuit is confirmed by simulation and experimental results. The Designed electronic ballast is implemented successfully on 32W Fluorescent lamp system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(I)
• /
• pp.779-781
• /
• 1987

In phase controlled rectifier(PCR), harmonica are changed according to the variation of a firing angle. These harmonics are supplied with the input of the inverter. And then, inverter output comes about the harmonics combined with the switching frequency of the inverter. Hence the efficiency of the induction motor ia decreased by the harmonic of the inverter output. In this paper, it analyzed about an effect of these harmonics ia analyzed by a computer simulation. The total harmonic distortion (THD) in the case of PCR containing the ripple was considerably larger than THO of the DC source. Therefore, it was proved that the firing angle variation of PCR had to be limited.

• KIEE International Transactions on Power Engineering
• /
• 제5A권3호
• /
• pp.235-243
• /
• 2005

Line constants of the catenary system are estimated. The harmonic current that the Korean Train Express (KTX) injects into the catenary is measured to precisely analyze the harmonic effects. The Korean high-speed railway system is modeled by estimated and measured results. The system model is applied for predicting the harmonic effects. The simulation results from the system model are compared to field test data concerning the total harmonic distortion (THD). The reliability of the system model is verified.

• 한국안전학회지
• /
• 제20권3호
• /
• pp.47-52
• /
• 2005

Recently, power conversion equipment increased rapidly makes a lot of harmonics. Thus, it is growing that wrong operation and break down of sensitive devices. There are two kinds of causes of harmonics. One of them is lots of power conversion equipment as modem controller, inverter, converter and SWS(Switching Mode Power Supply). Another is nonlinear operating machines as transformer and motor. The more nonlinear loads like them grow, the more serious problems as harmonic current to source and low power factor because of increasing reactive power grow. It is installed for reactor and L-C Filter to decrease harmonic in general. This paper analysis and compares two of characteristics and harmonic from reactor and L-C Filter with operation of induction motor and power conversion equipment. In the result, L-C Filter more improves unbalance rate and THD than reactor.

• Journal of Power Electronics
• /
• 제13권6호
• /
• pp.1016-1023
• /
• 2013

Predictive current control offers the potential for achieving more precise current control with a minimum of distortion and harmonic noise. However, the predictive method is difficult to implement and has a greater computational burden. This paper introduces a theoretical analysis and experimental verification for an improved predictive current control technique applied to single phase grid connected voltage source inverters (VSI). The proposed technique has simple calculations. An ATmega1280 microcontroller board is used to implement the proposed technique for a simpler and cheaper control system. To enhance the current performance and to obtain a minimum of current THD, an improved tri-level PWM switching strategy is proposed. The proposed switching strategy uses six operation modes instead of four as in the traditional strategy. Simulation results are presented to demonstrate the system performance with the improved switching strategy and its effect on current performance. The presented experimental results verify that the proposed technique can be implemented using fixed point 8-bit microcontroller to obtain excellent results.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 전력전자학술대회 논문집
• /
• pp.395-396
• /
• 2014

3상 독립형 인버터의 비대칭 출력 전압은 부하의 불평형에 의하여 야기되며 암 단락을 방지하기 위한 데드타임은 출력 전압에 비선형적인 특성을 발생시킨다. 인버터가 불평형부하 구동 시 3상 출력전압은 불평형의 홀수배 고조파를, 동기좌표계 상에서 dq전압은 서로 크기가 다른 짝수배 고조파를 발생시킨다. 본 논문에서는 불평형부하에 따른 불평형 출력 전압을 평형으로 유지하는 동시에 공진제어를 이용하여 데드타임에 의한 불평형 고조파를 보상하는 전압제어기를 제안하였으며 10kW 용량의 독립형 인버터를 제작하여 제안한 제어기법의 타당성을 입증하였다. 실험을 통해 출력 전압의 THD는 4.3%에서 1.5%로, 불평형율은 4.3%에서 1.1%로 감소함을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.212-215
• /
• 1995

In this paper, The characteristic of Harmonic spectrum is studied for generally used three-phase diode rectifier. and filter design criteria is showen in the sense of THD, DPF, and PF. As the becoming of Automative and informative era, the demand of critical and stable control becomes more and more important. But much EMI emissions are generated for more critical and stable control in power electronic system these EMI emissions can be measured using LISN(Line Impedance Stabilization Network). So we are to investigate the behavior of Conducted EMI emission in Diode Rectifiers using LISN in frequency domain.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 추계학술대회논문집; 한국과학기술회관; 6 Nov. 1997
• /
• pp.205-209
• /
• 1997

본 고에서 소개될 내용은 기존에 계측기로 구성되는 시스템의 하드웨어 구성과 PC로 구성할 때의 사양 비교를 알아보며, 응용 프로그램에 있어 상용화된 프로그램 tool을 활용하여 응용 프로그램을 개발하는 기술과 지원 방안을 제시하고자 하며 엘텍에서는 이러한 하드웨어와 user 응용 프로그램의 완벽한 개발로 실사용자들이 보다 나은 시스템 환경에서 완벽한 시험/측정/분석의 업무를 수행할 수 있도록 지원한다. 또한 외국의 많은 업체가 이 프로그램을 이용하여 자체 시스템을 구축하여 국내에 소개되는 시스템이 많은 실정이다. 엘텍에서는 이미 NDT, AE, THD/전원 분석을 위한 시스템 및 프로그램 개발을 완료했으며 국내에 이미 소개된 시스템도 있다. 그러므로, 소음.진동 분야에도 완벽한 시스템 구축을 추진하고자 한다.